Hi Jordan! The Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle #DX76ER uses bearings and seals that are made overseas. They aren't really "branded", per se, but Dexter does have them made specifically for them. If you…
Hi Laurie! It's nice to hear from you. The Flap Jack is a great product but I would not recommend using the Flap Jack with your setup, mainly because your SnapPad brings the foot to about a 10 inch round diameter and the top of that block is…
Good morning Lisa! Yes these two brands come up a lot since they are both great quality, name brand options. NOCO makes solid jump starters like the 1,250A #NOC48VR, but one big advantage of Projecta models like the #VX63NR 1,200A and #VX73NR 1,400A…
Happy to help Richard, thanks for reaching out! Yes, the Stromberg Carlson High Speed Replacement Motor #SC68QR will work as a replacement for your 8532-07 landing gear motor, as long as your landing gear is a Lippert or Venture system. This…
Hey Alex. From the information I can find online it does look like your 2011 Keystone Cougar 318SAB does come prepped for a second AC unit. The bedroom roof vent should be reinforced and pre-wired for a 13.5k or 15k BTU unit. To check if your trailer…
Sure, I can help with that. I can see why the fitment notes are confusing. For a 2012 Toyota Tundra with the factory tow package and factory 7 way connector, you'll want a brake controller that plugs into the factory brake controller port under…
Hello William, I think you already found it! We don't have schematics for every camper showing exactly which components were installed from the factory. I was able to find an excellent YouTube video where they gave a tour of the Coachmen Pixel…
Welcome back Dan! The Trimax Universal Anti-Rattle Clamp item #TMX66SR is extremely effective at adding stability when used with heavy setups. Since last years upgrade to wingnuts from standard nuts and the inclusion of lock washers we have not…
In order to actuate your trailer brakes, you'll need to install a brake controller to operate them, as your truck doesn't already have a brake controller. Since your Dodge Ram 2500 doesn't have the factory 7-way, not all the brake…
Hey Russ, thanks for reaching out! There won't be an issue with clearance over your bed rails. The GooseTech 5th Wheel to Gooseneck Pin Box #MR84MV is designed to replace the Lippert Rhino and provide the 5–6" of safe towing clearance you…
You are correct, at least two of those remaining wires will need to be dealt with in order for your trailer brakes to function. On the Ram trucks equipped with the OEM 4-pole trailer connector, the blue brake output wire from the outlet under the…
On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…
Built for solid support, these camping chairs handle a 350 lb weight capacity for dependable seating. Great for relaxing at the campsite or in the yard, they offer straightforward comfort without fuss.
It sits low to the ground and gives a laid back feel. The back is tilted back just enough to settle you in. That closer-to-the-ground posture is great for lounging around the yard or campsite.
Yes, the back is tilted back just enough for a laid back feel. Combined with the low-to-the-ground seat, it's geared toward lounging. It's a comfortable setup for time around the campsite.
Expect a compact feel that still sits low and relaxed. The back is tilted back just enough, so it's set up for a laid back lounge. If you like to sink in and relax, that smaller size can feel super comfortable.
It's right at home lounging around the yard or campsite. The seat sits low to the ground, and the back is tilted back just enough. That combo creates a super comfortable, laid back feel.
Filters
