We do have the Replacement Pull Pin Kit #F500136 which is the part number 18 in the photo you found. We do not carry the part number 4 for the Fulton F2 Trailer Jack #F1413040134 at this time so you may need to replace the parts from another damaged…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Our trailer wheel and tires like the Kenda Karrier part #AM31990 that you mentioned do not come balanced. We do have balancing beads that you can use that will balance them for you like with the Counteract part #CA66VR which comes with enough to…
Trailer wheel and tires are not balanced typically which is why our wheel and tire combos like the part #AM31990 are not balanced. It doesn't really end up making a difference so we don't recommend it either.
The controller for your unit should be mounted separately to the air distribution box. It's hard to tell from the pictures you sent but if the wiring diagram you sent is correct for your unit then it's also showing it as a separate part from…
When bleeding the brakes on a surge actuator, such as the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR, you want to start by making sure there is fresh fluid in the reservoir then press a screw driver against the rod in the access…
The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
The 3,500 lb capacity Trailer Axle w/ Electric Brakes #e45SR has spring centers that are 80 inches apart so it wouldn't work as-is with 81 inch spring centers. You could use it but you'd have have its spring centers removed and new Spring…
You already did all of the work here by finding the bearings. Since you have a #25580 inner and #15123 outer bearing the Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K will work as a replacement. The only other thing to…
Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.
(13)
Filter Results
