Filter Results
$1,443.33 - $1,443.33
$1,493.10 - $1,493.10
Videos
for Bimini Top
Help Articles
for Bimini Top
Expert Answers
for Bimini Top
You already did all of the work here by finding the bearings. Since you have a #25580 inner and #15123 outer bearing the Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K will work as a replacement. The only other thing to…
view full answer...The Hitch Pin and Clip For 2-1/2" and 3" Hitches #337HP6256WC doesn't have a weight rating, but this is normal for a pin setup. These are tested to hold the weight ratings of the hitches they are made for so as long as…
view full answer...For some reason Ford and GM/Chevy OEM brake controllers tend to have a hard time working with brake actuators. Fortunately I have a solution for you from HydraStar. If your boat trailer is not already equipped with a 7-Way you can use the HydraStar…
view full answer...According to the folks at HydraStar, the ITBC or OEM brake controller on your 2020 Silverado 2500 isn't compatible with electric over hydraulic braking systems, unless the #HBA-CAM adapter module is used. Once the adapter is used along with the…
view full answer...Brake Assemblies like the Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K item #AKFBBRK-7 will have the description in the title that the brakes are free backing. We also offer the same size free…
view full answer...I have a few options for you to help with identifying the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find…
view full answer...The #AKHD-655-6-EZ-K hub would arrive with the grease seal, the races and the inner and outer bearings installed. The bearings are already packed with grease, so the hub is ready to install. I'd recommend using some additional all-purpose marine…
view full answer...There are a few things that you will need to know in order to choose the right disc brake kit for your 2003 DHM boat trailer. I assume you have idler hubs and are replacing your brakes so you already have a 4-bolt brake mounting flange #4-35 as well…
view full answer...Long story short, yes you can. But going with the ST205/75R14 would be a better replacement than a ST205/75D14 because the R in the first size means it is a radial tire whereas the D in the second size means it is a bias ply. The main difference…
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
view full answer...The 5 step #JIF52FR and the 4 step #JIF25FR will both fit your 2011 Godfrey Tritoon. This mounts underneath the deck so it won't matter that you have a curved front. Depending on where the supports are, and where you mount it, one of the corners…
view full answer...Yes, the Swivel Marine Trailer Jack with Caster Wheel - Bolt On - Sidewind - 12" Travel - 1,500 lbs #DL67MR is the same as the DL22802. #DL67MR is our part number and the part number from Dutton-Lainson is 22802.
view full answer...