12V Power Accessories - Extension Cord, Roadmaster

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

...with no additional parts to buy. The Blue Ox Patriot does not include a way to keep your tow vehicle charged, so you need to use the Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 (and the # RM...

...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part # BX7420 as we have found that the Blue Ox tow bars are a little...

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

...Bar and Safety Chains - Demco Commander II Non-Binding Tow Bar item # DM9511012 Base Plate Kit - Demco Tabless Base Plate Kit item # DM49YV Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire...

There is not another way to power the monitor on your Voyager WiSight 2.0 so you'll need to add one with the 12 Volt Outlet Kit, 20 amps #RM-9332. This kit is going to add a 12V cigarette lighter to your 2024 GMC Sierra 2500 and will allow you to…

Hello Jeremy, I sent that number over to lippert and they were not able to find anything. Can you please send me a picture of the sticker if it is still on there? Should have a S/N number and and RPO number, I included a picture of what the stickers…

...Thanks for reaching out, Todd! The flat tow wiring kit I recommend for the LED tail lights on your 2024 Jeep Gladiator is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit, and the correct...

If you are dolly towing a vehicle then the steering wheel actually needs to be locked whereas if you were flat-towing a vehicle the steering wheel needs to be unlocked. That said, I do not have any write-ups on how to do this. Generally speaking, you…

Hello Chris, thanks for reaching out. I went out to our warehouse and measured the etrailer Base Plate #e74FV. The thickness of the tabs is 0.45". The Distance between is 0.625" or 5/8". The pin hole is a 1/2" diameter. This base…

To install a battery disconnect, like the Deka Lead Quick-Disconnect Battery Terminal - Universal Polarity #DW05312. it is pretty straight forward, you are just putting a break or disconnect along the negative battery cable in the vehicle. These are…

...it have the standard bumper on the front? Pictures look like it has the standard factory bumper. The parts will be the same regardless of the edition. I recommend the following: -Roadmaster Direct-Connect...