BOLT Locks Specs:
Features:
This 5/8" diameter receiver lock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This coupler pin lock ensures that your trailer is securely hitched and helps keep it safe from theft while being stored. With this lock, you won't have to carry an additional key - it codes to your vehicle's ignition key.
More Information >BOLT Locks Specs:
Features:
This heavy-duty cable lock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your equipment safe and secure.
More Information >BOLT Locks Specs:
Features:
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.
More Information >BOLT Locks Specs:
Features:
This heavy-duty padlock codes to your vehicle's ignition key. Made of automotive-grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your trailer and equipment safe and secure.
More Information >BOLT Locks Specs:
Features:
This universal coupler lock protects your trailer from towaway theft. Lock codes to your vehicle's ignition key, and it's nearly impossible to pick or bump. Included lock, base plate with ball, and shackle fit most coupler and latch styles.
More Information >BOLT Locks Specs:
Features:
This 1/2" diameter receiver lock codes to your vehicle's ignition key. Made of automotive grade materials and nearly impossible to pick or bump, this corrosion-resistant lock helps keep your ball mount safe and secure.
More Information >BOLT Locks Specs:
Features:
This recovery hook helps prepare your Jeep, truck, or SUV for an off-road adventure. It installs on the tab of your aftermarket bumper and provides an attachment point for a rope, strap, or chain. It also locks with your vehicle's ignition key.
More Information >Videos
for BOLT Locks
Help Articles
for BOLT Locks
Expert Answers
for BOLT Locks
Hey Scott, No that's incorrect, you will need an adapter for both the Roadmaster Nighthawk #RM-676 and Sterling #RM-576 tow bars for use with etrailer Invisible Base Plates. So for both tow bars…
view full answer...Here is a list of the BOLT Locks which will code to the key on your 2024 Ford F-150. BOLT Trailer Hitch Receiver Lock #BLT99FR BOLT Trailer Coupler Lock #BLT69FR BOLT Covered Padlock #BLT59FR BOLT Coiled Cable Lock #BLT49FR BOLT Trailer Coupler…
view full answer...The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
view full answer...We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door…
view full answer...Thanks for reaching out, Mark! The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs #TJSCHD-24-4 are designed with 11 Gauge steel and install using…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...It appears the wiring to connect a Trailer Brake Controller #90195 on your 2024 GMC Yukon are going to be high up on your dash close to the left side of the drivers compartment. You can start by removing the left side panel of the dash which sits…
view full answer...New GM trucks don't have consistent 12 volts on their trailer wiring circuits. While this tends to not be a problem for trailer lighting it does not always work great with more sophisticated circuits…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item #C26VV is a class III hitch with a…
view full answer...The BOLT Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitch - Codes to Chrysler/Dodge/Jeep Key #BL7018448 will only work with certain model years and…
view full answer...Yes, the EcoHitch Front Mount Trailer Hitch Receiver #EH37FR will fit your 2024 Ram 2500 with the Cummins diesel engine. This is custom fit so you will not have to drill any holes to install.
view full answer...Filter Products (16)