2006 Cadillac BOLT brand vehicle and hitch locks

From the top of the B and W Tow and Stow part #BWTS10043B down to the bottom of the unused ball when it is in it's lowest position measures 14 inches. The 7 inch drop…

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775…

I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thanks for the picture! Yes, the BOLT Trailer Hitch Receiver Lock - 2", 2-1/2", and…

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball…

That's a good question, and there's an interesting reason why there are the long holes on the side…

BOLT locks key to the ignition key so that you can have everything unlocked with one key so that you're not carrying as much or as likely to lose the key. I recommend…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without…

Thank you for providing that information. It sounds like you already know this, but you want to choose a replacement equalizer that closely matches the one that came with the trailer. Since you have an…