Best Jeep Liberty Trailer Wirings

i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.

This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

This is a great adapter to retro fit connections on my 2011 Expedition. Simple to instal and great support from etrailer.com.

I recently had a receiver hitch installed on my 89 Silverado and the wiring was merely zip tied to the safety chain connection. Well that didn't sit well with me. I wanted a more permanent wiring connection point. So I purchased your 4 flat to 4 flat and 7 way plug and installed it. So far so good. The installation turned out perfect and it looks good. The test lights are a great thing as well. I couldn't be happier.

Click to Enlarge

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service

Click to Enlarge

Click to Enlarge

I used this outlet plug to have 12 volt to power our shuttle pump on the water wagon to pump chemicals into our chem farm mix tank works really well easy to wire and very nice looking very durable .

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.

Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.

Click to Enlarge

Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.

Click to Enlarge

Click to Enlarge

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.

Good quality and everything needed for install in my 2006 Honda Odyssey. Now I can easily tow with either a 4 wire or 5 wire since the harness retains both.

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Needed a longer connector for my vehicles. Both have 7 way plugs, but I use a trailer with a 4 flat plug. The coiled adapter works great for both of the vehicles. Very good product if you need some extra length and the fact that it has the coils makes for a better appearance.

ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.

Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.

Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.

Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.

My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors. I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all. I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Arrived on time and installing now

Worked exactly as I expected. I’m setting up my Jeep to flat tow it behind my camper.

Click to Enlarge

Click to Enlarge

Works great for mounting to the Jeeps for towing behind our RV!

Click to Enlarge

This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.

Click to Enlarge

II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.

Got this to replace the poorly constructed plug that came with the 7pin wiring kit. That plug broke at the spring hinge the second time I used it. Surprised that Hopkins didn’t include “Butt Connectors” though. Seems a little nickel dimeish. Had a good experience with Paul who refunded their price for the defective Kit plug as well as refunding the price difference for the wiring kit which had gone from $110 to $48. Overpriced to begin with but convenient. Paul did real good dealing with a pissed off Old Guy

This was exactly what I needed to convert the factory 4 pin to a combination 4 pin and 7 blade connector. It's been working great with both my trailers.

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

Click to Enlarge

Excelent Quality! Parts was a perfect fit for the factory location.

Click to Enlarge

Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.

Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.