Best Ford Transit Connect Hitch Adapters

This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.

Click to Enlarge

Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Installed my 2” hitch but don’t have a 2” bike trailer yet. I purchased this to continue to use my 1.25” bike trailer (until I find a deal). Used this over Thanksgiving weekend on I35 in Texas (tons of traffic)and I’m very pleased with the performance. I’m was secure and bikes traveled just fine.

I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.

Click to Enlarge

Click to Enlarge

Solid, bullet proof, yet the convenient swing away allows unrestricted access to the back of my vehicle. It is heavy, but being made of steel, it holds a heavy load. I have an old solid steel Thule rack that I modified so that I can move the bike carrier bars 180 degrees - from the traditional position carrying the bikes away from the car and carrier, or flipped over so that the bike carriers rest on my spare and carry the bikes between the rack and the car. This allows me to carry very heavy bikes, such as e-bikes compactly without extending the length of my vehicle much, and still allowing me to use the swing away feature of the Yamaha extender. Photo shows a light road bike on the hitch, but it works equally as well with heavier or multiple bikes.

Click to Enlarge

On our first trip the hitch worked wonderfully, but our bike rack failed us. On our second trip, the hitch bolts loosened and we constantly had to check to make sure it was not loose. Very disappointed in both products. We had them put on our vehicle by my adult son, who works with machinery. The product was poorly made and designed. This was not the fault of the user or the person who attached the hitch and rack.

The fact that it's steel is a plus, and it extends the hitch so that the bike rack that's attached now is far enough away from the hatch to not bang against it. Great product!

Ordered for our Kuat rear mount bike rack, as our SUV had a larger hitch receiver. Well built, clean machining and a perfect fit. Fast shipping and exactly as advertised. Great communication surrounding the order. Couldn't recommend more.

Exactly what I needed. Now able to add storage box and still pull tow Dolly.

Click to Enlarge

Etrailer’s customer is actually customer service. There’s real people who are there to help. Kate helped me get my order the next day after I realized I accidentally switched the billing and shipping addresses on the order form.

Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.

Click to Enlarge

The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.

Click to Enlarge

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

This extender does a pretty good job of keeping my bike away from the rear radar system in my Venza so the backup warning system does not engage in error. Beware it’s pretty heavy.

Love the rack and the folks at e-trailer got it to me remarkably fast. Everything looked great set up for the most part. The directions were very clear and it required minimal effort.

Shipped ahead of schedule in excellent condition. Kuat Pivot is built extremely well, heavy duty, and looks sharp.

Excellent product, solidly built and easy to install. I was hesitant because of the full size spare tire on the back ladder. The videos and the specifications (especially the sizing details) gave me all the info I needed to make the decision to install it on my Sprinter. The swing away rack gives me full access to the rear of the vehicle. I wish I had bought it sooner.

This swing away carrier is easy to connect and very quiet behind the rig.

Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built

Love it! It swings out of the way so I can get the back door open. The other advantage is it allows the back door to be open a few inches at night (when the hitch is in the locked position) for airflow when it’s hot.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This tow bar extension is a quality built product.. Very helpful backing a trailer.

I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.

Click to Enlarge

Click to Enlarge

This is sobeasy to install! It only took me 20 minutes. This definitely gives me much needed storage space for my 2023 Thor Scope 18M

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Stout and well executed. EASY to install. Could use some ergonomic tweaks (I’m 70), but overall is a very good value. We’ll see, cuz we haven’t gone 10K miles yet... etrailer rocks btw

Loved it !!!!!

I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.

At first I was skeptical but now that I’ve put it together I’m very impressed. This thing is heavy duty and pulls my trailer no problem. Korren did a great job helping me out. Excellent customer service.

Click to Enlarge

Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.

Click to Enlarge

I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.

Perfect for my application.

Everything was delivered fast and in perfect condition.

Click to Enlarge

Click to Enlarge