Best Chevrolet Malibu Trailer Wirings

Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.

I received this product the other day and went to work installing it on my 1993 Jeep Grand Cherokee Laredo. This was done outdoors on a sunny 90 plus degree day on [the driveway]. Prior to buying I had read the online instructions and, more importantly, watched an installation video. The video was a huge help and the kit was very easy to install. The snap splice connectors work like a charm. I used extra zip ties I had to secure the power line in place as I routed it down the passenger side of the Jeep. Hook up to the battery terminal was easy. I did not have a circuit tester to check the individual wires to ID their function but since their colors exactly matched the video, I decided to take my chances. It worked out great. Installation of the power wire would be easier on a lift but I don’t have one installed in my driveway so it entailed crawling under the

Click to Enlarge

Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service

Click to Enlarge

Click to Enlarge

I used this outlet plug to have 12 volt to power our shuttle pump on the water wagon to pump chemicals into our chem farm mix tank works really well easy to wire and very nice looking very durable .

A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.

Entailer has the website to find and deliver the parts I have needed to repair my trailering needs. Easy to find my same parts that needed replacing.

Harness is well made and shipped quickly and packaged perfectly

Took about 15 to 20 mins total to remove all the covers,Matt’s etc Wiring it in is so easy, only 4 wires, Use blue butt splice connectors instead of the ones it comes with. You can buy a small pack of ten for about 3 bucks, by doing this you will never have to worry about a loose connection. The video tells you what color goes where. I like to put a small price of electrical tape over every connector I do. Looks more professional and the wires can never come apart.

Works very well after re-wiring trailer lights with waterproof distribution box.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

Click to Enlarge

I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.

i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.

This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Click to Enlarge

The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.

ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.

Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.

fits the plug perfect....just got a goldwing used, haven't had a chance to ensure it (the bike) was wired correctly for a trailer. no fault of the product, just wish its wireing was a bit long due to the way the plug was intigrated into the underside of the tour trunk.

Click to Enlarge

Works great! Took a few minutes to figure out the rv side and get it set up so the round RV part Correlated in the correct way to the standard four flat wiring. But it went smoothly.

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

Great product no issues at all. Product as described & fit properly.

Pretty straight forward. I used it to switch my European trailer's connection to be able to connect to my Wrangler's 4-pin trailer hookup. No issues. works great.

Thank you so much for having videos to show how to install the items I buy.too cool

Just what I needed, Thank you.

The staff and products at etrailer are awesome

Product came on time and worked great. I’ve never ordered from Amazon preferring to order directly from suppliers.

Click to Enlarge

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

Click to Enlarge

Excelent Quality! Parts was a perfect fit for the factory location.

Click to Enlarge

Quick shipping, will order from them again!

Exactly what I needed and It's a great fit

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Needed a longer connector for my vehicles. Both have 7 way plugs, but I use a trailer with a 4 flat plug. The coiled adapter works great for both of the vehicles. Very good product if you need some extra length and the fact that it has the coils makes for a better appearance.

Worked excellently. No problems on the install.

I am enclosing 2 photos of trailer connector I purchased from etrailer. I have a 1995 Dutchman popup trailer. It had a 6 way round connector which would not fit my 2010 F150. By using your trailer connector diagrams, I was able to determine Dutchman was using white for the ground, blue for brakes, black for battery, brown for right turn/brake, red for left turn/brake, and green for tail lights. I replaced the 6 way with your 7 way connector.

Click to Enlarge

Click to Enlarge

Quality built product. This connector seems to take less effort to plug in to the 7-flat socket than others that I have installed. Metal housing provides great rigidity. I appreciate that they include the clip to stow the connector when not in use. If I could improve on it, I would prefer the manufacturer find a way to design the inside to be less obstructive to the 7 wires that have to pass through the middle. I use heavily insulated 7-wire harness, and had a difficult time squeezing everything in to the provided space. All said and done, very happy with the product and I do play on purchasing again next time I need another. I would recommend this to any professional installer. My application is 5 different trailers that include surge and electric brake assemblies in a fresh water marine environment on multiple types of vehicles. This produced is plugged and unplugged almost every day.

We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.

Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.