Best 2023 Ford Edge Towing Mirrors

I haven't road tested it yet, but it seems to strap on as well as could be expected from a universal fit product. Seems like the car mirror will still function and the straps will not damage the finish on the mirror. I used some rubber pieces from a bike tube to play it safe. Seems like an additional strap wrapping diagonal around the mirror on the edge closed to the car would mitigate risk for slipping off the tapered mirror.

After years of replacing mirrors from other sources I purchased a pair of these. There fantastic, plenty of adjustments. Got covid on vacation, really sick and did not properly install mirror. Not broken but scratched badly from asphalt at 55 mph. Purchased a replacement, scratched one is my spare.

Click to Enlarge

I purchased the KS3990 Universal Dual Lens Clip-On pair of mirrors and found them to be easily installed on my 2016 F-150 Ford truck mirrors. The on-line help video for the 2016 F150 was helpful. They seem to be fairly well secured onto the existing mirrors, which are NOT actually rectangular in shape, as was portrayed in the video. In addition to the upper outside corners, the lower horizontal edge (towards road) has a slight upwards tapering effect. I have test driven the vehicle with the 26 ft. travel camper in tow and the mirrors seem to provide much improved visibility on both sides. We will be taking a weekend trip in the near future to confirm that these mirrors are completely adequate.

Click to Enlarge

Click to Enlarge

Click to Enlarge

They fit my 2017 Ford Edge well. They stayed secure (I did add a couple of small bungees just as a safeguard). Drove from Colorado to Oregon and back and hit some really bad weather, the mirrors worked fine.

Easy to install and remove. Minimal vibration with a great field of vision. Great buy.

Click to Enlarge

Excellent product. Easy to put on. Took them off, put them in my camper storage. Next trip out, when I put them on, I did not even need to adjust them! The mirrors are slight contour and slight magnification, which makes them easy to see. There is virtually NO vibration during travel. (I have had others that shimmied so bad you could not see a thing.) I flip my driver side mirror in frequently to check my mail box, so it is not very stiff. So I ran a small bungee from the clamp to the grill under my hood. Did this for both sides. My driver side flipped in when traveling at interstate speeds, so I put a second bungee on it. Fixed the problem. Allen bolts at top of clamp are rusting after 2nd use. All in all though, I am very pleased with this product and it is well worth the money spent. It is the only product I could find to properly fit my 2011 Toyota Tacoma, because it clamps on the mirror frame and does not rest on my truck mirrors. Great Product!

Click to Enlarge

Click to Enlarge

The tow mirrors are perfect. They fit well and do exactly what we needed. Customer service was fantastic. I needed the mirrors sooner than the shipping date. I called customer service and the representative was ver accommodating- we received them even sooner than she had said. Have ordered from etrailer before and will continue to do si.

Easy on and off. We use them on a 2017 Ford Edge when we pull out camper.

The tow mirrors are perfect. They fit well and do exactly what we needed. Customer service was fantastic. I needed the mirrors sooner than the shipping date. I called customer service and the representative was ver accommodating- we received them even sooner than she had said. Have ordered from etrailer before and will continue to do si.

Easy on and off. We use them on a 2017 Ford Edge when we pull out camper.

Have not been on the road with the product yet but the extended mirrors snapped onto the mirrors of my 2014 Ford Edge very nicely. Looking forward to heading down the road with them.

Finally, we got extended mirrors for our 2016 Sequoia. OEM mirrors are manageable but inefficient when backing up or switching lanes with a Travel Trailer. The only issue with the extended mirrors is that they vibrate to the extent you get hypnotized. They work best at slow speeds, backing in campgrounds or switching lanes at slow speeds. Sixty-five miles, forget it. Use your best judgment. If the mirrors are well molded into place, the vibration may be minimized. The team at etrailer, from start to finish, was fabulous. Thanks

A nice alternative for temporary mirrors for trailer hauling. They didn't interfere with the remote mirror adjustment on the factory installed outside mirrors and held securely once adjusted. I used them on a 2019 Honda Ridgeline.

We needed these extended mirrors on our van when pulling our camper. They fit perfect on our 2014 E250. Husband was very happy with the added rear vision they provide. The mirrors stayed put and adjusted even on the interstate. Great purchase!

Mirrors vibrated at speeds above 50 mph. I repeated attempted to tighten them but I could barely make out vehicles in the curb side mirror. I replaced them with mirrors that clamp onto the bottom edge of the factory mirrors.

these towing mirrors fit my 2021 ford edge great thanks again

Simple design and effective Easy to install but my drivers side didnt fit to my mirror good Upper edge was up. Will function, just not quite right

I had some trouble installing the mirror extensions on my 2012 Chevy Tahoe. As you can see in the photo below, the J-hook with the flat disc is not long enough to reach the adapter. It measures 3 inches from the large hole in the shell to the inside of the OEM mirror. Since the J-hook is only 3 inches long, there is no way to attach the knob to it. All the other applications seem to place the large hole in the shell much closer to the edge of the mirror. The shell does fit very nicely to the OEM mirror with no gaps. I solved the problem by using 'ball bungees' in place of the J-hooks. These are used to attach tarps to metal frames, awnings, etc. I used three ball bungee's (2 on top and 1 on the bottom). I think these work much better. The extension mirror is tight against the factory mirror and the bungees hold it there without scratching the paint. I like this set-up much better so I won't need the KLV 4010 kit. You might consider a re-design. I didn't like the threaded J-hooks. It was very hard to screw on the knobs the first time without cross-threading them and I suspect they are prone to breakage. If someone bumps in to the mirrors in the parking lot, the bungees just stretch and nothing breaks. Probably a lot cheaper too.

Click to Enlarge

Click to Enlarge

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

I installed these on my 05 chev, they were hard to get snapped on the bottom so I used a small trim tool to pry them out far enough to hook over the edge. It was 30 degrees out when I was installing them and the did not crack so that is a good product. They vibrate going down the road but still better than not know what is behind the trailer.

Easy off and on. The fit on my outside rearview mirror is outstanding. Works great with my 24' Thor. The inside edge of the added mirror lines up perfectly with the outside edge of trailer. Very pleased with the product

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Basic product seems good. The suction pads could be a bit better- my MBZ. mirrors are very roundy at the outer edge, and the devise is a bit tricky to tighten enough to seat all 3 pads. Haven't driven with them yet, but hoping they stay put!

Not a good mirror. Second time using it fell off my car and smashed in road. Thank goodness it did not hit another car. The foam pads slid off and you can not get a good grip. I returned and they are sending me same one, because it was after 30 days.

Have not been on the road with the product yet but the extended mirrors snapped onto the mirrors of my 2014 Ford Edge very nicely. Looking forward to heading down the road with them.

I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.

Click to Enlarge

Low cost way to extend mirrors. Does not interfere with mirror movement at all. Also still keeps turn signal visible. Only removed 1 star as it is easy to scratch the plastic on the edge of the mirror housing facing the window when installing or removing the mirrors.

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Works great. They do work with the F150 mirrors that have the turn signals on the outside edge of the mirror. You just can't see the turn signal with the towing mirrors installed. Fit is excellent, no rattling or vibration. Easy 5 minutes installation.

Pictures of the mirrors in action, fits are perfect! They look way better than the extendable tow mirrors that are factory. They also let the auto fold function on the mirrors fold just fine.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fit is perfect; very good size mirrors; look better than the Ford extenables; I can take them off when not needed; lets the turn signals show through; the auto fold mirror function works with them on; very easy to put on and remove; look good on even a KING RANCH!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great option for a mirror extension that fits snug onto your existing mirror. Does not come off without effort because the positioning nut secures it (unlike the flimsy suction cup arm mirrors).

Good mirrors for towing 28 ft travel trailer... Only got 3 star as first trip went we went to leave on thursday 5-25 for our first trip and went to put on and the passanger mirror was missing the screw to hold it on so i had to zip tie it on...on tuesday i will be calling to see about getting a replacement screw for next trip and will see how customer service is...

They are ok for what they are. Easy to install and remove. They do not show as much as I thought but enough since I dont have factory tow mirrors.

I ordered these mirrors for my car in Oct 2021 at which time the website indicated they would fit my car. I only need them for towing during the summer so did not even open the boxes until this week, April 2022. Imagine my surprise to find out that the mirrors do NOT fit my car. I immediately sent an e-mail requesting process to return and exchange for mirrors that would fit. Today I received a response stating sorry they don't fit but our returns policy is 60 days and I was outside of that time. I should try selling them locally! I could understand if the mirrors were no longer carried by etrailer but they are still in stock. And I'm not asking for a refund but an exchange. Very disappointed in this company!

Very good quality construction. Very good fit for a non-custom mount. Thick rubber straps are stretched over the car’s side mirror and hold the mirror well. My car is a 2017 Ford Expedition EL. Note: when you fold in the car mirror the towing mirror partially blocks the progress so that mirror stops early. It is still folded but not as completely as without the tow mirror. And yes, they are two identical mirrors so on one side the straps go up, on the other side they go down.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

BUYER BEWARE!!!!!! I had great hopes for these mirrors. They look great. They appear to be very adjustable right out package. They fit on my Tacoma securely. They don't interfere with the function of the stock mirrors. Everything was moving along "swimmingly". Then I sit inside my truck to do the final adjustment (moving the actual mirror to get the correct setting and lock it into the "sweet spot"). The new Mirror is very stiff...doesn't want to move. Well, its new...so....Okay, I don't want to ruin anything...so.... No worries, I go get a phillips screwdriver to loosen the back screw a smidge so the friction adjustment can work . Come back start to back the screw out just a smidge...nope...still can't adjust the...wait...unscrew some more....that's not an adjustment screw at all. That just screws directly into the back of the mirror to hold it solidly in place. Worse yet, There is no friction mechanism on the back of the mirror at all. It is one solid piece of plastic. The molded plastic replicates the look as if it has the ability to move, but in reality....There is no way to do small mirror corrections once you have this thing installed. What the Actual people?????!!!!!!???? If you can't do minor adjustments to the mirror while you are in the vehicle, then the mirror is completely useless. I wouldn't recommend this product to my worst enemy. It's a piece of crap. DO NOT BUY!!!! A complete waste of time, money, and shipping costs. Now, I have to incur more shipping costs to send this POS back to etrailer. Hey, etrailer....Do Better next time!!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Basic product seems good. The suction pads could be a bit better- my MBZ. mirrors are very roundy at the outer edge, and the devise is a bit tricky to tighten enough to seat all 3 pads. Haven't driven with them yet, but hoping they stay put!

I bought these mirrors to use on our 2021 Jeep Grand Cherokee. I used them just a couple of times and have decided to look for something else. Despite my best efforts and watching (and re-watching) the online video that shows them being mounted on my exact vehicle, I found that the soft pads that grip the back of the mirror could not keep the mirror in place for more than 30 minutes or so. It was warm (mid-80s) when I used the mirrors and the heat seemed to let the pads slip too much. I tried several different positions and adjusted the tension straps carefully, but no luck. They seem pretty well made and may well work well on other vehicles, but they just don't work with my Jeep GC.