# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Not much to say about this. It serves the purpose, and I was a bit disappointed that the cotter pin wasn't included, but that much aside, I would highly recommend this company!
Solid, well-made item.
# 2
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 4
Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
Not much to say about this. It serves the purpose, and I was a bit disappointed that the cotter pin wasn't included, but that much aside, I would highly recommend this company!
Solid, well-made item.
# 5
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Product shipped on time and installed just like advertised. Have already use it to tow a trailer and had no problems at all. Very happy and would recommend etrailer to anyone.
Very heavy duty, worthy of its rating. Same durable finish that's on my other Curt hitches. Ball comes assembled to hitch so you don't need those huge wrenches to torque it down. Only down-side, I can't seem to make my etrailer e99007 anti-rattle hitch stabilizer fit without minor modifications.
# 6
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Not much to say about this. It serves the purpose, and I was a bit disappointed that the cotter pin wasn't included, but that much aside, I would highly recommend this company!
Solid, well-made item.
# 8
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
This is a very heavy duty kit that I can use for both of my vehicles and both trailers. The storage case is nice and handy. I got free shipping after coupling my order with my vehicle wiring kit that was also high quality. Etrailer is DEEBEST.
Was exactly what sales person said it would be, good quality steel, easy to use the different hitches, glad I got these. I like the options of the various hitches size
# 9
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
The hitch works great. The service was excellent!!! I'm going back and having a hitch put on my other car soon. Thank you.
Everything was perfect.! Nice paint, package, and fast shipping.! Im satisfied.!
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 11
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Great price, quick shipping
Product shipped on time and installed just like advertised. Have already use it to tow a trailer and had no problems at all. Very happy and would recommend etrailer to anyone.
# 12
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 4" Drop - 7,500 lbs
Good product for a 7500 pound hitch. No issues. Good price.
All of the products I've have bought for my trailer project from etrailer have been great. My go-to place for anything trailer related!
# 13
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
Product shipped on time and installed just like advertised. Have already use it to tow a trailer and had no problems at all. Very happy and would recommend etrailer to anyone.
Very heavy duty, worthy of its rating. Same durable finish that's on my other Curt hitches. Ball comes assembled to hitch so you don't need those huge wrenches to torque it down. Only down-side, I can't seem to make my etrailer e99007 anti-rattle hitch stabilizer fit without minor modifications.
# 14
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Product was everything it was described as. Works perfectly, and George even helped out by bumping my shipping up one level for no extra charge, which was freakin awesome.
Nice combination to go with my front hitch for the F150.
# 15
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 16
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Product shipped on time and installed just like advertised. Have already use it to tow a trailer and had no problems at all. Very happy and would recommend etrailer to anyone.
Very heavy duty, worthy of its rating. Same durable finish that's on my other Curt hitches. Ball comes assembled to hitch so you don't need those huge wrenches to torque it down. Only down-side, I can't seem to make my etrailer e99007 anti-rattle hitch stabilizer fit without minor modifications.
# 17
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
The ball mount was a complete failure even after a lengthy discussion on the phone. I wanted a ball mount that would accept the rocker ball and anti-sway bar. The bar sent to me can't be used this way. An email and phone message to the sales person I ordered with, got no response.
# 18
Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Drop - 5,000 lbs
Good product for a 7500 pound hitch. No issues. Good price.
I am very happy with my trailer hitch receiver from etrailer. I installed one on my 2011 Toyota rav4 for towing a small teardrop trailer I made during the pandemic. I also purchased a wiring harness to power the trailer lights from etrailer and after some doing have it working well. The cost of doing it myself was a small fraction of having the dealership do the work. The hitch receiver is easy to install as there are pre drilled holes to receive bolts in the frame. The wiring is a bit more complicated but I did it. God bless online videos. I'm happy with the results.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"