# 1
Curt Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Dont know what say, they are going to build this truck in april!! Thanks for quick service,cant wait to install.Thanks
product worked out just fine / GREAT!!!
# 2
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
I recently swapped out the stock 2" receiver for a 2-1/2" to allow me to purchase and use this extension to get past the end of my Lance 1010 Camper. I believe I will have no issues now towing any trailer (within allowable spec's) or carrying my motorcycle carrier. Great quality piece. can't wait to try it out...
# 3
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
As per my last 3 orders here are some pictures of how I received the item along with what was broke or bent. I can fix it but I shouldn’t have to. So I will try elsewhere from now on cant deal with your shipping dept , anymore.
# 4
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
My truck has a 2-1/2" receiver. I already owned a heavy duty 2" hitch. This 2" reducer & extender was perfect for my use. I used it to tow a rental trailer and needed to extend my receiver to allow me to tow with the tailgate down. This reducer/extender did the trick. I had plenty of room making tight u-turns. The quality of the product is very good. I would recommend this product to others.
# 5
Buyers Products 3" to 2" Receiver Tube Adapter
Unfortunately this receiver adapter did not fit my Ford F250 3" hitch, way too tight. Worked with Arthur from e-trailer to obtain a return/refund. After looking at reviews, I see many other folks had the same issue. If I were e-trailer I would pull this item from my product offering.
When I went to use this my bike rack would not fit in the 2" receiver because it was poorly made. Unfortunately it was well past etrailers 60 day return policy so they told me they would not help me. I contacted buyers myself and they were happy to help me and took the old one back and shipped me a new one that works great. If buyers did it for me, they certainly would have done it for etrailer but etrailer couldn't be bothered with it. I will buy buyers products again but will not buy anything from etrailer anymore. They also told me I would need to buy a whole new $XXX base for my bw companion hitch because the parts were not available. A quick call to bw and my. $XX parts were on their way. Again,poor service from etrailer. Back to local shops for me.
# 6
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
This hitch worked well on my Kona electric. Etrailer provides outstanding service. Will definitely purchase from this quality company again.
Excellent product, very sturdy. We have been using them on our trailers for years.
# 7
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
Excellent Selection, great products, easy website, super fast delivery, Thank you, etrailer.com!!
This item performs exactly as one would expect a chunk of metal that fits into another chunk of metal. I ordered this one because it fits flush with the end of the oversized hitch on my F250. As always it was a pleasure to deal with E-Trailer!
# 8
B&W Hitch Receiver Reducer Sleeve - 3" to 2-1/2"
I love the small ears on the edge that prevent this Sleeve from sliding into the 3” receiver while trying to slide in a hitch. After a year shows little signs of rust even though it has been left on the truck entire time. Of course I leave on the truck since I have a locking hitch pin.
Good quality, it's going work out great for the time until I upgrade to a better hitch.
# 9
Draw-Tite Reducer Sleeve with Collar - 3" to 2-1/2"
Well made now can open tailgate
As stated the front hole on the reducer is 3/4”. I will weld a 5/8 piece of pipe in the reducer to make it work for me. That same reducer with two 5/8” holes would be great but I will make it work. I have a 3” receiver on my f350 with a 5/8” pin so I don’t know why the would make the reducer with a 3/4” pin hole. As always though you have great products and service. Thanks
# 10
Replacement 2-1/2" to 2" Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches
This comes with the hitch. Don' have to order seperately. Will use it for another truck.
I needed to replace my reciever reducer FAST and I ordered it for next day delivery and got it right on time.
# 11
Trailer Hitch Receiver Reducer Sleeves - 3" to 2-1/2" or 2"
Quick and easy ordering and delivery. The hitch receiver reducer sleeve fits perfectly.
Exactly as described. Fit down to my 2" hitch items. It was slightly difficult to get all sleeves and item aligned and insert the hitch pin but we made it.
# 12
Blue Ox Hitch Reducer Sleeve - 2-1/2" to 2" Trailer Hitch
Fits just right. Set up with no issues. Using to adapt my truck 2 1/2” receiver to my 2” bike rack.
Works like a champ. I’d gotten a new truck with larger receiver and obviously didn’t want to buy a new ball mount for our weight distributing hitch. Using the adapter initially hurt my head as a ‘band aid’ solution, but it worked flawlessly on a recent 2000 mile trip. Zero regrets; will never hesitate to use it.
# 13
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 14
Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
Got one at harbor freight didn't fit got one from trailer,fit perfect
Fits well and serves the purpose for the locking hitch. Its the right length and the pins are hidden out of sight
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"