# 1
Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks
Excellent product!! I generally don't like to have to assemble things once I receive a shipment, but this was truly so easy to assemble. I purchased the locking anti-rattle bolt, bike rack and hitch (hitch was installed by UHaul for $45.00) for a 2015 Toyota Prius with the package 5. Just took it out this weekend with 2 bikes on the rack and could not tell it was back there!!
I bought the etrailer draw-tite sport frame hitch receiver and it was a perfect fit for my Prius V - 5, the mechanic thought it was made by the manufacturer. I'm very happy with my purchase!
# 2
Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks - 7'
The trailer fits and holds two bikes on my Prius. Only catch , it needs a mechanic to install because it is too difficult to reach under the vehicle.
I bought this rack for my 2010 Prius. The bike rack is easy to assemble and very sturdy. What proved challenging for me was getting the 1-1/4" shank to slip into the hitch I had installed by U Haul. After some pounding, it finally went into place. How I'm going to remove the rack from the hitch is probably going to be a challenge. The bikes are held very securely and I hardly noticed them as I drove. etrailer was great. They promptly answered question I sent by email, and the rack arrived within a few days of submitting the order.
# 3
Thule Snug Tite Hitch Lock and Anti-Rattle Device
Protect your investment!! I bought this to go with my thule roadway 2 bike rack, its a solid lock that prevents any movement from the rack
A local garage installed it for me at a reasonable cost, and it all worked without a "hitch!" Great pick for my 2016 Prius.
# 4
Anti-Rattle Hitch Lock and Cable Lock for Hollywood Racks Bike Racks
We purchased this rack for our Plug-in Prius because we wanted an easier way to get bikes on the car. It has worked like a charm. Very well designed and solidly fabricated. Also easy to install and uninstall. We have had fun moments waiting in line for ferries, with two bikes on the Hollywood in back, and two kayaks on top. It is something of a show stopper. Though Toyota does not recommend installing hitches, it is not clear what the problem is because it has worked well.
awesome lock set! The keyed alike hitch pin and cable with 4 keys are a great design idea. Also, the lock for the hitch pin can just be snapped onto the pin and secured without having the key inserted. I also have a Rocky Mounts Rack and that requires the key to be inserted and in the unlocked position to secure it on the hitch pin. Hollywood does it better!
# 5
Hitch Tite Anti-Rattle Hitch Lock for Saris Bike Racks with 1-1/4" and 2" Shanks
The hitch lock spans my new 2.5 inch receiver with about 1/4 inch to spare and is now lockable. The original hitch tite pin is the same length but the lock on this item locks from the side and makes better use of the pin.
Thanks for keeping me posted on my order, Korren. It arrived when promised.
# 6
Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 2" Shanks - 8-1/2' Long
This lock does not work with the Swagman XCT2 tilt rack. The diameter of the pin to too big to fit through the whole. Plus, the wholes in the rack where the pin is inserted has no treads so this lock and cable are useless. It appears I wasted $ on this purchase.
# 7
Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers - 1-1/4" and 2" Hitches
Very sturdy lock that fits my bike rack. I didn’t hook the bike rack up to the trailer hitch but the photo shows that it fits. There is other locks on the market but I highly recommend this lock!
I'm happy with the product but have one observation. The length of the hitch pin is about 3/16 inch too short to use with the included washers. I can only get it to lock correctly with no washers. Thanks
# 8
SportRack Hitch and Cable Lock - Keyed Alike
The hitch pin broke on the first trip with the SR2415 bike rack carrying 3 bikes. This rack is rated to carry 4 bikes and the hitch pin is compatible with this bike rack. As you can see in the photos, the color of the outer shell is different from the inner metal of the nut, which I perceive as the nut is not made of the same metal all throughout. Not sure why. The cable lock is NOT compatible with this rack and eTrailer should correct the answer registered on this site regarding this, which I had asked before purchasing this. Etrailer shipping was as always fast but unfortunately this product is seriously bad and is risky to use. Luckily my bike rack did not fall off the hitch and did not go flying on to other cars. I had to go to a local hardware store and buy a 3.5 inch length 1/2 nut and bolt, which worked just fine while returning.
# 9
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
A must have for the Swagman XTC-4 bike rack. Sure, I want to protect my bikes but I needed something that would protect my $200+ bike rack, too. You need a wrench to tighten the bolt, which does a good job of keeping the rack from rattling but is a pain because you always need to have a wrench around. But that's not the fault of the lock. The lock is pretty neat in that you can rotate the key hole so it's covered up to keep mud and weather out. I'd buy it again if needed and the price here at etrailer.com was good.
Great product. Fit bike rack / trailer hitch just as stated. So glad I found it online.
# 10
Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
Works exactly as described. Secures my Go Rhino bumper step, and keeps it from rattling. Only problem is I wish the bolt head was 3/4". Most socket sets don't go beyond 3/4", so you'll need a 7/8" box wrench or Cresent wrench to install/remove it.
Arrived quickly. Easy to install with the excellent video and instructions. I installed on my 2012 Forester with the Curt hitch I had previously purchased from etrailer. The locking hitch pin completely stopped my hitch rattle.
# 11
Advantage Threaded Trailer Hitch Receiver Lock for 1-1/4" Hitches
Exactually what we needed to lock an extension adapter on our trailer hitch from 1.25 to 2.0” for a bike rack. Worked perfectly. The screw lock keeps the bike rack from rocking and the locking mechanism safeguards the whole package.
You might think no one would take the trouble to loosen a bolt and steal your bike rack but we found out otherwise. This bolt and lock will do the trick to keep our rack safe!
# 12
HitchMate Threaded Trailer Hitch Receiver Lock for 2" Hitches
Emily, was great to deal with. She took an interested in my need , did some research and solved my problem. Great job!!
Works perfectly on my old sportworks rack. Thank to the other reviewer for mentioning it worked on his. There was a gap between the lock and the hitch. I bought ten fender washers to fill the gap. For the price, it was an excellent purchase from eTrailer.
# 13
Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers - Keyed Alike
It was a perfect fit
I purchased the cargo carrier and did not realize it had a ferrule welded into the receiver so that the etrailer proprietary hitch pin lock would have to be ordered. Upon receiving the hitch pin I discovered the ferrule installed into the carrier was not threaded. I was told this was an error from the factory. Since I had installed the carrier and we'd had rain, there were some rust areas. I was told I could not return the carrier. I now have a carrier which I cannot lock and two locking hitch pins I cannot use. I've been a long-time etrailer customer and have recommended etrailer to others. I shall not order from etrailer in the future nor will I be recommending etrailer to others.
What our customers are saying:
"Excellent-fast service.Thank you!"