# 1
B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K
my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350
Will at eTrailer.com did a great job walking me through the 5th wheel hitch and air lift options that I needed. The B&W Companion Slider Hitch installed like a charm, and looks to be great quality! Nice fit and finish, B&W.
# 2
Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 18K
Well built fifth wheel hitch. Haven't got a chance to tow our new Montana High Country 295RL. But I know a guy that has towed his fifth wheel with this same hitch. I'm sure this 18K hitch will be excellent! Or I wouldn't have bought it. I recommend e trailer for everything.
Item works exactly as described. I have a shortbed (6.5') Ford F350. Probably towed our 5th wheeler 5000+ miles with no problem. Then last year it happened! We were making a sharp turn in an uneven lot and POW, the 5vr hit the rear window and it exploded. After that I became gun shy about turning with the 5vr attached so I started looking at sliding hitches. A slider that you had to get out and unlatch to make work, didn't make sense to me. At what point do you get out? So, an auto slider hitch was purchased. Now when I get to a certain degree turn the auto-slide hitch moves back in its carriage and then auto-slides to the normal location once straightened out. Not gun shy anymore. Pro: Well packaged Well made Easy install It WORKS. Cons: Price Very heavy Some clunking after it straightens out from a turn
# 3
Demco Autoslide 5th Wheel Hitch w/ Slider - Single Jaw - Ford Super Duty Prep Package - 21K
Ford F-250 Super DutyVery high quality product. Used on a extended cab short bed F250 and the sliding mechanism provides plenty of clearance between the Fifth Wheel front and the truck's cab. Fits Ford's factory fifth wheel bed mount holes perfectly. Used to tow a 42' fifth wheel regularly. Foot print is small enough to allow me to retain my tool box in the truck during towing. The hitch is heavy! Do not plan to try to install with one person with out an engine hoist or gantry crane. Two strong people can, but extreme caution should be taken as the hitch weighs nearly 300lbs and is awkward.
2022 Ford F-350 Super DutyI have a F350 Super Duty Short bed. This slider works as expected. The ease of backing or tight turns makes this product excellent without the need to pulls pins for extension. I can remove or install in 7 minutes without a problem without any assistance. I am pulling a 44 foot trailer and have not experience any chucking or sway even in windy conditions. Tows very smoothly
# 4
B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
Extremely easy install. You will need a torque wrench that’ll go up to 110 ft/lbs. glad I did my research and went with the B&w gooseneck hitch in anticipation of getting this 5th wheel companion hitch at a later time.
Fast shipping and the box was in perfect condition. I appreciate the amazing customer service. They were friendly and had a good attitude when I called with questions. I look forward to shopping with them in the future. The shipping company called ahead of time and scheduled the delivery because it was such a large item they were friendly and was within their timeframe. Thank you etrailer.com I appreciate it.
# 5
Curt Q20 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package - Dual Jaw - 20,000 lbs
Got here about four days early. Packaging was great. Haven’t used the hitch yet, but have used the Q24 for ten years. I really like Curt products and etrailer has the best prices I have found. Great service. Highly recommend.
I gave it 4 stars only because I haven't experienced the operational aspects of the 5th wheel hitch yet. That will happen in the coming months when we put the hitch to work. The packaging was a little beat up but all the pieces were in great shape and the nuts and bolts were there. The assembly went well, directions are easy to follow step by step. The only issue I had was with the 4 bolts that connect the plate assembly to the slider assembly. They were in an award place which made it somewhat difficult to start all 4 and tightening them without the correct tool. You really need a ratchet wrench to snug them up. I couldn't get to them with my 1/2" torque wrench to I used blue lock-tight a long with the supplied lock washers and hand tightened them the best I could which should be fine, I'll check them along with the other 8 on the slider assembly after a couple of trips to make sure all is good. There is some timely maintenance you need to pay attention to, that I haven't experienced on other hitches but it's no big deal. From a construction standpoint, it's well built, I like the cast pieces, not alot of welds to worry about or check on from time to time. The slider assembly is well thought out and works as it should with a fool proof locking mechanism. The double jaws should provide ample clamping power. The pivoting head also appears to be well thought out and should provide plenty of tilt for those award hookups you find yourself in from time to time. So far I'm please with the equipment and the price I paid for it. Not to mention FREE SHIPPING. Your definitely getting your money's worth in a sound, well built 5th wheel hitch assembly.
# 6
B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
From the start,the folks at etrailer were very courteous and helpful. I called many times during the decision making process and everyone was always right there to help. When I finally decided to purchase the B&W 18K Patriot w/slider Bailey was there to help with the order. She explained the free freight shipping and it was a done deal. It arrived 1 day earlier than stated, as soon as I opened the cartons it was in fact the good ol' American made quality I was accustomed to growing up. I proceeded to install on the B&W rails I purchased and installed locally on my 2022 F250 Lariat/ Tremor.I had a small hick- up with the install and etrailer gave me B&W's # as they like to handle issues themselves. Stephanie at B&W was just as courteous. Overall a very pleasant experience. The Patriot was basically plug and play. I then connected my 2021 Grand Design 303RLS Reflection and rolled down yhe road. What a smooth and quiet ride, loved it! I would definitely recommend etrailer and their products. Thank you all that helped.
So far so good. Hitch appears to be good quality. It was easy to install after installing the mounting kit. I haven't used it yet so I can't comment on how it handles when pulling a camper.
# 7
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised. The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution. We are very happy overall with this hitch, and plan to keep it . Thank you.
# 8
Curt A16 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package - Dual Jaw - 16,000 lbs
Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.
2017 F250 curt A16 slider Ford prep package
# 9
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Underbed - 18,000 lbs
This was the best solution for my Dodge RAM 2500 towing my Alliance 340RL 38' 5th Wheel. My son helped me install the rails under the bed and now it is very easy to remove the hitch when I am not using it. It is very strong and I highly recommend this for anyone with a short bed truck.
When you use google chrome it does not move you to the next page to custom fit. So it just tells you your truck shows you the product and I order 6k worth of items without putting in the custom specs that you don't know to hit. Somehow with the info I put in my two other products work but this one doesn't and I have to pay for shipping to this to fix it. Wish if you ordered 6k worth of Items they would be a little more understanding that their site does not walk you what needs to be done and help you fix the problem without charging you more. Prep and Puck systems are two different things now I know.
# 10
Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs
So far it works great. Only pulled in a short distance and backed it up into my driveway. Make sure you have help lifting this. Very Very heavy. Directions were average but got the job done. Love the extra turning radius on my short bed F250. Make sure all the parts are there. The handle to release the king pin off the hitch was not in the packaging. The box that the hitch and slide came in were all in tacked and looked good. Emailed etrailer and within a few hours they sent were processing the order for the handle. Arrived in 2 days. That's great customer service.
Looks like a received a returned hitch. All my hardware is missing. And still waiting on one box. The sliding rails. Starting off to a bad start.
# 11
Curt E16 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package - Slide Bar Jaw - 16,000 lbs
Bolt coming out on roller wheel, rusts very quick, and locking arms don’t pull that well or easy from outside of the bed
Ford F-350 Super DutyDoesn't operate as easily as I hoped. Sticks when trying to slide which means jumping in and out of cab many times. Also its heavy as it should be,but it doesn't come apart easily for removal in two pieces that can be lifted separately. You need a winch to remove it safely. Its a pain in the you know what. I like my old two piece hitch better. I could take it in and out in a few minutes, but it won't work in my new f350.
# 12
B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider for Ram Towing Prep Package - Dual Jaw - 20K
Works as expected. Installation was almost perfect. I had to do a little physical persuasion on one clip to get it to line up correctly but nothing a big hammer could not fix. But with confidence from a reliable company.
This is our send fifth wheel hitch. We had issues with the first one due capture plate. This one doesn’t require one. Live and learn. This one is worth spending more money due to its quality. They also provided us with great customer service. We definitely recommend this product as well as this business.
# 13
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Underbed - 21,000 lbs
This hitch has been used daily since i purchased it. I deliver fifth wheel travel trailers all over the country. This hitch has worked flawlessly from day one. This hitch is one of the only products that I've ever bought that is exactly what it was described to be. Im not one to do reviews, so the fact that im doing this one , in itself, says a lot about the quality of your product. The design and looks are much better than any other hitch ive seen. It just looks better in the truck bed than others do.
Instructions left alittle to interpretation when it came to hitch height in the bed of the truck. For a f350 super duty it is the medium set up. Save you some time and effort. Other then that it looks great and will be testing it out this weekend.
# 14
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 21,000 lbs
This review is for the Demco Autoslide 21k and accompanying OEM rail adaptor I purchased for a 2020 Ram 3500 Megacab DRW. I've owned it one year. Overall, the hitch performs as I expected. It is high quality, very sturdy and seems like it will last for a long time. I had it installed at the dealer when I purchased the truck. It automatically slides to protect the cab in my 6'4" bed without any incidents. I tow a standard fifth wheel RV. There are a few negatives, which are not necessarily shortcoming of the product but, instead, necessary evils to allow me to have a short bed. First, it is BIG and BULKY. I believe this is just a function of the mechanism required to allow the autosliding feature and I am not really sure there are any other lighter alternatives with this feature. The fact it requires two parts (OEM Puck Rail and hitch), make it even more bulky. It takes up almost the entire bed and prevents most auxillary tank / tool box combos from fitting. Even standard size storage bins will not fit in my bed. I would prefer if they had a custom OEM all-in-one hitch for my truck like they do for the Ford. It adds significant weight, which decreases carrying capacity, which can be at a premium in hauling a heavy fifth wheel. I've never even tried to take it out of the bed due to the weight and difficulty. I also am not very happy with the adjustable catch plate design. It requires significant manipulation loosening and tightening 8 nuts when hitching and unhitching. This requires a step ladder to reach the nuts. I also found out after the fact that it does not come with the right size catch plate attachments for my hitch and I had to purchase a separate part, which added unexpected expense and delayed my taking the RV on its first trip. Overall, I am satisfied with the hitch.
I wish the place I bought my camper would have recommended this from the start. Makes owning a 5th wheel so much easier!
# 15
Curt E16 5th Wheel Trailer Hitch w/ R16 Roller - Slide Bar Jaw - 16,000 lbs
Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.
Well, I haven't towed with it yet but we'll see how that goes. I purchased this hitch because I needed to drop the height as much as 6 inches. My previous hitch was dropped to the lowest setting and still 17 inches high! This E16 goes down to 14 inches... Assembly was straight forward and all pieces were present ( even 4 big washers which were not illustrated anywhere in the instructions as to where they went) The hitch seems well built but the welder needs to be more thorough in cleaning his Slag (got my finger good when I picked up the top plate) Stickers were falling off everywhere (my heat gun fixed those) But a couple notable design flaws... The top cradle for the 5th wheel plate is a triangular shaped arch and the top plate has an axle which is perfectly round. So when the 5th wheel assembly is down in the cradle, there are only two little points of contact instead of the cradle fitting uniformly around the axle rods...we'll see what kind of wear this causes. Next, the green ring on the indicator rod looked like a 3 year old toddler wiped lipstick on it. (Green paint is supposed to be in the little groove cut in the rod but instead, is smeared all over the end of the rod) Lastly... The side plates have a two rows of holes for height adjustment...I have installed the bolts to position the overall height at the lowest possible setting. However, there are two more holes in the tie plate but the casting prevents the sideplates from dropping down even lower. Definitely confused as to what the extra holes are for and disappointed that I can't drop this even lower... Definitely seems heavy duty, but again, I haven't towed yet, so hopefully the play in the base rails doesn't translate into obnoxious clanking and rattling.... If so, I will definitely be doing another review
# 16
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.
This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."