# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The carrier itself appears to be fine. My issue is that I bought it for a Ram Promaster 3500 (Winnebago Travato) and the rise shank combined with basket height do not allow access to back doors. Obviously when the carrier was loaded I wasn’t expecting access, but I wanted to be able to open the rear door when the carrier was empty (I.e., access my power cords, water pump/faucet, etc.). I was hoping to be able to just take off my two coolers from the carrier and have the same access, but no luck. I’ll be looking for a new one that does not have rise shank and slightly smaller basket height.
Went together easily, Sturdy, Exactly what I needed
# 2
23x59 Stromberg Carlson Cargo Carrier for 2" Hitches - Steel - 500 lbs
Reasonably priced items and received in a short time frame. Thank you.
Carrier and box will be moved to hitch on 209 Solitude Rv to provide extra cargo carrying ability
# 3
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
I flip house. My main truck a RAM, the box is full of tools. I bought this curts cargo carrier to avoid buying a trailer or taking tools out of my truck just to run to home depot, etc. for supplies. I love it. I can install in receiver by myself, remove it myself allowing me to use my truck to buy supplies. I've loaded cement, doors, paint buckets, my large chop saw, jack hammer, its a great strong additional area to help me work daily. Well worth it.
I ordered this on line and with reviewing customer comments. My husband was excited when it showed up. We assembled the rack in our living room while watching a football game. We easily attached it to his Dodge Ram truck. He will be heading out to elk camp in a few days and now has plenty of space for his extras. It arrived just like we wanted. Happy we got it. It did not come with the rear reflectors like it shows only the sides. Thanks, a Montana girl.
# 4
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 5
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
Good deal for the price.
product arrived quickly and the box is in good shape.. I haven't opened it yet as it ius 18* out.
# 6
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
product arrived quickly and the box is in good shape.. I haven't opened it yet as it ius 18* out.
Good deal for the price.
# 7
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
I flip house. My main truck a RAM, the box is full of tools. I bought this curts cargo carrier to avoid buying a trailer or taking tools out of my truck just to run to home depot, etc. for supplies. I love it. I can install in receiver by myself, remove it myself allowing me to use my truck to buy supplies. I've loaded cement, doors, paint buckets, my large chop saw, jack hammer, its a great strong additional area to help me work daily. Well worth it.
I ordered this on line and with reviewing customer comments. My husband was excited when it showed up. We assembled the rack in our living room while watching a football game. We easily attached it to his Dodge Ram truck. He will be heading out to elk camp in a few days and now has plenty of space for his extras. It arrived just like we wanted. Happy we got it. It did not come with the rear reflectors like it shows only the sides. Thanks, a Montana girl.
# 8
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I wish the load capacity was a bit higher, but overall I am satisfied with the cargo carrier. It is perfect for lugging my two dog crates behind my vehicle instead of inside the vehicle. Thank you for offering a dimensionally larger cargo carrier than most retailers.
# 9
23x47 Carpod Walled Cargo Carrier for 2" Hitches - Steel - 450 lbs
packing box arrived damaged. content slightly damaged, contacted etrailers and no joke,received reply within minutes. settled for a reduced price, (my choice] great product and exceptional customer service. would recommend this provider and product anytime!
The cargo carrier came exactly as billed. It was simple to put together and was perfiect for my first two dump runs.
# 10
24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs
I bought this to carry a Westinghouse igen4500 on the rear of my 5th wheel. So far it's been perfect for the job. The quality is very good. The carrier is sturdy and is highly adjustable. I searched for a long time for the smallest carrier that would fit my generator with the greatest weight capacity. The TorkLift, while a bit expensive, fit the needs perfectly. I had extra reinforcements welded from my trailer frame to the hitch point, added an anti-rattle receiver lock and we now have the perfect generator carrier solution. Hope this review can save others time in their search for the same kind of solution.
The Carrier is perfect, we had one previously. It perfectly fits and clears our spare tire. The Firman 4000/3200 Generator fits perfectly. We did add some damping pads under the wheels and the feet of the Generator to prevent vibration. Great security mechanism. Highly recommend this tray and other Torklift Products. Note: we rarely use the gas furnace, the exhaust is right there, heat shield blank to deflect heat if needed.
# 11
16x21 TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches - 200 lbs
Very good quality for different types of generators. Again, I would’ve gave it five stars if it wasn’t for the price. But it is very well quality.
Hello. The unit fits great. I installed it on the front hitch mount of my 2000 GMC K3500. I’m using it with the Craftsman 2500 generator using the top slot. The unit allows me to permanently install the generator out front and keep it secure. I have a campsite truck camper that does not have an onboard generator. The TorkLift lock and load was a great solution. I added a set of turnbuckles for a nice snug fit while traveling down the road.
UWS Aluminum Cargo Carrier Review - 2012 Dodge Ram
Today on our 2012 Dodge Ram 1500, we'll be test fitting the UWS 23x51 Aluminum Cargo Carrier, part number UWS03511. Now, we've already gone ahead and installed our cargo carrier into the hitch and put our hitch pin in, securing it to the vehicle. This is what your carrier would look like on your truck. Now, we'll go ahead and give you a few measurements. The cargo carrier's closest point to the back of the vehicle is 4 inches and it will add an additional 28 inches of overall length to your vehicle. The ground clearance at the back of the carrier is 17-1/2 inches.
Surco Folding Hitch Cargo Carrier Review - 2012 Dodge Ram
Today on our 2012 Dodge Ram 1500, we'll be test fitting the 24x60 Folding Cargo Carrier by Surco, part number 52018F. Now, we've already gone ahead and installed our cargo carrier into the hitch. We've lined up the hitch pin hole and installed our hitch pin. With the cargo carrier in the stored position, this is what it will look like on your truck. Now, we'll give you a few measurements. Your ground clearance with the cargo carrier folded is 17-1/2 inches and from the closest point of the cargo carrier to the back of the vehicle is 4-1/2 inches.
Curt Folding Aluminum Cargo Carrier Review - 2012 Dodge Ram
Today on our 2012 Dodge Ram 1500, we'll be test fitting the Curt 20x60 Folding Aluminum Cargo Carrier, part #C18100. Now, we've already gone ahead and installed the cargo carrier shank into the hitch, line up the hitch pin and installed the hitch pin. So our cargo carrier is secured to the vehicle. We'll go ahead and give you a few measurements here in the stored position. We'll then fold the platform down and give you a few more measurements. In the stored position, the closest point of the cargo carrier to the back of the vehicle is three and a half inches and the ground clearance 13 inches.
Curt Hitch Cargo Carrier Review - 2012 Dodge Ram
Today on our 2012 Dodge Ram 1500, we'll be test fitting the Curt 20x48 Cargo Carrier for both inch and a quarter and two-inch hitches, part #C18145. With our vehicle equipped with a two-inch hitch, we've already installed our adaptors so we're ready to go ahead and fit it. We'll simply place the cargo carrier shank into the hitch, line up the hitch pin hole and insert our hitch pin. And with our safety pin installed on the other side of our anti-rattle bolt, our cargo carrier is secured to the vehicle. And this is what it would look like on your truck. Now we'll go ahead and give you a few measurements.
What our customers are saying:
"Just a note to let you know i recieved my cargo carrier for my 2008 Lincoln MKX. It arrived in a timely manner and all in order. The cargo carrier and light kit was a breeze to put together and performs very nicely. I will most definately use yall again and have sent others to visit your web site. Thanks....Randy"