# 1
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
I purchased the 3500 lb. set w/4" drop. Wish they made a 2" drop. Install was fairly easy, but most of your time will be consumed with alignment measurements, acquiring shims, and making adjustments. I was lucky to have a very square trailer frame. However, the "slop" in the all of the mounting bolts (especially, the spindle mounts) is more than the 1/8" window they specify. You will want to preload all bolts before tightening, and then measure for alignment/toe-in. The units are supposed to have camber built-in, but it's not near enough (more shims). Also, this suspension has more travel then the documents indicated. I had to re-mount my fenders 1" higher to keep the tires front hitting. When fully loaded, you might have 1" of travel left. All that being said, the ride is better than I anticipated. It's less bouncy than a torsion axle, and very quiet. If I was building a trailer from scratch, I would use this system, again.
Very nice quality, I had to call Timbren with a question very good company to deal with and etrailer is a first class company very good customer service.
# 2
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" - 3,500 lbs
No problems or issues with quality. Assembly went well. The price was fair and shipment was packaged excellently. Freight was a little slow, possibly due to Covid or product shortage and across nation travel. No problems with assembly due to attached paperwork. Very good results. Thank You.
I can not say enough about how good your product is! The installation went very smooth. I would highly recommend your product. It was great to see that everything comes with it right down to the grease.
# 3
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
Parts fit as advertised, very satisfied with purchase. I new nothing about replacing a trailer axle info on web site and support provided were excellent. Definitely would recommend etrailer
Good axle and great customer service
# 4
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
These axles work great. I replaced three axles on my trailer last fall (2022) with these axles. I was able to install the new axles and springs in about 3 hours because everything matched up very nicely - thanks to the help of the folks at etrailer.
I installed the Dexter axle on my trailer yesterday, and I was very impressed with the quality and the ease of installation. The install took much less time than expected, and this was helped by the hubs having the bearing pre-installed, what a bonus! This is a great solution to replace a fried axle, I highly recommend it.
# 5
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
I have had this axle on my trailer for a year now and could not be happier with it. Customer service was great dealing with them. I would highly recommend getting items for your trailer from here.
# 6
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer. Your staff was of great help finding my right axle. I would recommend etrailer to everyone.
# 7
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
No totally satisfied with the service I received since I wasn’t communicated on the logistic timing of sending the product out until four days after buying the products. I had to call several times to know what was goong on.. More comunication is needed.
These axles were a perfect retrofit for a vintage tralier rebuild/mod. Service at etrailer was excellent. The parts were easy to fit with a little care. I would recommend this product and this supplier to anyone looking for trailer parts.
# 8
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
Five star. shipping was slow. Product was great 14 K 14 plies under 2000 pounds independent suspension. Low fast and sassy. Yep that’s how I build them.
Received promptly in good condition. Have not installed as of yet. Looks substantial.
# 9
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
Actual trailer weight 1540#, 210# tongue weight. 1310# suspension load. After 600 miles, both springs collapsed making the suspension rigid. Have received replacement springs from Timbren but haven't had a chance to try them out.
These things look sweet! Cant wait to install them. Fast delivery! Great!
# 10
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
Be warned! I would not buy from Etrailer ever again. We received our order and Etrailer failed to send the entire trailer axle kit. They did not include one spindle in the kit, rendering our order useless without ordering an additional spindle. Because more than 30 days had elapsed before reporting the issue, Etrailer refused to send the spindle, in addition to insinuating that I was deceiving them. This must be how they increase their revenues…don’t send the entire order, and if the customer does not catch it within 30 days, the customer loses and Etrailer makes more money. Absolutely horrible customer service from the company who failed to fulfill their end of the contract while accusing me of being deceptive. One star is far too generous for Etrailer and their scams.
Very pleased with the design and heavy duty construction of these axles. Used them to build an off-road trailer and they performed flawlessly throughout many challenging trails and off road situations. My only complaint is that the ez-lube hub design does not take grease very easily. I've had to disassemble the hubs to properly grease both bearings due to the inadequate amount of grease flowing into the bearings.
# 11
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.
# 12
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs
Check your order! I specifically ordered Dexter axles and they sent me generic ones.
# 13
CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
Great product. I bought the harbor freight trailer last year and within a couple of weeks I had problems with one of the Hubs. The bearings went bad and the made in China hub had a crack in it. Could not find an exact replacement and tried a bunch of trailer stores around the Chicagoland area. Then a few months later the other hub started to wobble when I got home and replaced it also with a close match but not perfect. Every since then the camber was off and I didn't feel safe driving on the highway. After a year of looking I finally found this website and they had the Hubs and axle to replace the bad quality of the made in China original one that came with the harbor freight trailer. Took a couple of easy hours to replace and I couldn't be any more happier. Drove it on the highway for 50 miles and everything is still nice and tight so far and it looks way better too. Plus, the easy lube system is the best part! George kept in contact with me from the beginning to the end letting me know that it shipped and that it arrived at my house. 2 days to get to my house! I will be back to purchase more things in the future!
It’s a great looking axle. This is perfect fit for the trailer I purchased from the discount hardware store. Straight forward to install. It was a pleasure working with everyone at etrailer. Couldn’t be happier. i have just one outstanding question. My old axle was round 1 3/4”. Are most people reusing old bracket (which I decided to do) or buying square bracket and if so what size? i have included some pictures of trailer and also some closeups of bracket holding axle to spring. Once again a pleasure doing business with etrailer.
# 14
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
I purchased two of these axles to replace my old square ones. They appear to be good quality but they arrived damaged. The grease fittings on the ends were smashed because packaging wasn't adequate. I've emailed back and forth and was shipped the wrong parts for replacement. In the end I was told I'd have to cut the spindles off and replace them. All I need is new grease zerks that thread on the ends of the axles. Be prepared to purchase these on your own because customer service is subpar on a remedy and the way they package them for shipping does not prevent damage.
The axle is of great quality, I had to have mine fabricated a bit to match the old spring seats.but I wouldn't hesitate to buy the axle. The shipping and customer service is top notch from etrailer. Excellent products, services and shipping...
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"