Best 2010 Chevrolet Equinox Trailer Wirings

this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.

Click to Enlarge

Click to Enlarge

Works great on our 2015 Chevy equinox!

Exactly what I expected it to be and it was delivered very promptly

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

Very easy install. My truck had a precut hole in the bumper for the plug. I then hooked the spare 4 pole plug into a Reese Universal mounting bracket and mounted it onto the hitch.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service

Click to Enlarge

Click to Enlarge

The adapter works great when I need to pull our utility trailer. Having the LED's on the adapter makes it easy to verify the wiring integrity of the tow vehicle if a trailer light is not working.

Love the built in tester

Useless- how many towed vehicles are within the three foot length of this cable? Do not order this with the wiring kit for your towed vehicle that lets you use the vehicles tail lights instead of the magnetic lights. The tow bar between your motorhome and the "toad" is around 4' long. I'm not sure what this can be used for.

Well made

As the video indicates, ensure that your vehicle wiring is the same as the 7 blade definitions. Mine was not. Had to determine what color wire connections to use for a 4 flat adapter use on a dolly.

Service from erailer is always quick and efficient. The one time an incorrect product was shipped, the company beat a path to my door to get the right item into my hands. Every experience with them has been 100% positive. Great folks!

Product is exactly what I want, but should include a dust cover. Also, wire that leads from plug is too long, and the tail light wire is too short. Where they connect should be closer to the plug, because the way it is you can't really unplug it from underneath the vehicle.

Works great , eazy install.

Works very well after re-wiring trailer lights with waterproof distribution box.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

Click to Enlarge

Worked exactly as I expected. I’m setting up my Jeep to flat tow it behind my camper.

Click to Enlarge

Click to Enlarge

Works great for mounting to the Jeeps for towing behind our RV!

Click to Enlarge

Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.

Good quality and everything needed for install in my 2006 Honda Odyssey. Now I can easily tow with either a 4 wire or 5 wire since the harness retains both.

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.

Quick shipping, will order from them again!

Exactly what I needed and It's a great fit

I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.

Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.

The stuff not here

Very difficult to make the wiring connections, I was afraid I’d have problems on down the road so, I took it out of circuit and threw it away

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Click to Enlarge

The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.

This trailer plug has everything I wanted. I have a 5 way plug on my boat trailer, I can still use it with a 4 way plug and I will be able to use it with the travel trailer I am planning to buy. I have not yet installed it but I unpacked it and it looks very well made. I have purchased other products from eTrailer and I have not been disappointed with anything's price or quality. Bob

Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.

Click to Enlarge

Very easy to install.

Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer

Click to Enlarge

Click to Enlarge

Heavy duty plug that has a good snug fit and I like the jacketed cord that provides strength and extra protection.