Most Popular 0 - 5 Feet Long for 2010 Chevrolet Equinox

this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.

Click to Enlarge

Click to Enlarge

Yep, very satisfied. Thx

Useless- how many towed vehicles are within the three foot length of this cable? Do not order this with the wiring kit for your towed vehicle that lets you use the vehicles tail lights instead of the magnetic lights. The tow bar between your motorhome and the "toad" is around 4' long. I'm not sure what this can be used for.

Well made

Worked exactly as I expected. I’m setting up my Jeep to flat tow it behind my camper.

Click to Enlarge

Click to Enlarge

Works great for mounting to the Jeeps for towing behind our RV!

Click to Enlarge

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Click to Enlarge

Click to Enlarge

When I ordered this harness I thought I was getting a standard 7 way for a conventional trailer with brakes. What I actually got was a harness made for a camper/RV hook up. The wires have all the colors you would expect but all the lights/turn signals are coded into the plug completely different. After spending a good deal of time carefully matching, soldering and heat shrinking all connections to my new trailer harness, I was very dismayed to find only the brakes actually worked. After a bit of research I found a schematics page on the etrailer site and discovered the problem. As this is a molded plug I could not take it apart and just reposition the wires inside the plug. Another full hour or more of rewiring followed and now all is well. The harness itself is of very good quality but was not labeled/identified properly. This could have been prevented if etrailer would clearly label this harness as a camper/RV harness only.

Ordered 1/28 - showed shipped 2/1 with estimated delivery date of 2/6. It had a USPS tracking number that would only show the label was created. Never showed the product moved. After two contacts with customer service I was told they can't track the package until a certain date. I was notified 2/17 my package would be delivered that day. Not sure what contract etrailer has with USPS but I can track a tin of cookies to Pittsburgh, PA I think they can tell me where my $[XX] package of parts is at.

Very good quality.

Just what I was looking for. Most of these are 36-48 inched. This one is 60 inches. Perfect for 4 down towing.

Click to Enlarge

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

Click to Enlarge

Click to Enlarge

After a year doing its job well.

Quality flat wiring extension.

I ordered some wire and electrical parts to rebuild my 16' lawn service trailer. These folks had good prices and everything was in stock, well packed and shipped promptly and for a reasonable fee. These site also has helpful articles on wiring selection, color codes, etc. Very helpful.

Click to Enlarge

Used this on my 2018 Equinox for my flat tow tail lights.

Click to Enlarge

I fitted the Hopkins 5-way flat connector harness with a 5-way round plug which couples to my Goldwing trike (tow vehicle). The popup trailer lights operate as designed.

This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.

Exactly as described and what I needed. Delivered quickly.