Most Popular Car Hauler for 2008 Toyota FJ Cruiser

These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.

It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!

These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!

Click to Enlarge

Click to Enlarge

Click to Enlarge

When I ordered my kit from etrailer to replace the double-eye leaf springs on my 1970 Shasta Trailer, I decided to save a few bucks and get the bolts at my local hardware store. Big mistake! You wouldn't think a simple 3 inch bolt would be hard to find in your local hardware store. But in fact, i checked five hardware stores and none of them had this particular bolt. What a waste of time! I should have learned my lesson by now, and just give all my parts business to etrailer.com. I have probably spent more than $1000 in the past several months refurbishing our 1970 Shasta. Totally satisfied with the selection at etrailer, and the service is second to none!

Click to Enlarge

Click to Enlarge

Made a nice little trailer to haul wife’s golf cart!

Click to Enlarge

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

Click to Enlarge

Click to Enlarge

Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.

Click to Enlarge

Product is as described, installation was easy & performed as expected.

Click to Enlarge

I ordered these to help reduce the rolling (tilting) of my 18' travel trailer that I use off-road. Also, I am hoping it will absorb some of the shock. I have added some photos of before and after installation. The installation was simple, I used 5/16" sheet metal screws instead of the bolts supplied. Time will tell if they work as expected. As you can see from the photos, I have previously added an Etrailers shock mount kit to my axle. I made custom lower mounts that I welded to the axle and used the supplied upper mounts.

Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

Click to Enlarge

Click to Enlarge

After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.

Click to Enlarge

Click to Enlarge

Ordered a lot of parts for a dump trailer rebuild in Sept. Didn't install some of the final parts until Christmas break. THEY SENT COARSE THREAD NUTS INSTEAD OF FINE. I ruined 2 u-bolts and need all 16 fine thread nuts. I'm outside 60 days so I was told I'm on my own. I've spent $5k+ on etrailer. I'll find some place else.......

Click to Enlarge

Click to Enlarge

Axels are a perfect fit for my trailer and are working great.

Shipped fast looks good will be putting it on my trailer this weekend.

I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks

Great to get these high quality suspension parts to finish the axle modification on my travel trailer. The thick gauge of the metal makes it easy to weld the parts in place. I appreciate that they were available without having to buy a entire axle tube assembly!

Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES

Click to Enlarge

Click to Enlarge

Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.

My manufactured trailer did not have this type with a grease fitting. They wore out the bushing in no time. I really like the design and ability to lubricate the bushing.

About a year ago, I replaced my leaf springs, dry shackles with wet shackles, upgraded the bushings to brass, and I also installed sumo springs on the trailer,the trailer is very stable on the road, neither wind or semi trucks push the trailer, not that they ever really did but these sumo Springs made it much better. All the plates and things that were loose in the trailer no longer bounce around and are found on the floor at the end of a trip.

Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.

Click to Enlarge

Click to Enlarge

When I asked questions about my order they answered back quickly. Everything fit like it should. Yes time will tell if the springs are good.

I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!

Click to Enlarge

Product was as advertised and work perfectly. I like your company and have purchased many items from you. The shipping was very good and arrived shortly after the purchase.

Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.

Quick delivery and exactly what I needed to repair a broken shackle (which happened when the E-brake was triggered).

Great product fast service...

I had to adjust my U-bolts a bit, but after that, the plates will do the job.

Only received 1. Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.

My axle was maybe a 1/4" from the bottom of the trailer, so I replaced the 2" shackle with this 3-1/2" and so far so good.

I was very disappointed when I received the shipment from etrailer and only half the parts were there. When I made the order I was told everything was in stock and would be shipped.

Easy installation holding up well.

The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.

Click to Enlarge

Can you believe that etrailer asks for reviews after a year? That's confidence in their products! The Torflex Life Kit for my 2014 Casita 17 Deluxe Independence has worked great. I no longer drag going through dips and up my steep driveway.

I made some brackets to bolt to the frame. Now I have 100% contact with the Sumo Springs. The are working extremely well!

Click to Enlarge

Easy install. It took me approximately 3 hours for the entire project. That's cleaning a few things up also. I did not notice much difference in "body roll". Honestly,, I never had much before. Now, anytime going over rougher roads, railroad tracks, etc.... That was a big difference. It took a lot of that movement out. I hardly knew the trailer was going over it. I installed these on a 5th wheel.

Click to Enlarge