# 1
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.
# 2
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!
# 3
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
I purchased this kit for the standard 5' x 8' 2,000 lb. trailer from Lowes. I did an axle flip and added larger tires. This is the perfect kit for this trailer. It went on easy, and the bolts were slightly longer. Also the bolts in this kit were fine thread instead of course thread. Overall an improvemet over the factory hardware and I had no issues. Shipped in a timely manner and packaged well. I highly recommend this kit if you plan on flipping the axle or need a replacement.
Moved my axle below the leaf springs, works a lot better for my needs now. Paul helped me put an order together, got it shipped that day and delivered two days later. Quality parts and outstanding customer service.
# 4
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.
# 5
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
My manufactured trailer did not have this type with a grease fitting. They wore out the bushing in no time. I really like the design and ability to lubricate the bushing.
About a year ago, I replaced my leaf springs, dry shackles with wet shackles, upgraded the bushings to brass, and I also installed sumo springs on the trailer,the trailer is very stable on the road, neither wind or semi trucks push the trailer, not that they ever really did but these sumo Springs made it much better. All the plates and things that were loose in the trailer no longer bounce around and are found on the floor at the end of a trip.
# 6
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 7
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.
Though I have not yet installed the Lift Kit, previous reviews confirm they will work well on my Escape 5.0 TA fifth wheel. Being in Canada and hearing about the poor condition of packages and product being delivered, I had some concerns. However not only did the package arrive sooner than expected, it was fully intact and in good condition. My overall experience with eTrailer has been flawless - thank you!
# 8
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
New bolts made replacement of springs easy
# 9
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle
My small dumping trailer was bouncing and swaying all over the place. After installing this shock kit, it follows along like a dream. A more than worthwhile investment. Easy to install, great customer service. Thanks!!!
Not a trailer, but... We needed a set of shocks for a three-wheeled motorcycle truck conversion for our resort/farm in upper Thailand. I had to pack it in my luggage for the trip over. The vehicle came with no shocks on the back axle and the ride was really bad. This kit, with a bit of modification, really did the job and the ride is now significantly better in terms of smoothness and handling. Shocks were a bit long, but it worked out OK.
# 10
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole
Brandon was very knowledgeable about what I would need to replace my axles and springs, right down to the sizes for bushings and bolts. I have been using trailer for many years because their service is awesome.
Trailer is back to new again.
# 11
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!
# 12
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
When I ordered my kit from etrailer to replace the double-eye leaf springs on my 1970 Shasta Trailer, I decided to save a few bucks and get the bolts at my local hardware store. Big mistake! You wouldn't think a simple 3 inch bolt would be hard to find in your local hardware store. But in fact, i checked five hardware stores and none of them had this particular bolt. What a waste of time! I should have learned my lesson by now, and just give all my parts business to etrailer.com. I have probably spent more than $1000 in the past several months refurbishing our 1970 Shasta. Totally satisfied with the selection at etrailer, and the service is second to none!
# 13
Torflex Lift Kit - Single Axle - 2-5/8" Lift
The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.
Can you believe that etrailer asks for reviews after a year? That's confidence in their products! The Torflex Life Kit for my 2014 Casita 17 Deluxe Independence has worked great. I no longer drag going through dips and up my steep driveway.
# 14
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
great product
# 15
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
I think the lift kit is a very stout piece of hardware. I'll be installing it on Friday on an Airstream camper. Will give an update on how well it fits after the install. I gave 4 stars because the packaging could be better - almost lost some bolts or nuts. The delivery person had to tape it all up - must have fallen in travel and busted open.
I ordered this kit in mid-May after seeing an email about it from a competitor site to etrailer.com. I ordered from the other site then got an email stating that the kit was on back order from Dexter until the end of June. I googled the Dexter part number and found that etrailer.com also sold it, and even better, etrailer was offering free freight and a slightly lower cost. Since the kit is heavy, free freight would save me about $40, so I cancelled the order with the first company and re-ordered from etrailer.com. I got an email from them as well about the extended back order but then, I also got a follow up call from them explaining the situation. The call was an extra added touch that I appreciated. Then, right at the end of May, I got an email stating that my Dexter kit had shipped, so I figured that etrailer.com must have put some pressure on Dexter to get off their butt and ship it! The kit itself was great, really well made parts, powder coated and heavy gauge. Honestly, I am surprised that they sell it for only $150. The install is tricky and will take you 6 hours if you are good with tools and like wrenching. Don't attempt this project on your own if you are not. Pay a trailer guy $400 to do it. You have to keep the axles aligned when you drop them...and the bolt placement is not great so you have to have hands that can fit in the tight cramped space and be able to get a wrench on the. Over all, I am very happy with the lift, it was a pretty simple and cost effective way for me to get better clearance for my Airtsream.....Airstreams are notoriously low and with the approach I have from my street to the driveway, I constantly battled dragging either the hitch or the rear. This kit solved that. I am super satisfied and highly recommend it if you are in the same situation as I was. Buy it from etrailer.com, they have the best customer service I have experienced when buying trailer and camping items on the internet.
# 16
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
These brackets used in conjunction with the new u-bolt kit made switching my trailer axle from being above spring to under spring. This has raised the trailer about 3 inches in height from stock. I have a new set of wheel and tires coming and this should take care of the slight slope as seen in the picture. After installing everything, I took the trailer for a test drive and it tracked nicely and behaved very good on the road. No problems.
# 17
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.
# 18
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Great to get these high quality suspension parts to finish the axle modification on my travel trailer. The thick gauge of the metal makes it easy to weld the parts in place. I appreciate that they were available without having to buy a entire axle tube assembly!
# 19
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks
# 20
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Shipped fast looks good will be putting it on my trailer this weekend.
I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.
What our customers are saying:
"The phone operator was very helpful and made my purchase easy. I will keep this website handy."