# 1
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Coming in at about 45 pounds, the D900 Curt Multi-Ball Adjustable Ball Mount is a BEAST! I purchased for use with my '08 Expedition towing either a small utility trailer w/ 1 7/8" ball or my DooLittle Bullitt cargo trailer w/ 2" ball. I needed 5 inches of drop (at least) for both. This is just about the only economical mount in which to accomplish this. Most if not all two ball mounts are 2" and 2 5/16" balls. Many reviews comment on the length that this mount sticks out and initially that was a concern of mine. Please see the Q&A of the D900 product page to address those issues. Short story: A hollow/tubular extension shank of (about or greater)15" reduces vehicle hitch capacity by 50%. The D900 shank and other components are SOLID steel. No reduced capacity. Specifically in my case; this extra length will allow me some personal maneuvering room when hooked up to the DooLittle and raising the lift gate of my Expedition. Clearance between raised lift gate and cargo trailer was about two inches using my old shank, and I should about double that. The anti-rattle tightening bolt is a nice touch. This is my first Etrailer purchase, but not my last.
VERY sturdy piece of hardware here. I was worried it might be a little flimsy piece of metal. Not so, this is a substantial hunk of engineering and I feel safe putting anything on the back of my Expedition! Fully adjustable and easy to install, just like it says!
# 2
Flash Secure Adjustable 2-Ball Mount w Chrome Balls - 2" Hitch - 6" Drop, 7" Rise
Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer
ball mount fits loosely in the receiver so that the pins that extend out from the ball mount shaft through the holes in the receiver don't extend out far enough, for my liking. This is because since the ball mount shaft has so much play, it will shift to one side. Then, the pin on the other side does not extend all the way out of the hole so that it is not flush. True, i am being paranoid. However, i imagine a case like a crash where enough force could pull the shaft out from the not fully extended pin side to release the trailer to wreak more damage. I would just feel more secure if the pins went out further through the receiver or the shaft was not so loose. Otherwise, i really like the product a lot... enough to give it four stars... :o)
# 3
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
# 4
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
This is a beast of a drawbar, solid forged steel & well finished. It's also very heavy and E-Trailer needed to ship 3 times because the first two broke out of the box they were packed in. (Someone in the USPS has a couple nice draw bars.) Fortunately the 3rd effort was much better packed in a reinforced box and was successfully delivered. E-Trailer customer service was exemplary in resolving the shipment issue & I will definitely shop with them again.
A nice solid constructed hitch. It should handle everything I hook up to
# 5
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
I tried twice to get this hitch and ball from [online vendor]. Twice the shipment was lost and I had to get a refund. Shipment from etrailer is right the first time and arrived quickly. Plus, since the ball is already torqued on the ball mount, I don't need to by a large socket.
We’ve already installed it and hitched up the horse trailer. Works great for my needs. Half the weight of the much heavier weight distribution system we had been using (and will continue to use for Interstate travel). Hook up was fast and easy.
# 6
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
# 7
Rapid Hitch Adjustable Aluminum Ball Mount Kit - 2 Zinc Balls - 5-1/2" Drop, 6-1/2" Rise
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards
# 8
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 10,000 lbs
I did my research before ordering. I know exactly what I need and want. My boat trailer tongue weight is 750lbs so I went with the Gen-Y Torsion Flex 2" Hitch - 7.5" Drop/Rise 10k. (Works Best with 400-1,000lbs tongue weight). Also got the BEST price due to their 110% Price Match Guarantee.
It was well packaged shipping was great received it within a week installation was easy weighing only 73 pounds. It does affect the center back up sensors on a 2022 , 3500 long bed ram pick up.
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
After having trouble finding the right drop height and weight rating receiver for my new Ford Expedition Max, I called etrailer and Ashley was awesome in helping me as I needed something quickly. I've just travelled 1200 miles interstate with the "Convert-A-Ball" unit and I'm thrilled with it. The mount cushions the movement and had zero jolts or tugging with the trailer. Great product so far and at this stage I wouldn't use anything else!
Perfect for lifted trucks. This is the best hitch I have used to date. It has the perfect angle and design. When I come to a stop and then go, it does not slam metal to metal. There is some unique design that has a internal bumper inside of it. I tow a 7,000 lb ocean boat with this. It's paired to a 12,000 lb 2" ball, which I highly recommend. Several years I have used this without any issues. The paint is still holding up to the salt water that it is exposed to. HIGHLY RECOMMEND!!! etrailer.com has the best customer service and prices you can find. BTW, I bought my brother the same hitch for his birthday and he loves it too. Thank you Lindy at etrailer.com for helping me order the hitches.
# 10
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 4" Drop or Rise
Very nice and as expected from E-trailer. Thank you!!!
Great fit and finish looking forward to the first tow with it.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
After having trouble finding the right drop height and weight rating receiver for my new Ford Expedition Max, I called etrailer and Ashley was awesome in helping me as I needed something quickly. I've just travelled 1200 miles interstate with the "Convert-A-Ball" unit and I'm thrilled with it. The mount cushions the movement and had zero jolts or tugging with the trailer. Great product so far and at this stage I wouldn't use anything else!
Perfect for lifted trucks. This is the best hitch I have used to date. It has the perfect angle and design. When I come to a stop and then go, it does not slam metal to metal. There is some unique design that has a internal bumper inside of it. I tow a 7,000 lb ocean boat with this. It's paired to a 12,000 lb 2" ball, which I highly recommend. Several years I have used this without any issues. The paint is still holding up to the salt water that it is exposed to. HIGHLY RECOMMEND!!! etrailer.com has the best customer service and prices you can find. BTW, I bought my brother the same hitch for his birthday and he loves it too. Thank you Lindy at etrailer.com for helping me order the hitches.
# 12
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Awesome hitch, I use it on a 2003 Ford F-350 and 2005 Ford Expedition, so much nicer just carrying one hitch for any trailer I tow compared to having all different hitches to deal with and lug around
B&W just makes a great product no matter what it is. This is no different. I have two other tow and stow and love the ease of changing heights and ball configurations.
# 13
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs
This is one solid hitch. Bought the hitch to pull about 5000 lbs. there's no doubt in my mind that it can handle it.
Ordering was extremely easy and etrailer representative very helpful. Chedi also sent me videos that explained perfectly how to install. I don't usually leave reviews, but these guys deserve a good one. Customer service and products delivered were impressive.
# 14
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Chrome
B&W just makes a great product no matter what it is. This is no different. I have two other tow and stow and love the ease of changing heights and ball configurations.
Awesome hitch, I use it on a 2003 Ford F-350 and 2005 Ford Expedition, so much nicer just carrying one hitch for any trailer I tow compared to having all different hitches to deal with and lug around
# 15
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 16
Draw-Tite Ball Mount for 2" Hitch - 5" Rise, 6" Drop - 9-1/2" Long - 12,000 lbs
I bought a new truck with twice the towing capacity of my SUV. I needed a 6" drop instead of my original 3" drop, so I bought one with a 12,000 capacity. Very nice.
I got this to Flat Tow my Jeep in the near future. I needed the 5" rise and now the tow bar is almost parallel to the ground. Although the etrailer.com site said this was an economy unit, I am very impressed with the look and feel of the unit. It handles up to 12,000lbs! Nothing economy about it except the very fair price!!! The pictures and video, along with the measurements helped ensure the fit would be perfect and it is! I got a 1" rise ball good for 6000lbs to make the tow bar perfectly parallel. Thanks etrailer I will always shop etrailer first when looking for this type of equipment.
# 17
Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 3-1/2" Drop
Very nice and as expected from E-trailer. Thank you!!!
This hitch is extremely well made and makes it very easy to go from towing a lightweight storage trailer with my SUV and heavy towing with my 3/4 ton pickup. Switching ball sizes is a breeze. I highly recommend this hitch
# 18
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls - 5-1/2" Drop
The hitch was received quite quickly and is even nicer than the picture shows it to be. I pull different trailers and it was always a hassle to have the correct hitch. I also like that they did a follow up call when I requested the item be shipped to an address other than my billing address. We are all concerned about credit card fraud. I will definitely order from them again!
I ordered my AM3405 and was amazed how quickly the etrailer team responded with not only my order confirmation but the fantastic follow up when it was shipped and delivered. I highly recommend etrailer and will order from them again. The product showed up in great shape and I am very happy with the quality. One recommendation would be to order two of the locking pins. One for the receiver and one to lock the ball mount to the unit. You will see by my picture I resolved that issue with a pad lock but the locking pin would have been better.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"