Most Popular Double Eye Springs for 2005 Jeep TJ

The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.

Click to Enlarge

Click to Enlarge

Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great conversion kit, easy to get the plates lined up perfectly. I welded the new saddles onto the axle and welded the nuts to the bolts so there is zero chance of anything moving. Having the plates held in perfect position while welding made it simple. Solved the "dragging wheels problem" without having to cut off and reweld the fenders (which had been welded without enough clearance to the tires at the factory.)

Click to Enlarge

Nice upgrade kit to replace worn parts on a 3 horse tandem axle trailer. Having the beefier shackle straps, bronze bushings, and ability to grease the moving points is a beautiful thing.

During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road

Click to Enlarge

Excellent, had everything I needed and more for my trailer. Everything fit well!

Click to Enlarge

Click to Enlarge

This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!

I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.

Click to Enlarge

Click to Enlarge

After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Made a nice little trailer to haul wife’s golf cart!

Click to Enlarge

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

Click to Enlarge

Click to Enlarge

These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!

Megan was very helpful with helping get this order together and communicating with parts being shipped from other locations. Thank you so very much Megan!!!!

Trailer is back to new again.

Brandon was very knowledgeable about what I would need to replace my axles and springs, right down to the sizes for bushings and bolts. I have been using trailer for many years because their service is awesome.

Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement

Click to Enlarge

Click to Enlarge

Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!

Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.

Click to Enlarge

I think etrailer is Great. I think their customer service is fantastic. My wife and I were in Arkansas, 1200 miles from our home in Ft. Myers Florida. I replaced the original springs on our trailer with new heavy duty springs, but never changed the hangers or bolts. Our trailer was riding very poorly, we needed new hangers and bolts badly because we were headed on a very long 9000-mile trip with many stops all the way to the Monterey CA. etrailer found us a UPS Store along our route to send us the parts that we needed. Many thanks to etrailer for great parts and Fantastic customer service and for helping us with our most Wonderful Adventure!

Click to Enlarge

Product was as advertised and work perfectly. I like your company and have purchased many items from you. The shipping was very good and arrived shortly after the purchase.

Shipped fast looks good will be putting it on my trailer this weekend.

I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.

Click to Enlarge

Click to Enlarge

Click to Enlarge

My order was supposed to arrive on Saturday by Monday evening I had not received it I called the lady was very apologetic and said she would research it. She took care of everything and it was here. They were very helpful .!! the part was exactly what I needed Would definitely recommend them for their personnel and their follow up

Just what i needed since my original equalizers were completely worn out .

Click to Enlarge

Click to Enlarge

Click to Enlarge

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

Click to Enlarge

Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!

Click to Enlarge

We have had great experience with eTrailer, These parts came in as described.

These are working great.

Fit perfectly on trailer and came with bushings installed. Wasn't expecting that

Perfect fit, welded to frame of fifth wheel trailer without any issues and has made the trip to Tucson and back home about 3500 miles without breaking. So far so good

Click to Enlarge

Click to Enlarge

Product was received expeditiously. Product is as advertised. Thank you.

Click to Enlarge