# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Product seems rugged and durable.
Ordered online the package arrived early. Installation for the hitch was simple if you are familliar with typical auto work. Pnumatic tools reccomended. Plug - n- Harness.----well it works....I had to dissasemble the whole rear cargo area of the Xterra to get to the connectors. The instructions from the manufacturer are terrible. Definately needs a picture with each step. This should not be attempted by a novice.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Pretty standard 2" Ball Hitch. Arrived on time and fits as expected.
Could not ask for a better product at a fantastic price. Thanks for everything.
# 3
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I have 10' xterra and I ordered this so could tow my pop up and use a bike rack. it showed up looking just like the picture. I have a Yakima 4 bike rack and it fit fine. But the catch is I had to hook up the camper and the put the rack on. Then take the bike rack off to unhook the camper. It's trivial but it takes time. Also with your bike rack loaded with bikes watch your turns so your bikes don't hit stuff like your propane tank. Remove bike tires if necessary. Overall it's a sturdy hitch and I have no big complaints.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 4
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Exactly what I needed. The recommendations for ball height, between my Coleman camper and my Nissan XTerra were right on. Fits perfectly in the receiver on my vehicle.No issues at all.
solid, heavy, well-made
# 5
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 6
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 7
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 8
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Awesome product. Awesome service. Quick delivery. Couldn't be better!
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 9
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 10
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 11
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 12
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Love my hitch! Gets me and my gear where I wanna go! Dylan really helped me get the perfect equipment for my 2012 Xterra. I am not super car smart but etrailer always gives me expert assistance.
I never write these things, but my experience was etrailer.com was good enough to merit one, notably the care I got from Rose G. I bought two of the above item, as well as the tow package they belong to. Everything is great, and I'd shop here again. - C.
# 13
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.
Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!
# 14
Buyers Products Ball Mount w/ 2" Ball - 3/4" Rise, 2" Drop - 8-1/2" Long - 5K
The hitch was delivered as ordered. The 2" ball was torqued on and it is a perfect fit to the receiver. Solid and high quality. etrailer.com has continued to be a great online retailer for me.
Paul/ you were a great help. Told me everything I needed to know. It works fine each time I use it. Thank you, Scott
What our customers are saying:
"Nice shopping experience. Good selection and prompt shipment. After I see the products in person, I am sure that I will be back for more. Best, Jim"