Best 2003 Ford F-250 and F-350 Super Duty Gooseneck Couplers

I ordered this gooseneck coupler and it arrived in 3 days as promised. It's heavy so I took it to a friend to install it. Took maybe 15 min and I can actually turn my truck and trailer without worrys about blowing out the window like I did the week before. So happy I found these guys, super easy to work with. I would recommend this product to everyone with a short bed truck.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The extended coupler does EXACTLY what I needed - gave me extra turning room for my 8' wide horse trailer. (I've already knocked the back window out once - but no more)!! Gives me peace of mind that I can travel and camp without a turning restriction.

Click to Enlarge

Easy ordering. Informed as order was shipping. Received product quickly and as described.

Great solid product

OK. Just installed the convert- A - Ball Multi -Cushioned Coupler this morrin. Took about 15 min. Took it for a test drive down the I10 just a mile from my front door. [ Casa Grande AZ.] It reduced the felt bumps and road jars by about 80%. I drove down the access road for a few miles. [ uneven, repaired spots, really ruff road.] Then got on the I 10 and drove between The Pinal exit and the McCartney exit. # lane just repaved about a year ago. Did not feel any road vibration that you get at 70 MPH. Other coulper go for 2 to 3 times this much. And require a lot of up keep. I would recommend this to anyone hauling horses,or any big trailer that whats a smoother ride.

Click to Enlarge

Click to Enlarge

Great coupler, just what I needed.

got it in 2 days. as ordered.

Hitch arrived on time Easy to install,cut old one off , fit good,works great. If I need another one this is what I will use, & etrailer is where I will order from.

Not impressed with boxes that they were shipped in,holes and breaking up. The shipper must have been hard on them

The weld quality on this gooseneck coupler is horrible! Our fab shop will have to repair almost every weld on the coupler. For something that is supposed to be rated for 30K pounds I'd expect a certified welder to weld the coupler. But this is not the case because the undercut and lack of fusion on this coupler would not be present if a certified welder welded this coupler. Also, it came as bare metal not painted as shown in the picture. We are NOT satisfied at all with this product!

Good strong hitch at a great price and shipping was fast.

Click to Enlarge

ups delivered the Bulldog gooseneck inner coupler today to replace the worn out coupler on the flatbed trailer. Within a short time the coupler was installed. It fit perfectly. Etrailer has great customer service. Our friends at Ups delivered the coupler quickly. Larryi

Some of the welds looked a little rough and there was quite a bit of spatter on the tube, but with that said, there's no way you'll find a better value for the money. Since I had to weld the hitch on anyways, I cleaned the spatter off with a flap wheel and went over the welds I wasn't happy with. I wouldn't hesitate to purchase another one.

the picture on the internet for this item shows 2 jam bolts before you hit purchase. then after you hit purchase it shows a single bolt. im not sure what we received yet. but its confusing. other than that great service.

I haven’t installed it yet but it looks of very good quality. The shipping was expensive but that’s just how things are now days. I am looking forward to making a new tongue hitch for my 5th wheel camper to convert it to gooseneck. This will work perfectly. Thanks

I recieved your new gooseneck piece for the repair on my trailer I bought that was built from scratch of an old man that passed away I bought from his window and have not yet had the opportunity to replace the old piece that would not interact with most other gooseneck applications because the pipe was not large enough to fit other applications out there so decided to change it to be compatible with other trailers

Receive my product replacement gooseneck lockdown system built heavy duty simple to install and the locking system is monster us I think it will very much suit my needs easy to unlock and lock I would definitely be proud to endorse a product like this and you can’t beat the price everyone I looked at that was like this [was almost double the price] or better shipping was great and quick thank you

Click to Enlarge

Haven’t installed the coupler yet, have to clean up a couple welds that went too far into the area where the ball goes then paint. Test fit into existing tube on trailer showed it was a little loose, not a big deal as it is tighter in the tube it came with. Overall happy with the hitch and price point.

direct replacement for the old damaged coupler. works great!

Great heavy duty replacement! Shipped immediately and received within three days of my ordering.

Perfect fit in the old receiver tube and the lower profile will allow me to level the trailer.

All the reviews said this is good for higher vehicles, to level a load. The distance from bottom hole to gooseneck is 10.5 inches, exact same hight of the coupler that came standard on my trailer. The raw finish comes with a nice coat of rust on it, so be prepared to clean all that up as well.

It's a great starting point for my extreme goosenecks I weld the reinforcement ring top and bottom and reinforce the latch mechanism which makes them just about indestructible . This is the six one that I've installed they get horribly mistreated and are all working fine

I have not installed it yet but it appears to be well made but a little cleaning of the weld would have been appreciated

the service was great ,had one item that was going to be a couple months later shipping and the folks at etrailer called to make sure that was fine but they ended up finding, another item that would work and had my order to me by the end of the week ,great service team at etrailer will definitely use them again

Love this hitch! Holds well and looks great! They were so much help with finding us the perfect hitch and shipped it out quickly.

everyone was very nice and helpful. well made piece. thanks walter

Once I submitted my order- I received a email within hours stating "My order has been shipped "!! This is un-heard of! I received the order in 2 days - Free Shipping!! Customer Service is Top Level. I am a repeat Customer and have been 100% Satisfied with each order- Always packaged Well and Products are as represented in add - Buy with Confidence. Special Thanks to George J and Carol C and all the Staff at etrailer.com

Nice coupler but DO NOT USE this coupler in a recessed ball hitch on a flat bed! The handle did not clear the sides of hole and the first turn i made snapped her off.

This fit the bill perfectly / exactly what I needed Great people to work with and they speak real "English" ! something that you dont find anymore The freight was very fast Thank you from Northwest Wyoming Don

This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.

Click to Enlarge

Click to Enlarge

The difference is substantial! I won’t say you can’t tell the trailer is back there but the ride comfort is outstanding!!!!

I have used etrailer a few times and am 100% satisfied with products and service. I had the pleasure of dealing with customer service on this order as part of my order was backorder. Communication was awesome throughout the process. Great to do business with.

Nice coupler but DO NOT USE this coupler in a recessed ball hitch on a flat bed! The handle did not clear the sides of hole and the first turn i made snapped her off.

I don't see how I lived without this. We often experienced a "bucking" when crossing bridges or even on certain roads with expansion joints. We were getting bounced around so much I can't imagine how our horses survived. This product has removed that completely. It also provides a slight offset if you have a shortbed. I have an 8' bed, but welcome the extra space between my tailgate and the trailer. Well worth the money! I will never tow a gooseneck trailer again without this.