Bulldog Gooseneck Coupler - Adjustable - Round - 2-5/16" Ball - 25,000 lbs

Video Transcript for Bulldog Gooseneck Trailer Coupler - Coupler with Outer and Inner Tube - BD0289250300 Review

Speaker 1: Today we're going to be taking a look at the Bulldog Gooseneck Trailer Coupler. This is designed to work with two and five sixteenth inch balls, and has a max gross towing weight of 25,000 pounds.The nice thing about this trailer coupler is that it has the oversized handle here at the back, so even if you're wearing large work gloves, you can still get that coupled and uncoupled easily. To do that, so right now it's closed, you pull up and flip it over into that second position up at the top. That's going to be the open position. Drop it down, make sure it secures all the way, and flip it to either side to keep that secure. You can put a little lock through the holes there to keep that secure, so no one can tamper with your trailer.Also, at the bottom, it's going to have that cast locking plate, and that's going to fit tightly around that two and five sixteenth inch ball, which is going to reduce chucking and jarring.

It also has this large plate that's going to self-center the ball, so that even if you miss it by just over an inch, it will still find a pocket there.It does have superior high-strength steel. It is not painted, so that you can get it welded onto your Gooseneck trailer. Once you do get that welded on there, you will need to paint it to prevent rust and corrosion. Bulldog has already taken that into account, so they have all their labels and everything covered with a protective layer so you can just go ahead and paint this all up. Once you're done, you can remove the layer and you'll have all your stickers, with all the ratings and information, ready to go.This is, also, adjustable.

To do that, you pull the clip on one side, pull out the pin. You want to have your securing bolt and nut adjusted out as well, so that you can move that inner and outer tube. This does have eight inches of travel. At the retracted height, which is the position it is in right now, is 29 and a third inches. At it's height, it will be 37 and a third.

Again, that range of adjustment is eight inches. The outer tube diameter is going to be four and a half inches. The inner tube diameter is going to be four inches. The pin diameter is going to be three quarter inches. Again, that max capacity is 25,000 pounds.That's going to do it for a look at the Bulldog Gooseneck Trailer Coupler..