# 1
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 3.5K TW
This seems to be an excellent upgrade to the coupler on my Belmont trailer. Less than 100 miles on it so far but the trailer seems to jerk the truck around less on these fine Pennsylvania roads. It is helpful to have an extra pair of hands when installing. The powder coating made the tube on the coupler a little thicker than the original. I used a wire brush and some spray lithium grease on the inside of the trailer tube and was able to install the new coupler just by working it back and forth with minimal powder coating coming off. My trailer is registered at 9,999 lbs which is why I went with the 3.5k TW option. Haven’t had an opportunity to put a machine on the trailer yet to see if that was wise or not but a load of 18 - 6”x6”x12’ pressure treated beams barely moved the indicator. After my first trip I opted to change it to using the hole closest to the coupler as the trailer had a little too much angle back towards the last axle. Even in the bottom hole I still have 9” of clearance between the top of my tailgate on my Ram 2500 and the trailer.
The difference is substantial! I won’t say you can’t tell the trailer is back there but the ride comfort is outstanding!!!!
# 2
Gen-Y Spartan Shock Absorbing Gooseneck Coupler - 5" Offset - 2-5/16" Ball - 5.5K TW
I don't see how I lived without this. We often experienced a "bucking" when crossing bridges or even on certain roads with expansion joints. We were getting bounced around so much I can't imagine how our horses survived. This product has removed that completely. It also provides a slight offset if you have a shortbed. I have an 8' bed, but welcome the extra space between my tailgate and the trailer. Well worth the money! I will never tow a gooseneck trailer again without this.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."