# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
Very impressed with company keeping constant updates. Product was shipped very quickly. Heavy duty and extremely easy to install, granted I had a friend help and access to a lift. I will definitely be recommending etrailer to my friends.
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Needed to pull a 5x8 trailer with a 22 forester. This ball mount had the perfect rise to brink the hitch ball to 18 & 3/4” at the center of the ball.
Great hitch for a reasonable price. Easy to install and works like it should
# 3
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Needed something to raise the hitch carrier on our subaru forester to clear the tailpipes. This was the ticket. Super fast shipping from etrailer and curt makes a sturdy, well finished product.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 5
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
This ball mount is stout! And it's powder coated! This guy will last longer than the vehicle, or maybe me.
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
# 6
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself.
# 7
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 8
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself.
# 9
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
Slightly longer, so you can open your tailgate with a cargo trailer attached. Trailers with a tongue jack that is forward are problematic for tailgates...
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
i bout this product for my 2010 subaru forester to tow a 16" boat. It works much better than expected! The amount of cushion it provides is stellar! quite the amazing device! i will have one on every trailer that i buy.
Solid build and well designed mechanism for anti vibration!
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."