# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
The hitch was very easy to install, took about 30 min. It fits perfectly to my 2001 Ford Ranger. The tow bar is very sturdy and is very well made! The delivery was fast, I ordered it on a Monday, and it arrived on Friday. I would most DEFINETLY recommend this to anyone who is considering this for a tow bar.
I had a hard time deciding on the amount of drop and the length of the hitch ball. The etrailer website provides sufficient information to allow an educated selection. I found this ball mount to fit easily inside a 2" receiver without too much free play. The hole placement gave just the amount of extension I wanted so that I can walk around the truck without banging my shins yet still have sufficient room to allow the trailer to be hitched easily.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Have not used it yet but looks like it's a very quality product and can't wait to try it out
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
The hitch was very easy to install, took about 30 min. It fits perfectly to my 2001 Ford Ranger. The tow bar is very sturdy and is very well made! The delivery was fast, I ordered it on a Monday, and it arrived on Friday. I would most DEFINETLY recommend this to anyone who is considering this for a tow bar.
I had a hard time deciding on the amount of drop and the length of the hitch ball. The etrailer website provides sufficient information to allow an educated selection. I found this ball mount to fit easily inside a 2" receiver without too much free play. The hole placement gave just the amount of extension I wanted so that I can walk around the truck without banging my shins yet still have sufficient room to allow the trailer to be hitched easily.
# 4
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Hard to find item found We have a home with a large back yard with the access layed out so,that only a single vehicle can make the turn around the corner without a trailer,even utility or boattrailer.I had a front hitch reciever on my Suburban and I wanted a long hitch extender for easier handling..It helped even more with the use of my Polaris Ranger,which is short enough and powerful enough to make it around the corner but its hitch receiver is practically on the real axle and the control of the trailer especially backing it is very poor.Instead of an extremely long trailer tongue this extension helps it too. The extender is perfect,nicely finished and arrived within a few days.I want to mention,that the price was very reasonable even with shipping.
Towing a 20Ft. Ranger Bass Rig with no issues after 1 year. Strong Hitch and Ball.
# 5
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
# 6
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 7
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 8
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
High quality. Welds are top grade unlike a few of the discount drop hitches. It asl gives me the ability to use my backup camera and assist lines. I needed a good 9 inch drop hitch to pull my enclosed trailer with my 2020 Ford Ranger XLT super cab FX off road. I've got my vintage bike in the back and I needed to trust this hitch for long trips. It's perfect.
# 9
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.
Rusted within 30 days. The manufacturer refused to warranty the product. I have continued to use it, but it has required some serious rust mitigation and is a flawed product.
# 10
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Product as described!
# 11
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Great customer service Thanks for shipping out the two missing ball hitches so fast.
I received exactly what I ordered in a timely fashion. It appears to be excellent quality and was a fair price. What more could you ask for?
# 12
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 13
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 14
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Easy ordering, fair pricing, prompt delivery...product arrived in excellent condition, very heavy duty drawbar for use with by 4ft x 8ft medium duty trailer.
Solid quality and workmanship.
# 15
Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
Great product and great service. Etrailer stands behind their products!
The hitch was very easy to install, took about 30 min. It fits perfectly to my 2001 Ford Ranger. The tow bar is very sturdy and is very well made! The delivery was fast, I ordered it on a Monday, and it arrived on Friday. I would most DEFINETLY recommend this to anyone who is considering this for a tow bar.
What our customers are saying:
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"