Most Popular Hitch Extender for 1976 Honda Accord

This 6 inch extension is really heavy duty and fit my receiver perfectly.

Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.

Click to Enlarge

Click to Enlarge

Click to Enlarge

The last piece of the puzzle. Pretty stout construction. Easy to assemble. Just pulled a 7000 gvw trailer behind my af992 camper. Flawless. Dont forget to order the pigtail extension.

Click to Enlarge

Ordered the 28"supertruss to utilize with my recently dealer installed super hitch. The bottom truss extension piece fits way to tight, and requires a mallet to install to the proper depth for the pin. The pin holes and the hitch holes are slightly out of alinement, again requiring a mallet to drive the pin both in and out. The top truss extension fits perfectly, but once you bolt them together the misfiting bottom truss piece makes it impossible to align the assembled truss into the receiver. Overall I'm confident the the product will work as intended, but the torklift manufacturing process could use some significant refinement. I will use as is and hope that with a little wear the tolerances in the bottom truss will loosen up enough to allow installation without complete disassembly and a mallet. I expected more from a Torklift product. the etrailer ordering and delivery process was as usual flawless.

I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.

Click to Enlarge

Click to Enlarge

Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.

Works as advertised. I use it full time. I painted the step surface with Herculon bed liner for a rubberized non slip surface, that works even when covered with frost or mud. Only down side, is that it reduces the tongue weight of the truck hitch by 50%. I typically use it to haul a 2 horse trailer. If it ever gets damaged, I will immediately by a replacement.

Click to Enlarge

Affordable front step (wide platform) to service lifted vechicles and will provide distance between exterior mounted spare tire and hitch rack. Suggestion: design the step to fold up or down for a full time install.

Perfect for my application.

Everything was delivered fast and in perfect condition.

Click to Enlarge

Click to Enlarge

This tow bar extension is a quality built product.. Very helpful backing a trailer.

I have included some photos of the hitch extension. The first two are just on my truck without and with the extension. Without the extension, note the proximity of bike handlebars to the tailgate. In the second photo with the extension, the handlebars are much removed from the tailgate. Note that this is a ¾ ton truck with an insert in the receiver. With the insert in place, the front holes of extension did not align with the receiver. It was short 1/8 to 3/16 inch. If needed, I could solve this issue with a smaller bolt. The next photos are without and with the extension in the receiver of our RV. With the cover on RV the dramatic effect of extension is not so obvious. In the first photo without the extension, the handlebars of bike literally contact the back of RV. In contrast in the second photo, the handlebars are 5 to 6 inches from the back of the RV. Though there are no road trips yet, I am confident that the hitch extension will protect the bike and importantly will protect the back of the RV. I hope that these comments and photos are useful to you. If no, I can try again in spring when we remove cover from the RV.

Click to Enlarge

Click to Enlarge

etrailer.com is FANTASTIC! The Brophy hitch extender worked perfectly on our 2007 Honda Accord creating the clearance needed for a bicycle carrier. Thanks George for getting the order out so fast. You all rawk! Thanks again!

I recently had a hitch installed on my car. Since the cargo carrier that I have was used previously without an adapter, I assumed that I didn't need one. Now trying to locate one was more of an effort than locating a hitch. The local auto parts stores of national brands don't keep them in stock. One store made an inquiry but didn't give me much hope. Now I can make a rode trip in confidence that the carrier will be secure as I head down the interstate.

Click to Enlarge

Click to Enlarge

I use use it to carry s bike rack in the top and tow my Honda Accord from the bottom. Love the way it fits and tightens.

Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.

Click to Enlarge

Structurally strong! Chain and turnbuckles created an extension for my RV extension bumper with storage box. Thought with chains it might need constant re-tightening but has remained tight, after initial trip of 5500mi. Of towing car dolly!

Click to Enlarge

I’ve had the superhitch with 24” extension mounted on my 2013 Ram 2500 for 1 year now and use it frequently to pull my 16 x 7 enclosed trailer with my motorcycle and other gear inside. The hitch and extension give me the towing capacity I need for pulling trailers behind my Lance Truck Camper. I highly recommend the SuperHitch!