What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Videos
for Truck Bed Protection
Help Articles
Expert Answers
Hey Ron, thanks for reaching out! The Putco Classic Chrome Decorative Pillar Posts #P402678FD are for an F-150 so we will get that updated. For your 2024 Ford F-250 Super Duty you'll want to go with the Putco Classic Chrome…
Hi Michael; the Firestone #F2609 you were looking at will fit your 2024 Chevy Silverado 1500 ZR2. There won't be any issues with the Multimatic DSSV. If you were looking for a recommendation I would say Firestone is the best option…
Hey Jeff, the WeatherTech ImpactLiner Custom Truck Bed Mat #WT99KF would get secured to your bed using the TechHold Retention Device (see image attached) which is just a adhesive ball and socket. Basically, one the ball end would get stuck to the…
Although we do not have one that comes with it under a single product number like the #EQ64FR, it is simple enough to put it together. The Equal-i-zer Weight Distribution #EQ37141ET does not include a shank so you can add whichever one you need. We…
Hey Thomas, so B and W does have a fifth wheel hitch that fits the Reese above bed rails you have in the bed of your truck but the Companion that you mentioned does not as it only fits into B and W Turnoverball gooseneck hitches. So instead what…
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…
Hey Jeremy, for trucks that are lifted like yours are the best solution is a WD system that has a longer drop shank with it so that the trailer can be towed level. So the Curt shank part #C17132 that you mentioned would have the needed drop but it…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
We have exactly what you are looking for. The correct replacement head assembly for your Reese Strait-Line Weight Distribution Hitch #RP66130 is the Replacement Head for Reese Weight Distribution System - Trunnion Bar #RP58167. Now this assembly…
The pin box on your 2023 Heartland BigHorn 3970RL is a Lippert 1621. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR will fit the bolt pattern but I'm not 100% sure it is the correct capacity. You need to make…
There are a number of parts needed in order for you to flat tow your 2019 Chevy Silverado 1500, which I will list for you below. In regards to having everything installed, we don't have any affiliations with installers but auto body…