2005 Truck Bed Rail Caps

Hey DC, when you have the etrailer tonneau cover part #e23DR installed on your 2024 GMC Sierra 1500 short bed and have the cover folded all the way up you'd have right at 50 inches of open space.

Hey Ron, thanks for reaching out! The Putco Classic Chrome Decorative Pillar Posts #P402678FD are for an F-150 so we will get that updated. For your 2024 Ford F-250 Super Duty you'll want to go with the Putco Classic Chrome Decorative Pillar…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hi Michael; the Firestone #F2609 you were looking at will fit your 2024 Chevy Silverado 1500 ZR2. There won't be any issues with the Multimatic DSSV. If you were looking for a recommendation I would say Firestone is the best option since they are…

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

Great question, Kevin. The Onboard Scale system on your 2024 Ford F-350 Super Duty works by essentially measuring how low the bed is sitting and it gives an estimated weight based off of that. If you added a suspension enhancement then that would…

Hey Ron, try grabbing some pliers and squeezing the raised tab so that you can lift up and you can then slide the tab over the raised edge that holds it in place.

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

As long as you have the hole to install the 1-1/4" ball for the Curt #17200 on your head it will fit. This portion of the weight distribution hitch head sticks out to the side on the top. The friction control sits up above the spring bars which…

Thank you for providing that picture and measurement. Based on what you have there there is definitely enough room to install a weight distribution hitch. I recommend the Fastway e2 which will require placing the brackets 27-30" back along the…

The trailer hitch that fits your 1976 Chevy K10 short bed stepside, and will not interfere with your spare tire is the Curt Trailer Hitch Receiver #13028. You will need to remove the spare tire initially when you are installing the hitch, but you…