Thanks for reaching out!
To replace the end cap for the Malone AirFlow2 Roof Rack # MPG215 on your 2016 Toyota RAV4 you'll need the kit # MPG1012. This comes with 4 of the end caps which gives you a few extras in case something like this happens again in the future. As of right now Malone doesn't offer the end caps as a double or single version - just this pack of 4.
Attached is a review video for you to check out! view full answer...
Yes, it sounds like you're looking for the Fulton Wheel Wedge Kit for F2 Swing-Up, Wide-Track Jacks part # F500133 which is the part that stops the wheel from rolling, the lock if you will.
Please note, this only works on single wheel models. view full answer...
For your 2009 Toyota RAV4 there isn't a plug and play style of brake controller install harness so you'd have to hardwire one in with the # ETBC7 plus a 4-way kit part # 118412 if you do not have a 4-way already.
Those two parts would be all you need to install the brake controller part # 39523 that you mentioned in your 2009 Toyota RAV4.
I attached an install video for the ETBC7 installed in a Rav4 similar to your 2009 model. view full answer...
The old Thule Spare Me 943 isn't compatible with your new RAV 4, as you've already found out. Luckily enough, the replacement # 753-3532 mounting plate for the latest version of the Spare Me # TH963PRO would be compatible with your 2011 RAV 4 and with your older Spare Me bike rack. The plate is all you'll need to get the rack to fit on your new car.
I've confirmed this with Thule for you. view full answer...
I believe you are referring to the Yakima HoldUp # Y02443. If you need just the HitchLock alone, that is the # Y07235. However, if you need the hitch pin that is compatible with both the HitchLock and the HoldUp itself, that is the # Y8890200. view full answer...
Thanks for reaching out!
The replacement brake pads for your Demco Kar Kaddy SS # DM9713045 can be found as part # DM59VR on our site. This includes parts for both sides of the tow dolly.
If you want to replace the whole assembly then you can do so by picking up 2 of the following:
Hub Assembly - # DM04369
Brake Caliper Assembly - # DM13825-92
10" Brake Rotor - # DM03927-92
Brake Caliper Mount Bracket - # DM13920-92 (if worn out)
To check and see if your brakes are actually activating... view full answer...
Since you do not know the number on the lock cylinder of your Thule Weekender Cargo Box and it is locked you will need to have a locksmith come and unlock the box or very carefully drill the core out.
After that you can replace the cylinders with the Thule One-Key System Lock Cylinders # TH450200. view full answer...
The threaded hitch bolt you will need for your Thule DoubleTrack TH990XT is # TH62RE.
The nuts inside the shank though are not available. Nor is the shank itself. But you could either use the new bolt or a tap and die set to cut new threads in the nuts. view full answer...
I have a solution for you but I contacted the manufacturer regarding this question and they informed that the Replacement U-Bolt for Thule Sidekick Cargo Box # TH02943 will not fit a Thule Canyon XT basket. They also told me that there is not a 4" wide option that is compatible with the Canyon XT. The Canyon XT Baskets like the # TH859XT use a 3-1/2" wide mounting point, so that is as wide of a U-Bolt that you can use. The replacement U-Bolt that is as close to the 4" x 2" you want is the... view full answer...
The rack in your photo is the Yakima Raptor. We do sell a replacement strap for that bike rack. The Replacement Rattler Wheel Straps for Yakima Bike Carriers (QTY 2). part # Y02082, has a tab that slides into the groove underneath the tray of your Yakima Raptor.
I have included a product description link and a demo video of the straps below. view full answer...
The Thule rivet covers you mentioned are compression fit and would typically fit pretty tightly. They usually won't pop out on their own. If one comes out, you can re-install it or replace it with # 14303. A tiny drop of super glue will help the cover stay in place.
If the cap is missing, it can allow a small amount of moisture to enter the box so it's recommended to replace the covers if they go missing. view full answer...
The Replacement Wheel Tray for Thule Big Mouth Roof Mounted Bike Carrier # 853-5423-56 does not include the mounting hardware. You will also want 2 bolts # 915064554, 2 washer plates # 853-0333-02, and 2 of the Replacement 3-wing hand knob # 753-0745 to complete the rear mount to your crossbars.
The front mount will require 2 of the Replacement L-Clamp for Thule Big Mouth Roof Mounted Bike Carrier (discontinued) 853-5551, 2 of the barrel nut # 853-0446, and 2 of the T-bolt (discontinued)... view full answer...
The Curt Trailer Hitch Receiver # C13149 will require four M12-1.25, 35mm long, class 10.9 bolts and four 1/2" conical tooth washers to attach to your 2015 Toyota RAV4. The class 10.9 is used for metric bolt grading and is similar to the grade 8 classification. If you are unable to source all these parts locally you can order a Replacement Hardware Kit # RHK for the receiver. view full answer...
In order to get replacement hardware for your hitch you need the Replacement Hardware Kit for Trailer Hitches # RHK. This will require the hitch item number as well as the manufacturer in order to get the correct parts.
The part number you provided does not correspond with any hitch I have been able to find. However, we do have one hitch for the 2009 Toyota RAV4 that matches the capacities you listed, which is the Curt # C13149. You will still need to confirm if this is the right hitch... view full answer...
The correct end caps for the Thule AeroBlade Edge crossbars depends which mounting style you have. For the flush or fixed point AeroBlade Edge racks use parts # TH1500052334 for the right side and # TH1500052333 for the left.
If your bars connect to raised side rails that run along the sides of the vehicle's roof use parts # TH1500052314 for the right and # TH1500052313 for the left. view full answer...
Thule uses their own "Snug Tite" thread pattern for all the anti-rattle hitch pin holes on their bike racks. While we don't have the replacement lock by itself, we do have a replacement Thule Anti-rattle Hitch Lock # THSTL2 that can be used to replace your current hitch pin. view full answer...
You are correct in that you will need a few more pieces to get your Yakima Raptor rooftop bike rack attached to your roof rack. The Replacement "A" and "B" Lower Jaws for Yakima Raptor Aero Bike Rack # Y8880054 will get you started, but you will also need the Replacement Pad Set # 8880057 and the Replacement Hardware # 8880056 to complete it. view full answer...
We do have the parts available that you are needing for your TST 507 TPMS system.
- Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2
- Replacement Flow Through ST3 O-Ring and Hardware Kit with Screwdriver for TST TPMS Tire Sensors # TST74FR. This replacement kit will only work with the flow through sensors that are in the attached picture. If your current sensors look different there would be a different kit. If you can provide a picture of your current sensors, I would be happy... view full answer...
We do have replacement hardware that may work for you.
If you measure the distance between the holes that are in the bottom of your cargo box, and find that it is 4 inches the Thule QM3 Quick Mount Hardware, part # TH04997 will work for you. It means just loosening the hardware and moving the arm out of the way so you can lift the box off your crossbars. Another alternative is # TH05603. view full answer...
It sounds like the 4-Leaf Slipper Spring w/ Open Eye End # e33SR could be what you are looking for. Over time leaf springs can stretch so this one being 1/4" shorter than your current leaf spring is most likely correct.
This leaf spring is rated for a 4,300 lb axle and comes with 4 leafs. The amount of leafs isn't really important since you are simply looking for the weight capacity to be right at or slightly more than what your axle is rated for.
The only real issue that I see is this... view full answer...
Go To Results