The wiring you will need for your 2011 Mercury Mariner is T-One Harness # 118551, which will give you a 4-way connector. To use that with the 7-way on your tent trailer you would need to use the 4 Pole to 7 Pole Vehicle End Trailer Connector # 30717, which provides connection points for both your vehicle and trailer's plugs. To mount the adapter you may want to use no-drill bracket # C57202 along with Mounting Bracket for 7-Way # 18138.
You can see how to mount this adapter in the video... view full answer...
Yes the Curt hitch part # C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part # C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring. view full answer...
Yes, the etrailer Trailer Hitch Receiver item # e66AR comes with all the necessary hardware to install this hitch to your 2000 Mercury Grand Marquis.
If you need a wiring harness to control your trailer's lights you will want the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a... view full answer...
Safety chains/cables shouldn't actually be attached to the tow bar # C19745 at all. The point is to have an alternative point of security in the event that any connection point of the tow bar fails and you have a loose vehicle on the road.
The Curt Tow Bar with Adjustable-Width Arms # C19745 is a very old-school design that was originally used with metal bumpers and people would just wrap the chains around the bumper and loop it up to the tow vehicle. I recommend finding a point on the... view full answer...
Yes, the Thule Hullavator Pro # TH898 can fit on the Malone Square bar roof rack part # MPG201 you have on your 2006 Mercury Mariner. Thanks for the kind words on our site! view full answer...
You will indeed need a 4-flat with a converter for your 1999 Mercury Grand Marquis, with the correct part being the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236.
Then if you also need a hitch, the correct fit is the Trailer Hitch Receiver # e66AR. view full answer...
Yes, the Curt Trailer Hitch Receiver # C12232 is compatible with your 2001 Mercury Sable station wagon as well as the sedans. This will only fit on models with the single passenger side exit exhaust. If you have a dual exhaust you will not be able to fit this receiver without modification to the exhaust.
The Curt T-Connector Vehicle Wiring Harness # C55343 will give you a plug and play 4-way flat connector. This is what you will need to tow most small trailers or carry a hitch mounted... view full answer...
I was unable to find what kind of clearance and recommended rim size of the 1974 Shasta Camper.
As such, I do not recommend upgrading your current rims to 15". I would suggest sticking with the 13" rims. If you let me know why you are wanting the upgrade, I can help you find what you need. For example, if it's because you want the camper to sit higher, we can perhaps make some improvements to the axle.
If you decide to stay with the 13" rims and tires, you will need to know your tire... view full answer...
Yes the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor # ACDOM135 will work great as a replacement for your older Dometic Duo-Therm Air Conditioner.
This air conditioner requires a minimum frame thickness of 3/4", so since yours is over that, you're good to go.
Additionally, we do also offer this unit in black # ACDOM135B, if you're interested.
Both of these units have a 13,500 Btu cooling capacity, a 500 cubic feet/minute air flow rate, and will plug... view full answer...
I spoke with my contact at the manufacturer to make sure there were no issues with the factory dual exhaust on the 1998 Sable and found that you should have no trouble installing the hitch on your vehicle. You will need to temporarily lower the rear exhaust though. The installation instructions (see link) are clear and easy to follow.
In addition to the hitch, you might also need the following to complete your towing set-up:
Trailer Wiring Harness, # C55343 if you have the wagon and #... view full answer...
The best way to find out if your 2006 Mercury Mariner has a factory tow package is to have the dealership run the VIN number of your vehicle. They will be able to tell you all the installed factory options the vehicle has.
If you are trying to decide if the Hopkins Wiring Harness, part # 40455, will fit your Mariner, there is another way that might help you determine if you have the factory tow package. You can look at the rear of the vehicle for the tow package connector that would be... view full answer...
Backup camera systems are not vehicle-specific so the Rear View Safety Backup Camera System # RVS-5350 is a perfectly good option for your customer's 2008 Mercury Grand Marquis. Review and installation videos for this item are linked for you. This is a hardwired installation. view full answer...
The 4-Pole Hardwire Kit with Converter, part # 119178KIT is the correct trailer wiring harness for your Mercury Villager. The kit also includes quick splices for tapping into the existing wiring and a circuit tester for verifying your connections.
I have linked you to the install instructions, as well as to an install video that you might find helpful. The video shows the part being installed on a different vehicle, but the procedure would be similar for your Villager, especially the procedure... view full answer...
Yes, the Thule Passage 2 Bike Rack, # TH910XT, will fit on your 2008 Mercury Mariner. This bike rack has 6 straps that will attach to the top, side and bottom edges of your rear hatch. I have attached the installation instructions as well as a demonstration video for you to check out.
Since your Ladies Trek bike has a step through frame, I would strongly recommend picking up the Thule Bike Adapter Bar, # TH982XT. This adapter will attach to the handlebar post and seat post on your bike... view full answer...
According to my research your 2003 Mercury Mountaineer AWD V8 cannot be flat towed in its stock state.
Although base plates are still offered to enable use of a tow bar, the neutral switch modification kit required to flat tow this vehicle is no longer available from Ford. You may be able to find more information from your local dealership and/or by consulting with your owners manual.
Based on the available information your 2003 Mountaineer should only be towed by trailer, not by a tow... view full answer...
The Thule Sidekick Cargo Box, # TH78GC, will fit your 2009 Mercury Mountaineer with factory roof rack (side rails and cross bars).
If your Mountaineer just has side rails that run front to back, you will first need to add cross bars using Thule Evo Raised Rail Feet # TH710401, 53" WingBar Evo Crossbars # TH711420, as well as locks # TH450400.
The Sidekick mounts to your vehicles cross bars using U-bolts that come with the box. view full answer...
A 1-1/4 inch to 2 inch hitch adapter is not available for towing, those are for accessories like bike racks only. So if you want to tow with the 2003 Mercury Mountaineer you'd need to add a 2 inch hitch. The good news is there is a hitch designed to fit directly under the OEM hitch so you don't have to remove it, and what you'd need is the following:
- etrailer Trailer Hitch Receiver # e55KR
If you also need a 4-way wiring harness the correct part is the Vehicle Wiring Harness # HM40655. view full answer...
I do have a hitch cover and anti-rattle sleeve option for you, however, the Draw-Tite QSP Trailer Hitch Silencer and Cover part # 63080 will not fit a 2" Curt trailer hitch receiver as the collar on the outside of the hitch receiver is too large.
In order to cover the receiver opening on a 2" Curt trailer hitch receiver like part # 13707 I recommend using the Curt Rubber Tube Cover part # C22272. For anti-rattle purposes I recommend using the Brophy Stabilizer Bracket for 2" Hitch Receiver... view full answer...
The K-Source Universal Towing Mirror # KS3891 is designed to fit almost any OEM mirror that has a gap between the glass and housing as on the mirror in the photo I linked for you. This gap is where the mirror grips the OEM housing. I looked at photos of your 2004 Mountaineer and your stock mirrors will work well with it.
The K-Source mirror installs quickly without tools and the adjustable mirror face lets you get the best view of the trailer and road behind you. This is a single mirror... view full answer...
Yes, the Thule OutWay 2 Bike Carrier, part # TH45JV, will fit your 2002 Mercury Grand Marquis. It can carry 2 bikes with a maximum weight capacity of 66 lbs. Thule does not recommend the use of a 3 bike carrier on your vehicle.
If you are going to be carrying women's, childre's, or alternative frame bikes that do not have the horizontal bar at the top of the frame, you will want to use the Thule Bike Adapter Bar, part # TH982XT. It attaches to the center seat post and to the handlebar... view full answer...
Go To Results