bing tracking image
reset filter

Expert Answers about GMC

  • What 5th Wheel Rails and Brackets Do I Need for a 2024 GMC Sierra 3500?
  • Hey Brian. To install a set of 5th wheel rails on your 2024 GMC Sierra 3500 long bed dually, I recommend the Curt Custom Fifth Wheel Installation Kit item # C16429-204. This kit comes with custom fit brackets that install in pre-existing holes in your Sierra's frame. The included hardware will attach the industry standard 5th wheel rails directly to the custom brackets. The universal rails that come with the item # C16429-204 have a Carbide finish so they're going to be the best option...
    view full answer...
  • Will K-Source Towing Mirrors Interfere With Power-Folding Mirrors on a GMC Sierra
  • Thanks for letting us help Mike. The K-Source Snap & Zap Custom Towing Mirrors # KS80930 will not make contact with your Sierra when the factory mirrors are folded in, and they will not interfere with the power-folding function. I've included a video below showing the # KS80930 installed on a 2024 GMC Sierra. If you skip to around the 1:50 mark, you can see the mirrors being folded while the towing mirrors are installed. What are you planning to tow with your Sierra?
    view full answer...
  • Recommended Disc Brakes for a 2025 Brinkley Z 2670 w/ 7,000 lbs Axles
  • Hey Mark, thanks for the information! It looks like the 2025 Brinkley Z 2670 has stock 17-1/2" wheels with 1/2" lug studs. I recommend the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle Trailers item # DE66AR. The DeeMaxx item # DE66AR comes with everything you need to upgrade your Brinkley to disc brakes. The four hubs come with all the bearings, races, and seals you'll need, along with brake pads. The included lines, fittings, and disc brake actuator will get you all set up and running....
    view full answer...
  • What Pin On My 7-Way Should Be Hot All The Time?
  • Hello Otto. The 12v pin on your 7-way should be hot all the time, assuming it is wired directly to the vehicles battery. This would generally be the 1 o'clock pin. I have included the wiring diagram for a 7-way below for your reference. I am not quite sure what you mean by "tm pin" though so if you can provide more information, I am happy to provide you with a more detailed answer.
    view full answer...
  • Easy To Mount And Remove Tire Chains For 305/70R18 Tires On A 2026 GMC Sierra 2500 AT4X
  • Hi William! I believe what you are looking for is the Konig Tire Chains - Diamond Pattern - Square Link - Assisted Tensioning - 1 Pair # KON74FR. These have that cable that goes around the back of the tire to make installing and removing them easier (see included picture), has a built in tensioner (so you will not need another one), and the assisted tensioning design means the chains center themselves and stay snug as you drive. They are on the expensive side, but they are very nice and...
    view full answer...
  • What Brake Controller is Better, Tekonsha Prodigy P2 or Pro Series Pilot for 2019 GMC Terrain?
  • Hello Patrick, Between the 2 brake controllers that you mentioned I would go with the the Tekonsha Prodigy P2 # 90885. The main reason is because the Pro Series Pilot # 80550 is time delayed, so there will be a delay from the time that you hit your brakes in your GMC for the brakes to be applied on the trailer. Honestly, I am surprised that they still make the time delayed brake controllers. The Tekonsha P2 # 90885 is a proportional brake control, meaning that it works at the same time...
    view full answer...
  • Looking For Teflon Ball Hitch With 2-5/16" Ball
  • Hello Randy, thanks for reaching out. We do have the Andersen Rapid Hitch Greaseless AlumiBall Combo # AN46VR that comes with a greaseless 2" and 2-5/16" ball. This would be the closest thing we offer to a Teflon ball.
    view full answer...
  • Where Does the Voyager PWM Filter for RV Camera Systems part # VGR74VR Install?
  • Hi Kirk, The Voyager PWM Filter for Voyager RV Camera System part # VGR74VR doesn't install into your vehicle or RV's 7-way. This connector needs to be installed between the factory Voyager camera wiring and the camera itself. You can do this by removing the mounting plate or camera from the rear of the RV and unplugging the factory CEC connector. Once you've done that you plug the VGR74VR into the factory CEC connector and plug the camera into the other end of the VGR74VR, then reinstall...
    view full answer...
  • Availability of 2" Ball for Weigh Safe True Tow
  • Hey Edgardo! The Weigh Safe True Tow Weight Distribution Hitch # WS59MR comes with a 2-5/16" ball by default. Although there isn't a version with the 2" ball, you can swap it out using the Replacement 2" Hitch Ball for Weigh Safe Ball Mounts # WS96KR. Just be aware that the ball will be the limiting factor of the hitch since it is rated for 10,000 lbs. The True Tow is a great choice and will serve you well with the built-in scale and simple adjustment. This allows you to set it perfectly...
    view full answer...
  • Does Yakima OverHaul Adjustable Ladder Rack Y01151-5855 Come with 68 inch Crossbars
  • Hey Mike, yes the Yakima Overhaul HD Adjustable Ladder Rack part # Y01151-5855 that you referenced does come with 68 inch long crossbars. They are included and you would not need to purchase them separately. The part number for just the tonneau cover adapter that comes with this is # Y01155. Are you wanting to order a version of this ladder rack without the adapters currently?
    view full answer...
  • Dash Mounted Brake Controller For 2004 GMC Sierra 2500HD
  • Hey Rob, thanks for reaching out. Yes, we do have dash-mounted brake controller options for your 2004 GMC Sierra 2500HD. If you want a standard controller that mounts on the dash, I recommend the following: - Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional # C86SV This is a fully proportional controller, so you get smooth trailer braking that is perfectly synced with the vehicle's brakes. The controller mounts on the dash and installs using the...
    view full answer...
  • Recommended Bolt On 7,000 lbs Capacity Square Jack
  • Welcome back Jordan! I have an alternative for you but we do not have any Ram 7k jacks that can be bolted on. Just welded like item # TJD-7000S and pipe mount like item # TJDP-7000S-B options. For a 7,000 lbs capacity square jack that can be bolted on, I recommend the Patriot Hitches Square Trailer Jack item # PH66NR. This is a sidewind jack with a total lift ability of 28". It comes with a mounting bracket and hardware to secure the jack to the trailer's frame. The bracket included...
    view full answer...
  • DeeZee Truck Bed Tool Box Compatibility With A 2014 Chevy Silverado 2500 With A 6.5' Bed
  • Hi Kim, Yes, the DeeZee Blue Label Truck Bed Tool Box # DZ9170 is a confirmed fit for your 2014 Chevy Silverado 2500 with a 6.5' bed. The J-bolt mounting hardware is included as well. I recommend checking out the video attached below to help walk you through the installation process.
    view full answer...
  • Weight Capacity of Mounting Plate With etrailer Swivel Jack
  • Hi Tyler; the mounting plate included with the # e22ZV has a 3,500 lb capacity. This exceeds the 3,000 lb lift capacity of the jack so you won't have to worry about overloading it.
    view full answer...
  • Is The Andersen Rapid Hitch 2-Ball Mount AN93VR Compatible With GMC Multipurpose Tailgate?
  • Hey Virgil, thanks for reaching out. The Andersen Rapid Hitch Greaseless 2-Ball Mount # AN93VR is not specifically designed to work with the GMC multipurpose tailgate. It will work on a GMC truck, or any truck with a 2-1/2" receiver but you would not be able to fully deploy the fold-down portion tailgate. That said, we do offer a ball mount that is designed to be compatible with the GMC tailgate. Take a look at the following: - B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro...
    view full answer...
  • Thread Pitch Of The Replacement Front Turnbuckle for HappiJac Qwik-Load Turnbuckle Set # LC182897
  • Hey James, The thread pitch of the hook included with the Replacement Front Turnbuckle for HappiJac Qwik-Load Turnbuckle Set # LC182897 is 1/2" x 20 coarse.
    view full answer...
  • What Hardware Is Included With The Caliber Snowmobile Grips Kit CA46TJ?
  • Hey Ed, thanks for reaching out. The Caliber Snowmobile Grips Kit # CA46TJ comes with 75 truss head stainless steel screws. It will be enough to install all 6 of the 15" grips. All you will need is a drill and a tape measure.
    view full answer...
  • Is There an Air Bag Helper Spring For a 2024 GMC Sierra 1500 Denali with Adaptive Ride Control?
  • Great news Rick. The Firestone Ride-Rite Air Helper Springs # F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command # F56VV so you will be able to easily adjust the air pressure in the bags from either the included wireless remote or from your smart phone using the Ride-Rite app.
    view full answer...
  • Recommended Gen 3 Goosebox for a Lippert 1621 Pin Box
  • No, not at all! You will be all good with the extra capacity. Since you have a Lippert 1621 pin box and you're looking to get a Gen 3 goosebox you will want the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter item # RP85FR. You will also need the Reese Safety Chain Kit with Clevis Hooks item # RP49151. These are not included with the goose box but are legally required.
    view full answer...
  • Recommended Gen-Y Gooseneck Pin Box
  • Hey Danny I would be happy to help you! Unless your 2015 Sandstorm 5th wheel trailer has a Lippert Rhino Pin Box which says Rhino Box on the side I am going to need to see the sticker on your pin box. It'll have some of the following or all; a serial number, RPO number, LCI number and some other information on capacity. If you could email me this directly I would be happy to find the right Gen-Y Gooseneck Pin Box for you. Now, if you have a Rhino Box you'll need the Gen-Y Hitch 5th Wheel...
    view full answer...