Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt # C25FV (13568) and # C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case where Curt offers two different hitches for the same make and model of vehicle. They both have the same weight capacity so the only real difference is now then install. The # C74MJ uses just four bolts that thread into existing weldnuts on the... view full answer...
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to 3,500 lbs in GTW and up to 525 lbs in TW. Class III, on the other hand, have a 2 inch receiver and have up to 8,000 lbs GTW and 800 lbs TW. I will attach a help article that goes in to more detail for you.
A good example of a Class II hitch that... view full answer...
- SEE SOLUTION UPDATE WITH PART # C32FV IN COMMENT SECTION BELOW -
I have a brake controller recommendation but at this time it doesn't look like we (or our manufacturers) have any information or at least an adapter harness to fit with the wiring you have under the dashboard on your 2023 Mazda CX-50.
I recommend checking out the Redarc Tow-Pro Elite # RED44FR for your application because the only part of the controller that will be visible is the small control knob - this not only gives... view full answer...
Hey Jim, thanks for reaching out!
I recommend going with the Kuat Class 4 V2 Kayak Roof Rack which comes in Gray # KU33VR as well as Black # KU53VR.
This kayak carrier system looks really sleek when folded in the "stored" position, but it's also the only J-Style cradle that comes with T-Slot mounting hardware like what you're wanting to use.
Attached is a review video for your reference. view full answer...
Hi Cameron!
For your 2025 Mazda 3 Sedan, I prefer the Curt # C44DR over the Draw-Tite # 24982. They are almost identical and have the same weight capacities, but Curt is made in America and Draw-Tite is not. This pretty much always pushed me to the Curt hitches. Plus I have just found them to be nicer.
When we installed the Curt on a 25 Mazda 3 Sedan, we found the hitch height to be 12" (measured from the ground to the inside top of the receiver opening). We haven't had the chance to... view full answer...
Hello Rob, thanks for getting in touch. The hitches we offer for the 2025 Mazda CX-50 non-hybrid will NOT fit the hybrid model. For example, the Curt Class 3 Hitch # C38BR will fit all models of the 2025 CX-50 excluding the hybrid model. I was able to verify this with the manufacturer. There is no hitch for the hybrid model at this time. view full answer...
Hello David. The Go Power Solar AE-4 All Electric System with MPPT Solar Controller # 342-75010 is a full solar kit. So you can use it, and you will be replacing your current solar setup with the new controller, panels, remote ect...
This kit can work with up to 6 panels so you can use your current 2 as well as the 4 that come with the kit, provided there is room on your roof. If you already have the cables for your current panels, there is nothing else you need to buy separately.
The... view full answer...
While we have not had a 2024 Mazda CX-90 PHEV in our shop with the hands free liftgate to test the exact function I can say most applications will not eliminate the use of the kick sensor. I installed our receiver on my Acura RDX which takes up a lot more of the space under the bumper with its visible cross tube and I can still use the kick sensor on mine to operate the hands free liftgate. You will likely find that you need to perform the kick motion on either side of the receiver tube... view full answer...
Hello Nance,
I do still recommend going with the Brake Buddy Classic 3 Portable Flat Tow Brake System - Preset # HM39494, since a braking system is actually required by law in all states. If you’re flat towing without one and happen to get pulled over, there’s a good chance the officer will say something like, “Which one do you want us to tow, the motorhome or the car?” That’s not just a theory, it actually happened to one of our customers!
I’ve also attached a helpful article that goes... view full answer...
Fully extended the Lockrack Adjustable Stand-Up Paddle Board Carrier # LR47FR can handle up to a 40.5" wide paddle board, so it'll fit. view full answer...
Hey Michael, so to install a 7-way on your 2019 Mazda CXC-5 you'd need to first start with a 4-way kit like the Tekonsha part # 118746 which is custom fit and very reliable. This covers the taillight functions of the trailers and is ready to be used with a 7-way adapter like the # 37185.
If the trailer has brakes that need to be operated as well you'd instead need the 7-way adapter part # ETBC7 and a brake controller like the P3 part # 90195 instead of the 37185. The ETBC7 comes with the... view full answer...
Hey Cheryl, congrats on the new car. The wheel trays are a bit different on the Saris SuperClamp Bike Rack for 2 Bikes item # SAR84YR. If you have a 29" tire they're 3" wide but if you have a 27-1/2" or smaller tire they're 4-1/2" wide. This bike rack accommodates bikes weighing up to 60 lbs a piece and wheelbases that are 28" to 52" wide.
The Saris SuperClamp item # SAR84YR will not stick out past the sides of your CX-5 when folded up. I have attached a picture below of this bike rack... view full answer...
Hello Paul, thanks for reaching out. The etrailer Class 3 Hitch # e98902 has a standard 5/8" hitch pin hole. Any hitch pin for a 2" hitch should be this same 5/8" diameter.
That diameter is very common. A hitch pin such as part # e98881 is what I recommend to go with the # e98902 hitch.
What hitch pin did you buy? Was it not a 5/8" diameter pin? view full answer...
Hey Robert,
With the Rapid Podium feet being phased out and replaced with the Evo Clamp feet there unfortunately isn't a fit kit for your current feet and you'd need to switch over to the newer model. For a 2019-2024 Mazda 3 5-door you would need the Thule WingBar Evo Roof Rack for Fixed Mounting Points # TH75YG. This includes the following components:
Evo Fixpoint Feet for Thule Evo Crossbars - Qty 4 # TH49SC
Fit Kit for Thule Evo Fixpoint and Edge Fixpoint Roof Rack Feet - 7143 # TH84CE
Thule... view full answer...
Hi Erin,
We unfortunately do not have an installation video for the # ETBC7 kit in a Mazda CX-5 but the process is going to be the same for each car. I typically start by mounting the # ETBC7 to the trailer hitch crosstube with a no-drill mounting bracket. With your crosstube being hidden behind the fascia you'll want the long bracket # 18136 and need to face it down. You can either have the 7-way face down or you can stick it in a vice and bend the 7-way side of the bracket up so that... view full answer...
Hey AM!
The Curt Trailer Hitch Receiver # C33MJ has a tongue weight rating of 525 lbs so the hitch itself can handle quite a bit. When I looked up the owner's manual for your 2025 Mazda CX-50 Hybrid it looked like they have the max tongue weight rating listed to be 10% of the trailer tow rating, so I recommend checking out your copy of the manual to make sure you know what the lower limit is (the hitch, or your CX-50).
The Thule Epos Bike Rack # TH99XE is an excellent choice for your... view full answer...
Hello Andrew,
Great question. When installing the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76138 the extra fascia piece does NOT get reinstalled. I attached an image of the piece I believe you are referring to, if it is a different piece please let me know.
What do you plan on using the hitch for? view full answer...
Hello Greg,
I believe by "paddle style" you were referring to the saddle-style kayak carriers, which are flat like you described. While Thule no longer has felt carriers, there is a manufacturer that does, which is Rhino Rack. So you can still use the style you want, you'd just need the Rhino-Rack Nautic Kayak Carrier # RR571. view full answer...
Hey Larry, for your 2022 Mazda CX-5 I would recommend the etrailer hitch part # e98902 as it's mostly hidden with only the hitch opening hanging below the rear bumper and also it has great towing capacities. Will you be towing a trailer or is this for like a bike rack? view full answer...
Go To Results