If the backup camera is mounted anywhere on the spare tire or spare tire carrier of your 2011 Toyota FJ Cruiser the Thule Spare Me, # TH963PRO, will not fit. Otherwise it is listed as a fit.
If your FJ Cruiser does have a back up camera that is mounted right in the center of the spare then I recommend using Hollywood Racks spare tire mount bike rack # HRSR1 instead. But you will have to remove the plastic cover from the spare tire for it to fit. I have linked video reviews of both racks... view full answer...
The Karrier ST205/75R15 Radial Trailer Tire, # AM10244, will fit on a 15x5.5 inch wheel. It has a maximum load rating of 1,820 lbs. at 50 psi and an overall diameter of 27.3 inches. The overall width is 8.1 inches.
I would not recommend installing the Karrier ST225/75R15 Radial Trailer Tire, # AM10256, on a rim width of 5.5 inches. The minimum rim width for that size tire is 6 inches. If you try to squeeze that size tire on a narrower wheel than what is recommended, it will cause the tread... view full answer...
You will need a crossbar adapter since the Roadmaster XL base plates are are a crossbar style, but yes, the Nighthawk and XL base plates are 100 percent compatible, and this set up will definitely work on your 2008 Toyota FJ Cruiser. Exactly what you need is the following:
- Roadmaster Crossbar-Style Base Plate Kit # 1183-1
- Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
- Quick Disconnect Crossbar Assembly # 910021-00
This is a really nice choice because the Nighthawk... view full answer...
The Yakima Single Speed # Y02481 will work great for your L Trek Farley fat bike.
This bike rack allows up to 5" wide tires and up to 29" tall wheels, so you will not have to worry about fitment issues.
The Yakima Single Speed comes with very long wheel straps in order to wrap around very wide tires on fat bikes.
I have attached a demonstration video for this bike rack. view full answer...
If your trailer has 3,500 lb Lippert axles installed on it the Lippert lift kit part # LC270682 would work to give you the 3-1/2 inch lift you are wanting but if you have a different axle capacity/brand you'd have to let me know so I could see what you may need. I tried to see if I could find that info online and was not able to. view full answer...
To find out if the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar RTL002 will fit beyond the spare tire on your 2010 Toyota FJ Cruiser, there is a simple measurement you can take.
Holding a straight edge (like a yardstick) against the back of your spare tire, measure from the center of your hitch pin hole to the straight edge (see accompanying photo). If it is less than 8-1/2" you can use the T-Load # RTL002. view full answer...
Yes, the Thule T2 Pro XT can work on your 2007 Toyota FJ Cruiser. Unfortunately, you will have to get an additional item for it to work. You will need to add a hitch extender to use this hitch bike rack. I recommend the RockyMounts Hitch Extender w/ Hitch Pin and Lock - 2" Hitches - 8" Long, part # RKY10008. It will adds 8" of length of your trailer hitch receiver. But keep in mind, whenever you add a hitch extender, you reduce the maximum tongue weight and the maximum gross trailer weight... view full answer...
The correct Rhino-Rack Pioneer Platform Rack Kit for your 2013 Toyota FJ Cruiser if it has a bare roof is part # RR25TB for the 84" long x 49" wide platform along with the Rhino-Rack Backbone Mounting System part # RRRFJB1 that you will need to mount the platform on your FJ Cruiser. view full answer...
It is not possible to run 17 inch wheels with the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/Flange - Off-Road Tires - 2.2K # ASR1THDS03.
The largest wheels you can run on a hub that fits the spindles on these Timbrens are 16 inches with the Dexter Trailer Hub and Drum Assembly # 84656UC3-EZ view full answer...
Since your Thule crossbars have the channel underneath, they will be compatible with the Evo Raised Rail Feet # TH710401 that fit your 2007 Toyota FJ Cruiser with the factory roof rack. Thule recommends using 53" square bars # TH712400 so make sure your current bars are 53" otherwise it may not fit since the track underneath has a specific length. If your square bars are a different length then you will need to lay them across your roof and verify that the track underneath meets the side... view full answer...
The Yakima WindShield Fairing, part # Y05017, is designed to fit a variety of roof racks, including factory racks.
The 2012 Toyota FJ Cruiser OEM roof rack definitely has a unique system, but the front bar is all that matters for the WindShield. The front bar looks to be an aero-style bar, so the straps of the WindShield will work just fine. In fact, the installation video of this deflector features a roof rack with aero-style bars, so the installation will be the same. I've linked to... view full answer...
The Thule Evo Raised Rail Feet # TH710401 will work with the Thule ProBar Evo Crossbars # TH713700. The issue you may run into is that the 79" ProBar Evo may overhang more than 8" past the Crossroad Feet. For the Thule Hullavator # TH898 to work, you'll need to have at least 4 inches of overhang past the foot and no more than 8 inches.
IF the 79" ProBar Evos do not give you the 4-8 inches of overhang were looking for, you'll need to get a smaller bar, which is where the next issue comes... view full answer...
There are a number of great options for a 3-bike or 4-bike rack for your 2011 Toyota FJ Cruiser for a 2" trailer hitch like the Draw-Tite Trailer Hitch # 75461, and the best is going be the Swagman Trailhead 3-Bike Rack # S63365 or Swagman Titan 4-Bike Rack # S63410.
These racks are the best because they are lightweight, making them easy to handle, as well as more affordable than other options while not sacrificing on quality.
Additionally, please keep in mind you'll need Bike Frame Adapter... view full answer...
I confirmed with the instructions that, yes, the Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars # RRRVP25 will work with the fixed mounting points on your bare roof of your 2007 FJ Cruiser.
In order to install the legs into the mounting points, you will first need to remove all of the existing hardware that is in your mounting points. I went ahead and attached some images that show this removal process and the fitment of the legs to the mounting points as well. view full answer...
There is not a place for safety chains to connect to the 18" Curt Extender for 2" Receivers # C45796 so you would need to get new safety chains as well; I have added a link to our selection of safety chains for you to check out such as the 60" # C19749.
Keep in mind you will need Pin and Clip # C21510 in order to attach the extender to your current hitch, and that an extender is going to reduce the capacity of your current trailer hitch by 50 percent. view full answer...
The correct Curt T-Connector Vehicle Wiring Harness for a 2008 Toyota FJ Cruiser is part # C55567, there are no other types of trailer wiring harness options for this vehicle such as ones that plug into a single port. I confirmed this with Curt for you. view full answer...
The spare tire cover on your 2012 Toyota FJ Cruiser will need to be removed in order to use the Hollywood Racks SR1 2-Bike Carrier part # HRSR1. The reason for this is because the rack could shift as you go over bumps if it was not attached directly to the tire.
If you have the stock 265/70-17 tires on your FJ Cruiser then there won't be any fit issues with the bike rack. If you have an aftermarket tire size then so long as they do not exceed 15" wide then the bike rack will work just... view full answer...
The Rhino-Rack Backbone Mounting System for Pioneer Platform # RR38QJ would be able to be attached to your 2007 FJ Cruiser, but it only has a 220lb capacity so it wouldn't be able to handle the weight of a rooftop tent. If your FJ Cruiser has a naked roof then the only option for a rooftop tent would be to tow a small trailer with crossbars like the Yakima EasyRider Double Decker Trailer # Y08129. view full answer...
Yes, the Aries bracket kit part # AABRKT-2059 that you referenced is the correct bracket kit for the grille guard part # AA2059 which fits your 2007 Toyota FJ Cruiser. view full answer...
Tekonsha wiring harness # 118245 fits various Toyota and Lexus vehicles but for your 2007 Toyota FJ Cruiser the harness that is recommended is Tekonsha part # 118405. This harness plus in at your taillights and requires only one wire be run up to the engine compartment for connection to the battery + terminal through the included fuse holder. I have linked a video and an installation article to help you see the process.
If you test the 4-prong connector under the bumper of your FJ with... view full answer...
Go To Results