The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 will connect to your gooseneck hitch ball in your truck and allow you to tow a 5th wheel camper which uses a standard pin box. You will need to ensure your gooseneck ball is no more than 5" above your bed floor. view full answer...
The Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K # DM14040-81 has an integrated 5/16 inch pin hole with a 3 inch span for that lockable feature. I recommend using the Trailer Coupler Lock # e98888 which has a 3-3/8 inch span and is 1/4 inch diameter. view full answer...
As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt # C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4, 2023).
I would like to think that they would use a similar plug between the Highlander and Grand Highlander models, but it is too soon to say. We have not seen one come thru our shop yet. As soon as we can get our hands on one, or the folks... view full answer...
Yes, we do have a Blue Ox base plate that will fit your 2024 Chevy Blazer. If your Blazer has the 2.0L Turbo engine you will want the Blue Ox # BLU58CR. For vehicles without the 2.0L turbo it will be the Blue Ox # BX1735. Both will install very similarly. You will have to remove the front bumper and do some minor drilling. view full answer...
If you have a variety of older Yakima products that you want to mount to crossbars that are 2-1/2" wide x 3/4" tall then the Universal MightyMounts # Y03590 would be your best bet. These adapters fit a wide variety of Yakima products but they are somewhat specific. If you can let me know what products you are wanting to mount them on I can see about verifying if these will fit or what other parts you may need. view full answer...
The kit in question is # XLPROLUBE1980KIT. It fits 1.98 inch hubs (the opening where the grease cap fits in the hub) and 3500 pound axles. The seal which will replace the regular grease seal fits 1.72 inch spindles (diameter where the seal rides on the spindle) but will not fit 1.68 inch spindles. view full answer...
The Longview Custom Towing Mirrors, # LO54FR are a confirmed to fit for the 2021 GMC Sierra 1500, all trim level packages. there is no exception listed for the Denali trim package. I understand what your dealership has stated and that is a common issue for these types of snap on aftermarket tow mirrors, not matching up for use to some trim packages. But for this particular part from Longview they addressed those needs with a cutout in the mirror housing for the cameras. Please check... view full answer...
The correct load stops for a TracRac Ladder Rack will be based on which version you have. If you have the Thule branded ladder rack then you will need to use the Thule TracRac Ladder Rack Load Stop part # 8537165 with the Washer part # 951-0820-20 and Hand Knob part # 753-0776-09. We also offer the complete kit for the Thule branded ladder rack, the Replacement Load Stop Kit part # 753-3761.
If you don't know which version you have, just look for the sticker on the base/upright. If you... view full answer...
Roadmaster offers a Dual Hitch Receiver, part # RM-077-4 that has a 10,000 lb towing capacity. However, the Receiver is meant for flat towing a vehicle and carrying a hitch mounted accessory, not for towing a trailer. The top receiver has a 400 lb tongue weight capacity, which means that only 400 lbs of downward force can safely be applied to the Dual Hitch Receiver.
If you're wanting to tow a trailer and carry a hitch mounted accessory at the same time, I'd recommend using the # D210... view full answer...
We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents.
The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively.
The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want... view full answer...
I believe what you need is the # THKEYN009 replacement key. We've gotten questions about a number 600 lock core/key, however, the number 600 was never used for the production of lock cores or keys in the Thule or SportRack roof rack systems.
What we've found is that the number was simply being read upside down and in reality it was number 009, for which # THKEYN009 is the correct replacement.
If you are certain that is not the case then your only other option is to replace the lock cylinder... view full answer...
We have the Dexter Axle Double Lip Seal for Marine Hubs # 168255TB which has the 1.68 inch diameter you need along with the 2.56 inch inside hub diameter you need. view full answer...
We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like # WS1434 and vinyl trim like # CAM25103.
Since trailer makers do not keep track of this type of part your best bet for matching up to your trailer is to simply review the items shown to find what will work on your RV. view full answer...
The maximum hub bore measurement for the 5,200 LB or 6,000 LB Dexter hub and drum assembly # 8-201-5UC3-EZ is 3.622 inches. So a wheel with center bore of 3-3/4 inches would fit. view full answer...
Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate plate cut to the appropriate size to shim out one side of the 2 x 2 trailer tongue so a hinge for a 2 x 3 hinge kit like the # FHDPW230300 weld-on or # FHDPB230101 bolt-on hinge can be used. view full answer...
B&W gooseneck hitch balls such as part # BWGNXA2010 feature a square shank that fits into the square opening of a B&W gooseneck hitch such as # BWGNRK1309. Curt gooseneck balls use a round shank and the two types are not compatible. No adapters are available to allow use of a square peg in a round hole.
If you care to provide the year/make/model/version of your truck I will be happy to see what options we can offer in 5th wheel hitches. view full answer...
We offer trailer wheel center caps in sizes for a 2.84-inch wheel pilot hole, part # AM90113, all the way up to caps for wheels with a 5.15-inch pilot hole, part # AM90078. In about the middle of this range is the part # 319EZ that you referenced, which is the most common size for camper/trailer wheels which have a 3.19-inch pilot hole. We do not have a center cap like these with a 6-1/2-inch outside diameter.
I looked at several online photos of the 2006 Starcraft Centennial 3608 and... view full answer...
Furrion/Lippert love to change the part numbers constantly on their products so it can be a bit tricky to find exactly what you're looking for if you don't know the right places to look. The FWHO9A-AM refers to the unit without the door, which would be part # FR93FR for our website.
If you need the door as well then we have the following sizes:
16" x 16" Door # FR98SR
16" x 18" Door # FR48SR
18" x 18" Door # FR68SR
If you plan on completing the installation yourself you'll also need... view full answer...
We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer.
If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch # C13701 would be an excellent choice, with it's tongue weight capacity of 500 lbs. For frame members between 22-72 inches apart, use the Curt Hitch # 13703, which has a tongue weight capacity of 350 lbs. view full answer...
Go To Results