Yes, the Draw Tite hitch part # 75282 is a confirmed fit for your 2009 Nissan Frontier and will work just fine with a full sized spare like what you see in the picture I attached. view full answer...
It sounds like you may have an electric Sun bike Jo. If you have an electric bike I recommend to use the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 because of the included ramp and easy folding feature.
The rack does weigh 45 lbs but it can be folded in half and is designed with a handle so you can easily carry it to the vehicle. Once you have the bike rack in the hitch you can simply walk the bike up the included ramp onto the rack instead of lifting the bike. The Thule... view full answer...
We do have an option for you as the Hopkins # HM43534 is only for the factory tow package. So because your 2021 Nissan Frontier does not have the factory tow package, you'll need a wiring kit that includes the relay jumper harness which connects to a 12-pin plug that is behind the kick panel on the passenger’s side in the cab. The correct part to add a 7-way is the following:
- Curt T-Connector Vehicle Wiring Harness # C56226
The relays and jumper harness of the # C56226 are not available... view full answer...
The Andersen Ultimate Connection, part # AM3200 connects to the 2016 Nissan Titan XD with industry standard fifth wheel rails. In order to put industry standard rails in the Titan XD an adapter is required.
If your 2016 Nissan Titan XD has a OEM integrated gooseneck then you need Demco 5th wheel rail adapter part # DM6200. The adapter drops into the puck system, locks into place and gives you 5th wheel rails in the bed to use the Andersen.
If your 2016 Nissan Titan XD does not have an... view full answer...
The Curt Trailer Hitch Receiver # C13156 would not be able to fit your 2003 Nissan Pathfinder with your rear bumper guard installed. The guard would need to be removed in order for this hitch to fit on your vehicle. view full answer...
In order to convert the hydraulic disc brakes on your trailer to electric, you will need a electric over hydraulic (EOH) actuator and a breakaway kit. The HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes part # HS381-8067 is an excellent actuator and will work well with your Tekonsha Prodigy P3 Electronic Trailer Brake Controller part # 90195.
For a breakaway kit I recommend taking a look at the Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery... view full answer...
If you will be connecting the MB Sturgis Quick Disconnect Propane Hose for Small Appliance # 100476-120-MBS directly to your trailer then yes, it will work properly as long as the propane is being run through the camp stove regulator as well.
Be mindful that this hose cannot be used on a Coleman high-pressure product that is run off of a low-pressure propane system. view full answer...
I checked with Curt just now and they list the # C13205 as a fit for all models of the 2015 Nissan Murano including the all wheel drive models so it will fit and work well for you. If you check out the picture I attached you can see the hitch installed on a similar Murano and also that there's an AWD badge on the vehicle to show that it fits this model for sure.
I also attached an install video for more info as well. view full answer...
I can confirm for you that the Curt Trailer Hitch Receiver # C11202 for your 2010 Nissan Cube does require a stabilizing strap for use with a bike rack item # 18050. So you can use this rack and hitch combo on your Nissan.
The Thule Doubletrack Pro XT Bike Rack # TH92BJ is a great choice for a bike rack because it offers a ton of value. It is a premium rack from a company, Thule, known for their quality but at a great price relative to other racks. view full answer...
For your 2011 Nissan Pathfinder the running light relay # C57000 you mentioned is located behind the passenger side kick panel as shown in the included picture.
This relay is a pretty common culprit to running lights not working on Nissan vehicles like your Pathfinder. view full answer...
The # HM43575 would work as a replacement, you would need to unplug your current harness and plug in the Hopkins in the 4-pole connector slot; you can see exactly where in the photo I've provided. I've also attached a link to a video review of this product for you to take a look at. view full answer...
There is one rear suspension enhancement for your 2017 Nissan Pathfinder, the Firestone Coil-Rite Air Helper Springs # F4118. These springs can adjust from 5 to 35 psi and will help keep your Pathfinder level from exactly the amount that you haul, at least 500 lbs to no more than 1,000 lbs.
For an onboard compressor you can use the Firestone Air Command II # F2178, which is a dual function compressor that allows you to inflate each of the springs individually to help level your ride. I've... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11563 is a confirmed fit for the 2018 and 2019 Nissan Kicks models. The frame for a 2017 Mexican model appears to be the same from my research but the Indian market frame is different. I can't confirm the fit of this hitch because it has not been physically tested, but from what I can find it does appear your Mexican model Kicks should be compatible. view full answer...
I believe that you are talking about a 2016 Nissan Murano as I couldn't find anything about a Montero. For factory flush rails I recommend the Thule Evo roof rack system which consists of the following:
47" WingBar Evo Crossbars - # TH711220
Rapid Podium Feet - # TH460R
Fit Kit - # THKIT3141
This will enable you to use a kayak carrier with a lift assist, but unfortunately the Thule Hullavator # TH898 that you're wanting to use isn't listed as a fit for your vehicle. Basically you can't... view full answer...
A naked roof means that there are no side rails, crossbars, tracks or anything that could be considered a roof rack on the vehicle. I do not believe the 2014 Nissan Altima had any of those options from the factory so SportRack semi-custom roof rack # SR1010 will fit. I have linked a video review of this roof rack for you. view full answer...
I do have a way for you to determine if it will fit the OEM crossbars on your 2018 Nissan Frontier, but right off hand I don't know if the Rhino-Rack Fairing # RRRF1 is the correct size.
This fairing is compatible with crossbars that have max dimensions of 3-1/2" wide x 1-1/4" tall and that have a minimum height of 7/8". As long as you have at least 26" of space between your crossbar legs this will fit for your application.
Let me know if this isn't compatible with your crossbar and... view full answer...
I do have a grill guard option that will allow you to use the factory tow hooks with your 2017 Nissan Titan XD, however, the Westin HDX Grille Guard with Punch Plate part # 57-3915 is not compatible with the factory tow hooks installed. Instead, you will want to use the Aries Bull Bar with Skid Plate part # AAB35-9004 in order to retain the factory tow hooks. You can also use the License Plate Bracket for Aries part # AA35-0000 to retain the front license plate. view full answer...
The Thule roof rack for your 2015 Nissan Murano consists of the Thule WingBar Evo Crossbars # TH711220, the Thule Podium Foot Pack for Aero Bars # TH460R, and the Thule Roof Rack Fit Kit for Podium-Style Foot Packs # THKIT3141.
This roof rack may or may not clear the antenna on your vehicle depending on the height of your antenna. This roof rack will sit a little over 4 inches above the roof of your vehicle. view full answer...
The etrailer Class III hitch you mentioned, part # e79YR is a fit for your 2019 Nissan Rogue Sport. We estimate that an experienced installer should be able to complete the install in about an hour. Any trusted mechanic should be able to handle the installation with no problem. What you'll pay for the installation will depend on the going rate for hourly ship labor in your area. I've linked you to some installation videos that I hope you'll find helpful.
If you'll be towing a small trailer,... view full answer...
Yes. The Rhino Rack Roof Rack for 2012 Nissan Rogue that uses the parts # RRVA126B-2, # RRRLKVA and # DK146 is compatible with your 2012 Nissan Rogue with a naked roof. As long as your kayak carrier can attach to aero/elliptical shaped bars, which most can, you'll be able to carry two 40-lbs kayaks without any issues.
I've linked a review and installation video of this kit you can check out as well if you need any tips when it comes time to install the rack. view full answer...
Go To Results