We actually have an installer locator that I attached a link to on this page that will help you find someone who can install the Dexter Over Under kit part # K71-385-00 on your trailer. view full answer...
Hi Jeff,
Nice choice with the 100 amp hour Go Power Lithium RV Battery # GP99QR as well as the Expansion Kit # 34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number for that is the following:
- Progressive Dynamics 9300 Series RV Converter Charger - 12V - 60A # PD79RR
This is both a reasonable and quality upgrade to work with the lithium batteries. Then, to answer your last question, you do not need... view full answer...
Hey Dennis, thanks for reaching out!
The Furrion Vision S+ system is what you're looking for as the rear camera will be plug and play like you're wanting.
For a single rear camera, you need the Kit # FR57AD, but if you'd like to install a few more we have the 4-Camera Kit # FR74AD. This will require you to modify your trailer for the additional cameras, but depending on what you want out of an observation system it might be worth it.
The cameras can be used during travel as well as when... view full answer...
Hi Jeff,
I can give you a hand here with suspension upgrades for your 2023 Jayco Greyhawk 27U, though honestly I'd go a different route than the Timbrens # TFEF350 and # TFERSD you mentioned. They'll do their job, but my goodness they can be quite rough on the ride. They are made from a very dense hollow rubber so there just isn't much "give" there and you'll feel it.
The better option is definitely SumoSprings because they'll compress based on the weight being transferred so it isn't... view full answer...
The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-01 for white, or # BV0554-03 for smoke.
I have attached a couple of videos for you to check out as well. view full answer...
Thanks for the picture TJ! Nice set up. Sorry, but the new Furrion Chill Cube item # LC54DX is only compatible with other Furrion Cube components. This is because of the new EPA regulations with the R32 refrigerant. You would need to purchase the Furrion Chill Cube item # FR69TD in white or item # FR49TD black if you would like to upgrade.
A direct replacement for the Coleman Mach 15 model 48254C869 is the Advent Air Replacement RV Air Conditioner for Coleman Setup item # ACCOL150B. This... view full answer...
We do have replacement RV Entry Door Handles like the Global Link # 295-000019 as well as deadbolts like the Valterra # L32CS3108 with 1" throw, but these are keyed separately as we don't have an all-in-one kit with both locks keyed. Alike. You aren't the first person trying to find this solution so I'm hoping one of our manufacturers comes out with an entry door and deadbolt kit keyed alike so you won't need to use 2 separate keys to get into your RV.
Attached is a link to our selection... view full answer...
Hello Jerry,
We have a rack that will work for you, but the Swagman Escapee RV Bike Rack # S39SR will not work with bikes that have fenders. I attached an image to show how the bike rack clamps down on the wheel, the fender would be in the way.
The rack that I recommend the most for e-bikes for the back of an RV is the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount # HLY64FR. This rack is great for bikes with fenders too because of how the clamp can... view full answer...
Hello again Paul; I read that as you wanted to install the batteries and the solar, not that you already had the solar installed, so sorry about that. A DC/DC converter will certainly protect the alternator but whether or not it is necessary is debatable. There are a lot of people towing with lithium batteries that don't have this on their trailer/vehicle and don't experience a problem.
With the solar keeping you topped up it is even less of an issue unless you're boondocking and draining... view full answer...
Hi David; are you able to see a number on the existing shear springs? There are a wide variety of replacements so I will need some more information. For example, if you have an LRE, RS, or SRS with #16 embossed into the rubber of the spring you need the # MR35UR. If you have a #24 you need the # MR95UR and if it is a #20 you need # MR79UR. I attached a link below with all of our available replacements for your reference.
If your shear spring number doesn't match one of the ones we carry... view full answer...
We do have most of the parts that you referenced and although we don't have instructions we do have some diagrams on each of the product pages that you can check out.
Item 7 - # VC0476-00
Item 14 - # BV0115-04
We don't have items 1, 15 and, 16, but it sounds like 15 and 16 come with the item 14.
In all honesty it would be much more cost-effective for you to just purchase a whole new 14" x 14" unit # V2094SP-34 as opposed to piecing it out. You would just need the screws and sealer that... view full answer...
The SumoSprings Trailer Helper Springs # TSS-107-40 are designed for single axle trailer applications, so for your tandem axle travel trailer, you'll just need two of these kits.
These SumoSprings will fit your 2016 KZ Sportmen travel trailer as long as each of the axles is rated between 3,000 lbs and 5,000 lbs and they are overslung, where the springs sit on top of the axle. If your springs sit below the axle, which is the more common setup, you'll want to use two of part # TSS-106-40,... view full answer...
Hey Jeff! I can help you find the right parts to upgrade everything but you're going to need to take some measurements. For the leaf springs, you will need to get the spring eye to spring eye measurement or the flat length as outlined in the article I attached further down on this page. You don't want to go too crazy with a higher capacity or you're going to get a rough ride. 4,000 lb leaf springs like the 25-1/4" Long # e57SR or the 26" Long # e22YR would be a good choice if they match... view full answer...
We do not have the direct replacement for your 1998 Jayco Eagle SD trailer. The Replacement Lenses for Wesbar Wraparound Tail Lights - Left and Right Hand Sides # W003372-73 are the most common replacement lenses and I've attached a photo with the measurements to assist.
If they will not fit, then I recommend updating your tail lights with LED # TLL160RK. I've attached videos to assist. view full answer...
Hey Mike, since your wheelbase is 33 inches the correct MORryde Alltrek is the part # MR89DR. The distance between the bolt holes left to right is 6-1/2 inches which is close enough to what you have and the vertical dimension is 4-1/2 inches which is also close enough.
The correct shackle kit would be the part # MR46ZR which is 2-1/4 inch like you mentioned as well. view full answer...
Hey Justin!
With the current Progressive Dynamics REL 60A 4500 Series Inteli-Power Converter Section # PD4560CSV you'll either need to make a jumper or you'll just need to go with the Converter Section # PD4560LICSV instead, so your power center can handle the Lithium battery style.
To be able to completely switch between both modes you'll need a whole new power center with the part # PD4560K18LS8. view full answer...
Hello Martin,
Unfortunately not; I googled the Hercules website and they say their 235/8516R requires a wheel that is 6-1/2" wide at minimum or 7" wide at maximum, and the # AM20744 is a 6" wide rim.
We do have a 235/8516R load range G tire that fits the # AM20744, however; which is the Provider ST235/85R16 Radial Trailer Tire # TTWPRG235R16.
This is a 14-ply tire like the Hercules, and the only other thing to keep in mind is for the wheel you'd need Valve Stem # AM20906.
As for the... view full answer...
Hey Lee,
For your specific pin box and bolt pattern we do not have a Curt Helux for it yet. Based off of your photo the pin box on your trailer is going to be the Lippert 1621 model, or the Lippert 1621 bolt pattern. We do have a # LC369535, Curt Flex Air, pin box available for that bolt pattern. This is not going to be up to the the 24,000lb, but offers a 21,000lb capacity on it. There is a Gen-Y option for you as well, # GY68GR, for a 30,000lb capacity.
Like the Curt Hellux internal... view full answer...
Hi Mark; the only jack like that is the Lippert Power Stance Electric Trailer Jack # LC89VR but it exceeds the amount you're looking to spend. If you're fine with one that only runs off of the 7-way then I recommend the etrailer Electric Trailer Jack w/ 7-Way # e74GV. Most of the time people get a jack that wires directly to the trailer batteries like # e55ZV but you can really do whatever works best for you.
If you're connected to the batteries you don't have to position your truck to... view full answer...
I would recommend the Roadmaster Comfort Ride system part # RM-2460-2560 for your 2021 Jayco Jay Flight SLX 184BS that has 4,400 lb axles. This kit will give you all new suspension/leaf springs like you are looking for but since it comes with shocks too you will see a dramatic improvement in the ride quality of the trailer. Shocks are normally not used on trailer suspension and are a big reason why vehicle suspension is so much smoother since it slows the movement of the suspension down. view full answer...
Go To Results