The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-01 for white, or # BV0554-03 for smoke.
I have attached a couple of videos for you to check out as well. view full answer...
We do have replacement RV Entry Door Handles like the Global Link # 295-000019 as well as deadbolts like the Valterra # L32CS3108 with 1" throw, but these are keyed separately as we don't have an all-in-one kit with both locks keyed. Alike. You aren't the first person trying to find this solution so I'm hoping one of our manufacturers comes out with an entry door and deadbolt kit keyed alike so you won't need to use 2 separate keys to get into your RV.
Attached is a link to our selection... view full answer...
For your 2002 Jayco Heritage Pop-Up camping trailer, I recommend the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019. This latch fits doors that are 1-1/4 inches to 1-1/2 inches thick and installs into latch cutouts that are 2-1/2 inches wide x 3-1/2 inches tall to 3 inches wide x 4 inches tall. view full answer...
Yes, the Ventline Pinnacle Ducted RV Range Hood with Light # VE98SR can replace your existing High Pointe range hood. This has the same dimensions at 20" wide x 18" deep x 4-3/4" tall. There will be a small difference in the vent opening since this is 9-5/8" wide vs 10" wide on the High Pointe but that won't be an issue. view full answer...
It looks like the gross weight rating of your Jayco Jay Flight G2 32BHDS is 9,950 pounds. I am thinking that it has two 5,200 pound axles OR two 4,400 pound axles because they assume the tow vehicle is supporting 13 percent of the trailer tongue weight.
If they are 5,200 pound axles then you would need 12 inch brakes with a 5 bolt mounting pattern such as # AKEBRK-6.
If they are 4,400 pound axles then you would need 10 inch brakes with a 4 bolt mounting pattern such as # K23-462-463-00.
You... view full answer...
The # PXXMCOVER (30-5/8" long x 25-3/4" wide x 10-1/2" tall) is a fit for Advent Air RV AC units, with these part numbers: # ACM135, # ACM150, # ACM135C, # ACM150C, # ACM135CH, # ACM150CH, # ACCAR135, # ACCAR150, # ACCOL135, # ACCOL150, # ACDOM135, and # ACDOM150.
Other than the AC135, are there any other model numbers or a manufacturer name anywhere on the unit? I'll need more information to determine if any of the replacement shrouds we offer will fit. view full answer...
Thank you for including the model number of your fan, 04751KS, which was exactly what was needed to find your replacement circuit board.
The correct part for your MaxxAir MaxxFan Plus Roof Vent 4751KS is:
- Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents # MA10A04751KS
This is the correct replacement circuit board for models 4751KS, 4761KS, and 4951KS. I have added a link to a video review for you to check out as well. view full answer...
I'm glad to hear that you and your wife are okay as that can be a terrifying experience.
I reached out to my contact at Reese and he said that what you experienced was definitely a freak accident and that you can safely tow with your Reese Titan 20K 5th wheel hitch when you replace the Pivot Pin # RP58456. He had never heard of that happening and when he checked their records he only saw 1 other time that this has happened to somebody so what you experienced is a unique situation that... view full answer...
We do not have the direct replacement for your 1998 Jayco Eagle SD trailer. The Replacement Lenses for Wesbar Wraparound Tail Lights - Left and Right Hand Sides # W003372-73 are the most common replacement lenses and I've attached a photo with the measurements to assist.
If they will not fit, then I recommend updating your tail lights with LED # TLL160RK. I've attached videos to assist. view full answer...
There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information.
The current available models are the 32 Series # LC372261, 42 Series # LC372779, 40 Series # LC3726892, 34 Series # LC3722863, and Platinum Series # LC372558. Any information you can find on your steps will help narrow it down. view full answer...
Lippert Components Heavy-Duty Replacement Shock - Yellow # LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch measurement.
If you need replacement brackets, you can use the kit # LC281281. view full answer...
The HydroMax RV Fresh Water Pump # P25201 referenced in your question works as a direct replacement for a 3-gallon-per-minute (GPM), 12V pump. Based on my research, it looks like your existing Shurflo 2088-403-144 pump features these same specs so it should work great as a replacement. I do recommend verifying the specs on your particular model though as it looks like there may have been a couple different versions of this Shurflo pump.
I have attached some short video demonstrations... view full answer...
Yes, the Replacement Right Side Ratchet Winch part # DM5433 and Replacement Left Side Ratchet Winch part # DM5432 are confirmed fits for a Demco Kay Kaddy Tow Dolly KK360. view full answer...
Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the # 14125A outer and # 25580 inner bearing found in the Timken # TMK92VR. However, there are two different grease seal sizes used for this axle capacity so you will need to identify the correct grease seal before picking up a bearing kit.
The # TMK92VR uses a 10-36 seal with a 2.250" inner diameter. If you find that... view full answer...
Thank you for the information!
Your 2019 Jayco is equipped with a 3,500 lb axle so to replace the brakes I recommend using the etrailer Electric Trailer Brakes # AKEBRK-35-SA which are self-adjusting. If you want to stick with a name-brand brake kit then you'll want the Dexter Nev-R-Adjust # 23-468-469 brake kit instead.
Attached are some installation videos for you to check out. view full answer...
The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use # MR46ZR or for 3-1/8 inch shackle links, use # MR76ZR.
If your suspension uses the Correct Track alignment/lift kit, use # MR58ZR for 2-1/4 inch links or # MR98ZR for 3-1/8 inch shackle links. view full answer...
The division at Atwood that handled the jacks and landing gear was sold off to Lippert so direct replacement parts are not available. But it is likely that the gear box and motor of another brand will still fit. And yes, the gear box and motor do just sort of hang there.
Gear box # RVLG-RDBOX is one possible option. With it you can use motor # M1230. For the driver leg D shaft there were 3 possibilities for Atwood landing gear depending on which model it is (standard duty, heavy duty,... view full answer...
The picture came across pretty blurry, but I was able to pull enough off of it to determine that you have the Kwikee RV Electric Steps - Platinum Series # LC372558.
The correct replacement motor for those steps is the Replacement Motor for Kwikee Electric RV Steps # LC379147 view full answer...
The # PD4590LICSV converter would indeed be the correct Lithium compatible upgrade for your existing PD4590K18NS2 4500 series RV Power Control Center. I've confirmed this with Progressive Dynamics.
I've linked to a product description and an install video that you might find helpful. view full answer...
I have attached for you a set of photos which are used to identify the landing gear legs on a trailer. I assume you have either the older Lippert Ground Control 2.0 Leveling System or the newer Lippert Ground Control 3.0 Leveling System. If that is the case then the easiest way to tell which is which is to note the shape of the rear jacks. If the jacks are square then you have the Lippert Ground Control 2.0 Leveling System therefore need the Replacement Heavy-Duty Landing Gear Jack Leg... view full answer...
Go To Results