Yes, you can swap out your cap sensors for internal sensors and they will work with your current TST-507-RV-4 system. We offer the internal sensors individually with part # TST-507-INT-S1. Definitely a good idea if you don't want to have to worry about a sensor going missing. The internal batteries usually last at least 5 years. view full answer...
The only way to really know if your 2023 Toyota Highlander LE has the factory tow package or not is to contact your local Toyota dealer with your VIN. They can tell you exactly what features your vehicle came with.
Vehicles with the factory tow package would have the connector right behind the bumper like you described. So based on that, it sounds like you do have the tow package. We still recommend having a dealership run your VIN to be sure. If you do have the tow package, we suggest... view full answer...
We do carry the 33" Ark Stabilizer Jack that you are looking for with part # ARK77FR.
I was able to track down a few drawings that you should find helpful. These are for the 30" # ARK94FR and the 24" # ARK34FR Stabilizer jacks. I'm afraid we don't have a drawing for the 33" jack. view full answer...
I do have a potential option for you, but unfortunately we do not offer an air bag kit for your 2023 Chevrolet Silverado 1500 High Country Duramax 3.0L 4x4 with adaptive ride control suspension. We do have the # F2609 kit from firestone which does fit trucks with the adaptive ride control, but it will not fit Diesel models.
We would have to go in a different direction to enhance the suspension on your truck. Your best bet will be a RoadActive Suspension Custom Leaf Spring Enhancement... view full answer...
The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information.
The JR Products Automatic Changeover RV LP Gas Regulator # 37207-30395 is rated for 345,000 BTU per hour for the Service Cylinder and 260,000 BTU per hour for the reserve cylinder.
The JR Products Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator... view full answer...
We have spoken to Fan-Tastic Vent about this issue in the past, and they have confirmed that there are no replacement remotes available for the 6500 model as it's no longer in production. So if you want to still use your existing fan but also wanted a remote, they said what you can use is the Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359.
However, this is similar to getting a brand-new vent, so you can go that route, with a number of different options. For a powered lift with a remote... view full answer...
We definitely have a solution for you that will allow you to carry your two bikes though not the exact adapter you are asking about that already has a ball mount. The first option is to use a dual hitch adapter which does have the needed clearance between the top and bottom receivers, though you do need to ensure you get the one that has the correct rise or drop.
For that you can use the Roadmaster Dual Hitch Receiver Adapter, 6" Drop/Rise # RM-077-6, 8" Drop/Rise # RM-077-8 or 10" Drop/Rise... view full answer...
As you can see in the diagram I provided, the tilt is adjustable up to about 45°. The tilt mechanism has a pin that can be used in two different positions to allow a roughly 15 or 30° degree tilt or the pin can be completely removed for the maximum 45° tilt. If you click the provided link, you can see a product description video. view full answer...
I spoke with the manufacturer, Command Electronics, about the 12V RV LED Puck Light # CE68ZR and found that it has a warm white - 3,500 kelvin rating. view full answer...
The general reason a battery needs to be disconnected for flat towing is because there are certain functions that need to be disabled to prevent your vehicle's battery from draining. You wouldn't want to get to your destination and unhook and then have a dead battery and not be able to move your vehicle. You should always follow your vehicle's manual to the letter to prevent damage to your vehicle.
If you want to install a switch to make disconnecting and reconnecting the battery simple... view full answer...
Your trailer uses an open eye leaf spring like # e24SR. Over time as the leaf spring softens the gap you are seeing will get bigger. As long as the leaf spring is not falling off the hanger when you raise the trailer weight off the axle they do not need replaced unless visibly damaged.
Since the overall length of the spring changes as the spring wears I recommend measuring the length of your spring on the radius of the spring(see image). Since this measurement remains the same it ensures... view full answer...
To initially adjust the brakes, you will need to raise the trailer and secure it on adequate capacity jack stands. Check that the wheel and drum rotate freely. Do not lift or support trailer on any part of the axle or the suspension system. Remove the adjusting hole cover from the adjusting slot on the bottom of the brake backing plate. With a screwdriver or standard adjusting tool like part # W80630, rotate the starwheel of the adjuster assembly to expand the brake shoes. Adjust the brake... view full answer...
Trailer Brakes are not required on most trailers under 3,000 lbs unless otherwise stated by the local authorities. This should not be an issue with safety behind your 2014 Subaru Outback, but you can add them if desired. I would just need you to pull a hub and let me know the number on the grease seal and the face of the 2 bearings in that hub. With that info I can get you the parts needed for the upgrade.
The bigger issue with a trailer this size and weight is sway caused by wind... view full answer...
A typical tire should run around 158 degrees Fahrenheit once the tire is warmed up going down the road. So 130 degrees on a tire like the Westlake ST235/75R15 Radial Off-Road Trailer Tire # WST54FR is just fine. This can obviously vary depending on the weight of the trailer, how fast you're traveling, driving habits. While 130 is probably "normal", it isn't really a standard to try to stay at.
I would say that you want to avoid hitting the 167 degree mark, that is usually when problems... view full answer...
I have attached a page from the installation instructions for the Extang Solid Fold 2.0 Hard Tonneau Cover # EX83475-62.
The page shows the parts that should be used with the rear panel you said blew off. You can look at the page to make sure all of the parts shown are still with the rear panel. view full answer...
You will still need a solar controller when using the 7-Pin Trailer Adapter for Go Power Portable Solar Kits # 34270357.
So it won't replace a solar controller it will actually plug right into it (via your 7-way) when using a portable solar panel like the Go Power Portable Solar Panel with Digital Solar Controller - 130 Watt Solar Panel # 34282730 or 200 Watt Solar Panel # 34282610. view full answer...
Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of height to the trailer. view full answer...
There are two different Thule Elite Van XT 2 Bike Racks, part # TH302043 for Sprinters or part # TH302013 for ProMasters. I have attached an install photo below of the model for ProMasters with bikes attached. I checked with Thule for you but this is the only photo they provide of the rack installed. view full answer...
I have a solution for you, it is a smaller fan unit but we have an item that will function in the way you are looking for. The MaxxFan Mini Plus Manual RV Roof Vent, # MA00-03851 that you linked to needs a fairly stable power supply of 12 VDC and draws slightly less than 2 amps to operate. Wiring directly to solar panel will not support this as the power will fluctuate greatly and eventually damage the electronics in the in the fan. To operate, you need a stable 12 VDC power supply from... view full answer...
Go To Results