When wiring up the Deka Battery Isolator # DW08771 the main/first battery will connect directly to position one on the isolator without the need for a circuit breaker. The second battery though should be attached to the second position on the isolator via a circuit breaker that is rated appropriately for the battery. The alternator will go to the A post on the isolator.
I have attached a diagram that you might find helpful as well.
You should not have to worry about the second battery... view full answer...
Hello Nate, sure can! The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part # PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now. We get asked about replacing those ole Magnetek converters all the time, so this has been confirmed on many occasions to be the correct replacement. This new unit can work with Lithium batteries too, if you ever want to upgrade. view full answer...
As long as your 1994 Dodge Van B-Series features the standard bumper, I recommend the Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 75140. This Class III hitch is custom-fit for this vehicle, which means it will use existing holes in its frame for a no-drill installation. It features a tongue weight capacity of 500 pounds and a towing weight capacity of 5,000 pounds. I highly recommend checking your copy of the owner's manual to verify the vehicle's towing capacity, as you will... view full answer...
We have a system that will work great on your 1996 Roadtrek.
I recommend the RoadActive Suspension Kit, part # RAS4612-DV. This system not only adds strength to the leaf springs but it also helps reduce sway and body roll.
I called my contact at RoadActive and they said you will want to make sure you have at least 4-inches clearance above the leaf springs from the center of the axle back to the rear eye on the leaf spring to get this to work. view full answer...
Hey Donald. The best rear sway bar for your 2001 Dodge Roadtrek 3500 is going to be the Roadmaster item # RM-1129-111. This 1-3/8" diameter sway bar is going to tighten up your rear end. It'll reduce body roll, improve stability, and help with that wobbling top heavy feeling you're experiencing.
The Roadmaster item # RM-1129-111 comes with all of the installation hardware and brackets you'll need to get it installed. I've linked the installation instructions below so you can see how to... view full answer...
Hello John; with that part number it sounds like you have the Coleman-Mach 7330-714. The correct replacement shroud would be the # MA00-325001. Take a look at the measurements in the diagrams below and compare that to what you have now to see if it will fit. view full answer...
For the Replacement 3-Speed Switch for Fan-Tastic Vent Roof Vent, part # FVK1031-05, the left terminal (B) is for the battery, the upper right (C) is for the circuit board, and the lower right (M) is for the motor. Refer to the picture below.
The colors the wires have are generally:
Battery - Black
Circuit Board - Yellow
Motor - Red
If your fan does not have 3 wires to connect to, then try connecting the two wires you have and testing to see if the switch still functions. If it does not,... view full answer...
There are three hitches that fit the full-size 1987 Dodge Van with a standard bumper. These are parts # 75140, # 87492 and # C13041.
The hitches that fit the 1995 Dodge Van (again the full-size with standard bumper) include three shared parts, # 75140, # 87492 and # C13041. But the other hitches that fit the '95 are not common fits with the '87. The hitches for the '95 appear on the linked page.
If you have a hitch that can fit the '95 you can install it using Replacement Hardware kit # RHK. view full answer...
I do have a rear bumper you can use on your 2003 Dodge Ram Van 1500 but we do not carry any OEM parts. You would need to contact your local dealer's parts department in order to obtain an OEM bumper. However, you can use the Westin Fey Surestep Rear Bumper part # 76001 which is the bumper you referenced and very similar to the one in the attached photo with the Installation Kit for Westin Surestep Bumpers part # 92230. The bumper brackets will be an exact match for the bumper but you will... view full answer...
The Roadmaster Rear Anti-Sway Bar # RM-1129-111 that you referenced sits in front of the rear axle with just a little of it sitting behind, but it shouldn't be enough to interfere with the large fuel tank that you have on your 1991 Dodge B250. My contact at Roadmaster confirmed this.
I have attached a link to the installation instructions for you to reference. view full answer...
Your 2021 Forest River Flagstaff E-Pro E15TB has a GVWR of nearly 3,900 lbs, so a good estimate for your loaded tongue weight is going to be in the 450 lb - 500 lb range. For that tongue weight, what you will need for a weight distribution hitch that will give you the rise you need is one from Blue Ox:
- Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank # BLU36FR
The TrackPro # BLU36FR has a maximum rise of 8 inch, and is for loaded tongue weights between 200 lbs and... view full answer...
Hi Mitchell, great question because this is one of those details that can be really confusing at first glance, and I’m glad you asked before ordering.
The difference between the Hellwig EZ-990 models part # HE62FR and part # HE85VR comes down to fitment, specifically the width of the leaf springs they’re designed to mount to. The HE85VR is designed for 3-inch wide leaf springs, while the HE62FR fits 2-1/2 inch springs. Both kits provide the same type of load support, so performance-wise... view full answer...
Hey Jeff, we have a 12 foot section of propane hose with POL fittings on both ends with the part # CAM59103 that could be used as an extension. We don't have anything shorter though. view full answer...
Without knowing what you mean by European taillights or seeing pictures it's pretty hard for me to recommend you the correct replacement lens.
The best solution I can provide for you would be to check out the link I attached to the right that has all of the replacement lenses we offer.
There is an off-chance that you may be looking for the part # 34-84-700 or the # 34-85-750. view full answer...
It sounds to me like your RCA cables or HDMI cable could not be making full contact (i.e. not fully plugged in) or could just be bad. I would start by replacing the RCA cables # DG52485VP and the HDMI cables if they are fully plugged in and still not working properly.
You'll also want to check to ensure your wiring harness is properly wired. If after all of this it's still not properly working your Drive BT100 Stereo # 324-000148 may have an internal issue that would require you to contact... view full answer...
Hey Dylan, we have a similar Furrion RV AC unit that does come with a remote like with the Furrion Chill Cube part # FR69TD but the Low Profile Chill HE part # FR86AD does not come with a remote or a way to add one. view full answer...
Hello Kenzie, thanks for reaching out. We do offer a custom fit hitch for the 1995 Dodge 2500 Van. Take a look at the following:
- Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13041
This will fit full size van models with the standard (non-step) bumper. Access holes will already be present on the frame, so it can be installed with no drilling. It has a 6,000 lb towing capacity and 600 lb tongue weight rating.
What will you be using the hitch for? Hauling a trailer? view full answer...
Hey Dylan, thanks for reaching out!
As long as the tow bumper on your 1999 Dodge Van has the same profile as the Factory Step Bumper, and the hitch ball doesn't sit below the bumper (the shank part of the hitch ball) then the Curt Trailer Hitch Receiver # 13590 will fit just fine. view full answer...
Hey Jon,
It doesn't look like there's a plug-in connector for the Tekonsha BRAKE-EVN Trailer Brake Controller # TK63VR in your 2000 Dodge Ram Van so you would need to use a universal wire harness # 7894 and splice it into the factory wiring in the following manner:
Black - 12v power with inline circuit breaker # 9506P
White - Ground
Blue - Brake output pin on 7-way
Red - Cold side of the brake light switch
To find the cold side of the brake light switch you'll need to probe # PTW2993... view full answer...
For your 1997 Dodge Ram 1500 van we have the Curt hitch part # C13041 as a confirmed fit but the # 13590 is not what you would need. The cut out in the side of the mounting bracket is designed to fit around your gas tank feed line. view full answer...
Go To Results