To replace your Lippert Touch Audio VD300WR Stereo System I recommend the iRV RV Stereo - Double DIN - HDMI, AUX, Bluetooth, App Control - 50W - 3 Zone - 12V Item # IRV64FR. It is a little bit different in size so you'll need to install a dash plate to cover the gap. view full answer...
Using two adapters together would lower the weight capacity by 50% so you wouldn't be able to flat tow your Jeep using the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 and a high low adapter. view full answer...
Your Dometic model number 80611342 came back as a 13,500BTU unit so the only other information we'll need to know is the what style connector your unit has. Dometic units will either come with a 6-pin or 9-pin connector (pictured below). The units we currently offer only come with a 6-pin connector so you'll need an adapter if your current unit had a 9-pin. To find this you'll need to remove the cover of your air distribution box and find the wire harness that hangs down from the rooftop... view full answer...
Yes, the Adco SFS AquaShed Cover is actually going to work better for you than the Adco All Climate Cover. The reason for this is that the AquaShed is better suited for wet climates with warm weather and high humidity whereas the All Climate is more for climates with heavy snow and wind. The All Climate has a thick tyvek top panel which will not be as breathable as the triple-layer top panel on the AquaShed.
If you can let me know what floorplan you have on your 2017 Coachmen Catalina... view full answer...
Since the Progressive Dynamics 9300 Series RV Converter Charger # PD49RR can work with both lead acid and lithium batteries it's going to be the better option over the Progressive Dynamics 9100 Inteli-Power Lithium Converter # PD9130LV, which is only lithium compatible. If you wait to buy the lithium batteries or decide later on you want to switch back to lead acid you won't have to purchase a new converter in order to be compatible. view full answer...
Yes, you'll need capture plate # GY98FR in order to tow a trailer with a Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box # 325-GH-8040 using a Demco Autoslide 5th Wheel Hitch # DM8550034. As the head of the Autoslide turns it slides back giving you more turning clearance. Without a capture plate the king pin would be able to rotate in the jaws of the hitch and wouldn't force the head to turn and slide back. view full answer...
The Dexter E-Z Flex Suspension Kit # K71-652-00 you found is the correct system to use on your 2019 Coachmen Freedom Express Blast 17BLSE travel trailer toy hauler. This kit will include the equalizers along with new shackles and wet bolts.
I recommend using the Grease # L11390 with these parts since it is highly resistant to water and good for use in extreme heat and cold. The Grease Gun # L30416 having the rubber hose will make it easier to reach all the different grease zerks to properly... view full answer...
The cable length for the Go Power Industrial Pure Sine Wave Inverter # 34279950 can't extend past 10' so you would need to either install a second battery closer to the fridge or use a different style inverter, like the Progressive Dynamics 1800 Watt Inverter w/ Transfer Switch # PD44FR.
This inverter would wire into your AC distribution panel and then into a sub-panel where you would move the circuit breakers for anything you want to be powered by the inverter to. This is a lot more... view full answer...
The dual unit AC systems that we currently offer do not offer a heat function, but can be connected to a furnace in order to control both the heat and cooling functions with just one thermostat. If that's what you're looking for then I recommend the Furrion Chill HE RV Air Conditioner System # FR24FJ or # FR47FJ for black. view full answer...
Thanks for the picture! The Optronics Flexible LED Light Strip item # UCL90CB is extremely versatile. It will connect to any 12-volt power source so I am sure whatever power source and switch your lights are currently running off of will work with these. They do not come with their own switch so I hope that clears up the confusion.
The Optronics Flexible LED Light Strip item # UCL90CB is 17' long so you will just need one spool. You will need to use one of the Optronics LED Light Strip... view full answer...
We have a couple of options for spare wheels that may work on your Coachmen Leprechaun. You will want to measure the pilot hole of one of the rims currently on your motorhome to determine which one will work for you.
4.75 Pilot Hole - Dexstar Dual Wheel with Offset item # AM20783
4.77 Pilot Hole - Vesper Steel Dual Trailer Wheel item # TA56FR
Both of these are 16" x 6" wheel with an 8 on 6-1/2 bolt pattern.
Please note that trailer wheels and wheels for a motorized vehicle aren't the... view full answer...
The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks # ARK34FR are 16.6" collapsed and 23.6" extended, while the Ark # ARK94FR 19.5" collapsed and 30.5" extended.
So you'll want to measure the distance from the ground to the frame where you plan on installing the stabilizers and use the lengths to find the right size. You just want to be sure the lengths... view full answer...
You can use the Furrion Vision S with Side Cameras kit part # FCE48TASL-05 on your Coachman Apex travel trailer that was pre-wired for a Voyager but there isn't an adapter available. Instead all you'd need to do is remove the wiring to the current connector and run it to the wiring of the Furrion. Basically the connector has a running light and ground circuit to it which you'd then need to match to the Furrion.
The Furrion side cameras would not work with the Voyager rear camera. view full answer...
Yes, the Replacement Foot Pad for Lippert Hydrualic Leveling System # LC324269 will work with your Lippert Level Up system, on your 2018 Coachman SportsCoach 407FW.
I have attached a picture of this foot pad being used on a Level Up system. view full answer...
You shouldn't have any issue opening the rear doors of your Coachmen Galleria 24t motorhome with the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out # HGK826 installed. You can see in the attached photo that this cargo box allowed full access to the rear cargo area of a Roadtrek RV built on a Mercedes Sprinter chassis. To be extra sure that this will work for your application, measure from the hitch receiver pin hole all the way to the rear-most edge of the door when it is... view full answer...
You are better off with what is called an over/under kit, the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00.
The # K71-384-00 lifts your trailer approximately the same amount as your axle's diameter plus the height of the leaf spring pack, so you'll have more room. Then, you can go to a larger tire and wheel, the Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel # AM32153.
You'll have the needed height if you go with the over/under kit and this tire and wheel,... view full answer...
MORryde does not make the Premium Rubber Suspension Kit item # MR97ZR for trailer's that have a 42" wheelbase. They do make the MORryde 14-3/4" Shock Absorbing Equalizers item # MR34AR. These are specifically designed for 42" wheelbases.
You can also use the MORryde X-Factor Crossmember item # MR33WR.
I have linked a product review video below. view full answer...
There could possibly be a refrigerant leak in your condenser unit so swapping it out would be the correct choice. The Furrion Chill HE Replacement RV Air Conditioner # FR82PV would be compatible, but you could possibly save a couple bucks if the wire harness adapter isn't needed. If you remove the cover on your air distribution box you should be able to see your controller and see a wire harness hanging down from the condenser, plugging into the controller.
If the plug has 6-pin connector... view full answer...
Go To Results