Your best option for a 3-bike rack would be to use a hitch, the Curt # C13383, which is a fit for your vehicle, and a hitch-mounted bike rack. The reason for this is the Hollywood Racks Over-the-Top 3 Bike Rack HRF2-3 must be attached to a trunk or hatch lid made of steel and because your 2017 Chrysler Pacifica hybrid does not have that, you will not want to use this rack.
In addition, I do not recommend using the Yakima trunk-mounted racks that fit your Pacifica either, because the upper... view full answer...
Yes, the CE Smith Roller-Style Guide-Ons part # CE27610 will fit your EZ Loader boat trailer. The brackets work with trailer frames up to 3" wide x 4-1/4" tall so your 1-1/2" wide x 4" tall frame will not be an issue. I have attached a sample install video for you as well. view full answer...
There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit. The Curt hitch comes with the correct ball mount, hitch pin, and clip. For a ball you can use # 19256 for 1-7/8 inch diameter or # 19258 for a 2 inch diameter.
For trailer wiring, use the Vehicle Wiring Harness, # C56211. I have included a link to the installation instructions for the hitch and for the wiring harness for you. view full answer...
The Curt Trailer Hitch Receiver # 13364 will accommodate your spare tire on your 2016 Chrysler Town and Country no problem. This is actually designed to fit around Stow-N-Go seats so you should have plenty of room!
Attached is an installation video on a similar 2016 Town and Country that you can check out. If you let me know what you plan on using the trailer hitch for I can make additional recommendations as necessary. view full answer...
Yes, I can confrim for you that the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56399 WILL fit your 2017 Chrysler Pacifica LX.
This connector fits both the LX and the Touring models and will work for you. view full answer...
You can use trailer wiring harness # 22121 to add a 7-Way to your 2011 Chrysler Town and Country that did not come with a factory 7-Way or tow package. If you also need a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable.
All vehicles with automatic transmissions have some type of cooler. It is usually built into the radiator. However factory coolers are adequate at best for cooling transmission fluid so if you are towing then it would... view full answer...
Great news! We do offer a a hitch for your 2018 Chrysler Pacifica Hybrid.
I recommend the Curt Class III Round Tube Receiver Hitch part # C13383 because the 2" hitch will be the most versatile when it comes to accessories like bike racks. There are more options to fit the 2" hitch compared to the 1-1/4" hitch. The Curt 2" hitch is a glossy black powder no drill-installation hitch that can handle up to 400 lbs of tongue weight.
If you prefer a matte black option for a more rugged look,... view full answer...
We do offer a concealed-style Curt Class III hitch that will fit your 2020 Chrysler Pacifica, but the # C65CR that you'd looked at isn't compatible with the Hybrid model. For the Hybrid, you'd want to go with the similar
# C29UR.
The hitch includes all necessary hardware to complete the installation, and really the only specialty tool needed would be a torque wrench that can be borrowed from a neighbor/friend/relative or the loan a tool service offered by many auto parts stores. The instructions... view full answer...
The best way to determine which ball mount is right for your 2005 Chrysler 300c and your trailer is to take a few simple measurements.
Since you don't have the hitch we can see by the video of the Curt # 13465, I've attached, that the hitch receiver is going to be 10-1/4 inches from the ground. You will then want to take a similar measurement from the bottom of the coupler to the ground. Then compute the difference.
If the hitch height is greater than the trailer height, then
•hitch... view full answer...
Nice Shrimp Trailer! The only information I have been able to find on Shrimp trailers is they were made in Canada but are no longer in production. The Hudson Bay company was based in Canada and was bought out in 2008. view full answer...
Since the total weight of your kayaks is 139.2 lbs and your 2017 Chrysler Pacifica Limited is rated for 150 lbs then you can definitely transport all 4 on your roof!
For your application I do recommend using the Rhino-Rack Nautic # RRS520 over the Thule Stacker # TH830 because it isn't as wide which will help with your crossbar space.
You can use the Rhino-Rack Anchor Straps # RRRBAS-2 for attachment points at your hood and hatch and then the Rhino-Rack Cam-Buckle Cinch Strap and Anchor... view full answer...
The Thule Passage 2-Bike Carrier # TH910XT will absolutely fit your 2018 Chrysler Pacifica and be a great way to safely haul your bikes from Arizona to Washington and back. The Passage uses anti-sway cradles which means your bikes are going to be secure to the rack and not come into contact with each other or your Pacifica.
Just keep in mind this bike rack has a 35 lb per-bike capacity so you need to make sure your bikes weigh less than that (which most do unless they are electric bikes)... view full answer...
The Rightline Sport 3 XL Rooftop Cargo Bag # RL100S30 will fit just about any vehicle roof regardless of whether or not it has hardware, side rails or crossbars.
If the Town and Country is equipped with a factory-installed roof rack then the crossbars are the self-storing type that fold into the side rails when not in use. I reviewed the owners manual for this vehicle and it does not specify the dimensions or spread of the crossbars (but I was able to verify that the roof weight capacity... view full answer...
Yes, the # e98903 that is displayed on etrailer.com will fit your 2021 Chrysler Pacifica; this is confirmed to fit both the hybrid and non-hybrid models. view full answer...
The Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 is not designed to carry kayaks, but I don't see any reason why you couldn't attach the kayak carriers to the two end bars. The kayak when strapped in will further restrict movement, so that wouldn't be an issue. The tongue length from coupler to front gate is 44-7/8 inches. The tailgates have a weight capacity of 250 lbs for the front gate and 100 lbs for the rear gate, so your kayak and carrier... view full answer...
I reviewed the written installation instructions for the Draw-Tite 2-inch Class III hitch # 75579, which is a confirmed fit on your 2008 Chrysler Town and Country, and I found no reference to issues installing this hitch on vans with electrically-operated third row seating. But to make absolutely certain that this hitch will work for you I called my technical contact at Draw-Tite.
Draw-Tite confirmed that this 2-inch hitch # 75579 will fit just fine on your van. I linked for you a video... view full answer...
The Malone Profile18B Rooftop Cargo Box # MPG911 can accommodate a crossbar spread of 25" to 40". Based on the limited information I could find on the Stow N Place roof rack your 2019 Chrysler Pacifica uses, it allows you to position the bars with either a 27" or 40" crossbar spread. You can always verify this on your Pacifica if you are unsure of these measurement. view full answer...
For installing the etrailer Trailer Hitch Receiver # e98903 the holes that may need enlarged are where you insert square hole spacers with the carriage bolts. It sounds like you did not have this issue on your particular vehicle. We do make mention of the hole enlargement for the emissions canister in step 5 and 6 which will need to take place only on the drivers side attachment holes. You can also watch the installation video which I linked at the bottom of the page near the installation... view full answer...
Yes, they do so long as the inner span of your A-frames are a minimum of 13" wide. The arms of the Yakima FullSwing Bike Rack item # Y02465 measure 12-1/2" apart. This bike rack has a 40 lbs capacity per bike. Since you would only be hauling three bikes you will want to leave the outer cradle open and mount the first bike on the cradle closest to your van. view full answer...
Thanks! The best hitch for a 2021 Pacifica Hybrid is going to be the etrailer Hitch item # e98903. This is a class III hitch with a 2" receiver that will give you the most capacity for hauling a bike rack. It is custom fit and bolts to your minivan with included hardware.
I have linked an installation video below and attached a couple of pictures so you can see what this hitch looks like once installed.
You won't need any additional parts to use the Thule Hitching Post Pro item # TH934XTR... view full answer...
Go To Results