Will Draw-Tite Class III Hitch 75579 Fit 2008 Chrysler Town and Country with Powered 3rd Row Seats
Updated 08/14/2017 | Published 08/12/2017
Products Featured in This Question
Question:
My 2008 Town and Country Limited has the third row seats that stow electrically. Are there any special requirements for this installation? Thanks.
asked by: Jay T
Expert Reply:
I reviewed the written installation instructions for the Draw-Tite 2-inch Class III hitch # 75579, which is a confirmed fit on your 2008 Chrysler Town and Country, and I found no reference to issues installing this hitch on vans with electrically-operated third row seating. But to make absolutely certain that this hitch will work for you I called my technical contact at Draw-Tite.
Draw-Tite confirmed that this 2-inch hitch # 75579 will fit just fine on your van. I linked for you a video showing this hitch being installed on a 2008 T&C.
If you also need a wiring harness for a trailer you can use Tekonsha 4-pole kit # 118552. This will provide a 4-pole trailer connector to deliver lighting signals and it will also protect the van's wiring from electrical faults. An install video for this item is included too.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Does Draw Tite Hitch DT75GR Fit 2025 Mercedes GLE 450
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Rear Bumper Clearance for the Draw-Tite # 76025 on a 2012 Honda Odyssey
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Where is the Cold Side Brake Wire on My Jeep Grand Cherokee for Installing Demco Stay-In-Play?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Current Version of Voyager Multi Camera Controller CSW3
- Q&A: 3 Camera Multiplexer Recommendation for RV with 3 Cameras
- Article: Dealer Spotlight - Croft Trailer and Hitches
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
Adam R.
8/14/2017
I reviewed the written installation instructions for the Draw-Tite 2-inch Class III hitch # 75579, which is a confirmed fit on your 2008 Chrysler Town and Country, and I found no reference to issues installing this hitch on vans with electrically-operated third row seating. But to make absolutely certain that this hitch will work for you I called my technical contact at Draw-Tite. Draw-Tite confirmed that this 2-inch hitch # 75579 will fit just fine on your van. I linked for you a video showing this hitch being installed on a 2008 T&C. If you also need a wiring harness for a trailer you can use Tekonsha 4-pole kit # 118552. This will provide a 4-pole trailer connector to deliver lighting signals and it will also protect the van's wiring from electrical faults. An install video for this item is included too.