Adding a 7-Way Trailer Connector to a 2011 Chrysler Town and Country
Updated 05/27/2020 | Published 06/06/2018
Products Featured in This Question
Question:
Non stock replacement install 2011 Chrysler TandC - can I use this for van that did not come with OEM 7way or tow package? Also have read that my TandC has a trans cooler already in place and cooler not necessarily needed - is this correct?
asked by: Damny
Expert Reply:
You can use trailer wiring harness # 22121 to add a 7-Way to your 2011 Chrysler Town and Country that did not come with a factory 7-Way or tow package. If you also need a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable.
All vehicles with automatic transmissions have some type of cooler. It is usually built into the radiator. However factory coolers are adequate at best for cooling transmission fluid so if you are towing then it would be a good idea to add a supplemental cooler such as # D13503.
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Differences Between the Redarc Tow Pro Liberty and Tow Pro Elite
- Q&A: 7-Way Wiring Diagram for Trailer Wiring That Doesnt have a Purple Wire
- Q&A: Installing Trailer Brake Controller on 2007 Ford Explorer Sport Trac
- Q&A: How to Install a Brake Controller on a 2007 Ford Explorer with a 4-Way Factory Connector
- Q&A: Installation of 7-Way Connector on a 2007 Ford Explorer with Towing Package and Factory 4-Way
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Wiring Diagram and Instructions for a Tekonsha Prodigy P3 Brake Controller
- Q&A: Troubleshooting A MaxxAir MaxxFan That Opens But Doesn't Close
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Trailer Wiring Diagrams
Dave K.
5/25/2020
What 7 way bracket fits the Teckonsha 22121 wiring kit socket that has 21/2" wide by 1 3/4" high hole spacing