To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed to look like the factory lights on 2007-2014 Chevy and GM trucks, these roof lights make your vehicle more visible to traffic and give it a big rig look. Amber lenses cover the bright, long-lasting amber LEDs. Wiring and hardware included.
Features:
Specs:
Installation
These truck cab lights come with everything you need for an easy installation. The illustrated instructions include a handy template that you can use to drill holes for mounting the lights. And the wiring diagram walks you through every step to make sure everything operates as it should. The light bases conform to both flat and curved surfaces for a tight fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a look at the Pacer Performance Hi-Five LED truck cab light kit. Now this is going to be styled after the 2007 to 2014 Chevy and GM factory roof lights on those trucks, so this is either going to replace that for you, or just give you some lights on the top of your vehicle to match with those. You'll get one longer light bar and then the two smaller ones to go on either side, so this is going to give you a total of five points of light. We'll have two LEDs per our smaller ones, but they're kind of bunched together so it really just looks like one light, and then three clusters in our longer one.It also comes with the quick splices, a switch, a length of red wire with a fuse in place, some other hardware, long bolts, and the screws for the switch, as well as some little rubber washers to put over those screws to help maintain a more water tight fit for this, so most of the things that you'll probably need for your install. One thing that's important to keep in mind with this is that you do have to make some modifications to the vehicle that you're mounting this to.
You're going to have to drill in through your roof to get this mounted up. So just keep that in mind. So if you don't feel terribly comfortable with drilling a little hole through your roof line, you might want to find another solution. Really not that hard to do, just something to keep in mind there.Now one thing I want to show you guys before we move too much further forward is what those lights look like when they are illuminated. So I'm going to connect my power and ground, you can see that light comes on there.
So not super bright, but enough to give you that big rig look for your yourself truck, and then I'll hookup a big one as well so you can see what that's going to look like. Unfortunately I can't hook them up all at once just with what I've got set up here today. We'll connect our power and our ground again for that big guy, and I'm going to turn the lights out in the studio so you can get a better idea of what that looks like. So we'll have our three little clusters of three for that light. This isn't going to cause any issues with other drivers being blinded by your lights, it just gives you that big rig style, as I mentioned.Turn our lights back on, and we'll go over the rest of the specs.
Now these are LEDs, so that means you don't really have to worry about ever having to change out the bulbs. Once they're installed, they should be good for a very long time, pretty much the lifetime of the light itself. And that also means that we won't have to worry about too much power being drawn from our factory system, or from our factory lighting. It's not going to require a lot to run those, and they're not going to get too hot. A lot of times with incandescent bulbs, those can be the big issues is the heat and the power that they require, as well as having those bulbs to replace because of the brittle filaments breaking down over time.
But no worries with that with this, since we've got our LEDs.Again, we do get that little toggle switch. So you can run this a couple of different ways. You can wire it into your factory running light circuit if you want, or you can run this directly to a switch powered off your battery, and be able to turn those on and off manually from there. So you can mount this up somewhere on your dash, it's not terribly huge. So it should be able to fit just about anywhere you'd want it, maybe down lower on your dash or up closer to your air vent or something. You just want to make sure that wherever you mount this it isn't going to interfere with any of your other wiring, of course you don't want to mess with your airbag, or anything like that, and just find a good spot for it that you can reach it without having to really stretch and impair your driving or anything like that.The quick splices that come with the kit, these do an okay job of making your wiring connections. I would honestly suggest switching these out for something a little bit more durable. In our experience here, anytime I've seen these, they typically will come apart. They just press close with this little latch, and if they get bumped or jostled, and whenever you're going down the road, you can hit a pothole or something, these can get jostled loose. So I just don't have a lot of faith in these little quick splices. I would suggest getting just a regular butt connector, insulated butt connector, or even a heat shrink.This is going to be wired pretty much mostly inside your truck, so you shouldn't have to worry about too much water protection, which is the advantage with the heat shrink butt connectors, but I would definitely suggest something that's a little bit more sturdy with that. Or if you do want to use these, just make sure you crimp them down real well, and then maybe give them some tape and a wire loom to go around them, just to make sure that you get a little extra protection.These are designed to conform to the shape of your roof. So you might notice that they have a little bit of a taper to them, or a little bit of a curve, and then they're going to sit on this large foam pad, so that's also going to help to conform to our roof line. So you'll have the foam pad that's going to provide water protection around the lights, so you shouldn't have any ingress of water there. Again, those screws also come with the little rubber grommets, so as you put that long screw in, it'll have something to seal it up at the top so you don't have to worry about water getting down there.So pretty straightforward install, might just take a little bit of patience a little bit of time, measure twice, cut once whenever it comes to drilling those holes into your cab. It does meet SAE specifications. As far as the sizing, our long light is going to be 15 and a half inches long by two and three eights inches wide, and one and a 16th inch tall. The sidelights are going to be three and three quarter inches long by two and three eights inches wide and one and a 16th inch tall. It is backed by a 60 day limited warranty from Pacer, and that's going to do it for our look at the Pacer Performance Hi-Five LED truck cab light kit..
Ratings & Reviews
The lights are exactly as described, they look nice. Great customer service, fast shipping. Thanks
Product was shipped quickly. Communication was great. Product was exactly what I ordered. The instructions were adequate. However an installation template would have been helpful.
Would definitely buy again. Thank you.
Lights exactly as described. Package came with both LED bulbs and incandescent bulbs. Easy to install. I watched the installation video which was very helpful. I only installed 4 as my vintage truck has a middle rotating beacon.
Great lights looks amazing on my GMC, i could not be happier. I had the installed as no one wants me wiring anything. The LED bulbs are nice and bright. I would recommend these lights to anyone.
Had these lights on my truck for a year now and they work great the installation was pretty easy. I installed them on my ram 1500
Bought these lights about a year ago and they look and work great! The lighting makes a perfect red and they are very bright as well, but that can depend on the bulbs you decide to use. Easy installation too!
The smoked lens look great! On my 2017 black 3500 RAM. Install took about 45 minutes. LED bulbs need to go the right way to work. Shipping was quick, and thanks to Jason and everyone at etrailer for making the ordering process easy.
Purchased and installed the cab lights from etrailer.com. Shipped quickly, reasonably priced and a very easy installation. They look great on the truck. There some great write ups on the web explaining how to easily drop the headliner. Thanks etrailer.
Yay … THANK YOU JILL a Third time is a CHARM! … lol They are beautiful made in USA and exactly what I imagined for my 30 yr old truck. Unfortunately lights aren’t lining up with original overhead lights holes so I will have to move lights a tad closer towards the windshield…yes modifying time..woohoo should a fun modification and lovely new bright touch on this ole truck.
Haven’t installed yet wish me luck on this high boy.. lol
Asap I’ll share photos in future with etrailer Jill and team. Thanks you.
After reading not so good reviews on other cab lights I found these and saw nothing but good things about them and when I had them installed I was more than happy with them. I would recommend to anyone wanting to put cab lights on their truck
The lights were purchased as replacement for the existing lights already on the truck, so all the hard work of drilling the holes and running the wiring was already done. What little installation I had to do was fairly easy, and simple. The lights match the originals exactly and you can't tell them apart from the old ones. The package was shipped promptly and arrived undamaged within a few days. Overall I'm extremely pleased with the order and I will be using your company for future purchases and I will definitely recommend your company to other people who need the type of things you supply.
The product was good quality. BUT! I replaced my lights because they are on a 1997 and the gasket are old. It would have been really nice if the old lamp sockets fit in the new lens cover and maybe a little guidance with rewiring for the LED. It was no big deal but it would have nice to notify of how to retrofit old to new tech! I got it done and works well.
The Pacer Performance High-5 lights on my 1992 Ford F350 are high quality. They fit the original screw holes perfectly. The LED lights are bright. The wire connectors were different, but that was no problem. I cut off the connectors and used crimp-on connectors, then taped the connections securely with electrical tape.
Lights and everything arrived quickly, everything needed was in the packaging. The only thing I did differently was I wired the lights into my existing light switch instead of a separate switch, just bought 16 gauge wire from hardware store. I added some t10 LED lights which look awesome at night! During the day LED or incandescent bulbs are not very visible anyway. Overall awesome product!
One year on, these lights are holding up very well. Installation was pretty simple, I did have to break out a drill to enlarge the factory holes - I believe the factory lights used sheet metal screws to attach to the top of the cab through the lens and these use a metal stud attached to the light base with a nut that tightens from inside the cab (it's been a year and my memory is fuzzy). Outwards though these lights look completely stock. They sealed well and I've experienced no issues with water leaks. 100% suggest these to anyone wanting to replace or upgrade their stock lights to LED while retained the OE look.
Great product, I replaced existing lights with these. Hole pattern was exactly the same as my old lights. I had two issues not related to the product. My old lights only had one wire through the cab. They had a jumper wire that went from bulb socket to mounting screw for the light.
As far as replacing existing lights goes, this product is great.
For a complaint, the instructions nor video showed me what the little rubber washers were for. Since there were 10 of these I assumed they were for the mounting screws. I used mine for lens cover screws.
I also used silicone under foam pad, on top of foam pad, on mounting screws, and after install was complete I added it at base of lens and around base of light. All not needed but cant hurt to keep water out.
Definitely reccomend this companies products.
Look good on the truck, one of the center lights became loose so it was not making great contact and therefore was out. I got it working again, but it was a hassle taking the light off the truck to just spin the light a little bit.
These are great lights, I’m very happy with them and they are a perfect match to my 95 Ram
fairly quick shipping..my truck has never had lights...but have installed them on every truck I've owned ( 4 ), This is my 5th. Everything was in the box. It even came with little washers for the screw heads. I used silicone just in case. I was very skeptical of the supplied ground wires but they all worked!!.. I decided on the old style bulbs this time. Might switch if they don't last then I will go to the LED's. I used a different toggle switch than the one supplied. Really like the set so far. I have never seen a truck like mine with cab lights. Maybe others will try it now?
I like the classic style of the light they look simular to the add on lights from the 70"s pretty easy install comes with everything and the price is fair .
The Reason why I gave 4 stars instead of 5 is as far as I know there is no replacement parts available so if one goes out or lens breaks etc you need the whole kit that's why I bought this 2nd kit my first still works great I bought them maybe four years ago but I'm painting my truck and needed to take the old ones off but the price is pretty good to just buy a new set .
Cab lights turned out great shipping was fast only thing I wish it came with was a template but measuring them out wasn’t that difficult thanks again
Great lights replacing my original ones that came on the truck.
Put the light kit on and they look great. Thanks
I have not put the lights look good amber in front red in the back. it looks pretty simple a few measurements and the hard part is over.I am going to wire mine direct to tail light wires. If I decide to put switch I can do it later
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Dale H.
1/9/2021
lights work great and look great like factory.How about better directions