bing tracking image
  1. Truck Tool Box
  2. UWS
  3. Wheel Well Tool Box
  4. 48 Inch Long
  5. 8 Inch Wide
  6. Silver
UWS Truck Bed Fender Well Toolbox with Drawers - Driver's Side - 3.9 cu ft - Bright Aluminum

UWS Truck Bed Fender Well Toolbox with Drawers - Driver's Side - 3.9 cu ft - Bright Aluminum

Item # UWS01623
lowest price pledge
Retail:$676.47
Our Price: $599.95
You Save: $76.52
Truck Tool Box

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 38 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
48" Long x 24" tall x 8-3/4" wide; 3.9 cubic feet; driver side fender well box with drawer slide, 3 sliding drawers and a paddle handle lock; aluminum construction Lowest Prices for the best truck tool box from UWS. UWS Truck Bed Fender Well Toolbox with Drawers - Driver's Side - 3.9 cu ft - Bright Aluminum part number UWS01623 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Q & A (0)
  • Videos (3)
  • Photos
  • Why etrailer?

UWS Truck Tool Box - UWS01623

  • Wheel Well Tool Box
  • 48 Inch Long
  • 8 Inch Wide
  • Silver
  • 23 Inch Tall
  • Aluminum
  • Driver Side
  • UWS
  • Small Capacity

48" Long x 24" tall x 8-3/4" wide; 3.9 cubic feet; driver side fender well box with drawer slide, 3 sliding drawers and a paddle handle lock; aluminum construction


Features:

  • Mounts on driver's side between the tailgate and fender
  • Heavy-duty, stainless steel latch, with lock located in center of box
  • Aluminum construction with fully welded seams - guaranteed not to rust
  • Large lower section for storage includes 3 drawers with divider bins
  • Beveled lid features:
    • Patented, foam-filled lid provides insulation and protection from the elements
      • Structural foam reinforces shape and strength of lid
    • Lid opens towards the center of the truck bed
    • Dust barrier helps to protect contents from the elements
    • Strong, aircraft-grade steel cable helps lift lid and hold it open a full 90 degrees
    • Piano hinge runs full length of lid
  • Includes 2 sets of keys: 2 keys for the door with drawers and 2 keys for the top lid
  • Made in the USA


Specs:

  • External dimensions: 48" long x 24" tall x 8-3/4" wide
    • External width with lid open: 10"
  • Internal height: 10-1/2"
    • Internal height to bottom of tray: 8"
  • Capacity: 3.9 cu ft of usable space
  • Construction: 0.063 aluminum tread plate
  • Top of box sits 4" above truck bed rails
  • Limited lifetime warranty


diagram of toolbox dimensions

The Fender Well Toolbox puts to use an area of the truck bed typically overlooked for potential storage and organization. The box mounts over the wheel well and uses the space up to the tailgate. The insulated, beveled, single lid opens to a full 90 degrees with the help of two super-duty lift cylinders, which raise the lid and hold it open as you load and unload your gear. The Fender Well box has a top compartment, separate from the lower section of the toolbox. Three commercial-grade, zinc-plated metal, sliding storage drawers with removable dividers are located inside the bottom portion of the box. The Fender Well Toolbox provides an excellent storage solution for fifth wheel applications.



EC30001 Driver Side Fender Well by United Welding Services (UWS)

FW-48-DS-D



This Product Fits The Following Vehicles




Video of UWS Truck Bed Fender Well Toolbox with Drawers - Driver's Side - 3.9 cu ft - Bright Aluminum

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for UWS Truck Bed Fender Well Toolbox with Drawers Review

What's up everybody. It's AJ with etrailer.com. Today, we're gonna be checking out these UWS Toolbox. That's gonna go over the fender well and the bed your truck. And you're gonna be able to have storage of tools up here up top. And then it has builtin drawers down at the bottom.

Let's check it out. Couple things to note would be that these are sold separately. So if you want both of them on the passenger and driver's side, you will have to buy them both separately. Other thing is there have options with colors. So there is a matte black one, much similar to our crossover toolbox back here.

So if that's more the color scheme you wanna go with your truck, you can get that as well. Now mentioning the crossover. They both work well with this to make sure that all your tools are secure and organized in the bed of your truck. Throwing the latch and looking inside. We're gonna have 3.9 cubic feet of space.

So what that means is gonna be 47 inches long. It's gonna be eight inches wide and it's gonna be 11 inches deep. Now, when it comes to mounting the tool boxes, they recommend you get your own hardware, and they want you to drill down here at the front with inch and a quarter holes and to anchor right up here. And then you'll also drill into the sides of the rail to attach it. So somewhere towards the back and then somewhere up here towards the front.

That way it holds up to the side of the rails in place. And then another suggested thing is getting a block of wood or some kind of shim to put in between the fender well and the toolbox to not only take up that space, and so you can drill into that instead of drilling through your fender well. That way you don't risk puncturing anything underneath. Looking down here at the drawer, it has its own lock. It's gonna be a different set of keys than it is for the top, so you have to have two different keys to unlock this. You have the T handle that you turn. Open it up and then you can bring the drawers out. You see they're all about close to the same length, they're just different depths on the insides. You can see there's not as much depth on these top two. And then the bottom one has more depth and even has dividers where you can slide those in. That way if you have smaller items like front connectors, screws, or bolts, you can give them all separated in their own little spot. Another thing to note, especially before you start drill holes is make sure you get the toolbox set in the right space. You want plenty of clearance to open this front part, so you can't have it too close to the tailgate 'cause we'll open that way, and you'll make sure there's space for the drawers too. So make sure you do a test bit of it, sit in there and make sure everything can open and nothing's in the way of closing this or opening that door. But the door open, you can see there is a weather seal around most of the door, but when you go to close it, you'll see it is kind of wide open here on the side. Looking at the top of the box, it's gonna be 48 inches from the front here to the back. It's gonna be 8 3/4 inches wide. And that goes here too. And then it's gonna be 24 1/2 inches tall. So open up here all the way down to the truck bed. The top lids gonna have a piano hinge that goes all the way across, so that's gonna help making it easier to open up that lid. And then also we have one here that's about in the center of the door at the bottom, another piano hinge there just for making easier opening too. Instead of , we do have a cord here on the inside, the mounted cord that's gonna keep the lid from completely going too far back. And then when you go to push it back, it goes right back there along the box. With the lid popped open, there's a few things to check out here, for one is the striker. So if you go to close the lid and over time it doesn't close as easy as it used to, you can actually adjust that, you just loosen these and it can slide from side to side. That way the striker hits here every time like it should and a nice latch. Another thing about the lid, you can see the foam weather seal all the way around, so that's gonna help keep the elements out. And the lid itself is foam injected, so that not only insulates the box, but helps the lid keeps it structure. So this is not hollow that's gonna dent really easy or crush in if you set something heavy on top of it. Closing the lid, I'm gonna show how it has a little bit of an overhang, so the box doesn't just close right there to where there's still kind of a gap, and that one's gonna get in, actually goes pretty far down and over. So that means it's gonna be harder for elements to go up and in. Overall, I think they're a great addition to the back of the truck, depending on your truck bed size, everyone's a little bit different. We got the eight foot bed right here today and this still leaves us some room in the middle to actually be able to use to load stuff, anything we wanna carry. But otherwise, the tools are all organized in the three different boxes and locked up and secure, so that nobody can mess with it when we're not around. So that's gonna be really helpful too. Well, I think that does it. Thanks for hanging out and hope this helped..

0
0

See what our Experts say about this UWS Truck Tool Box



Do you have a question about this Truck Tool Box?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality truck tool box for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate truck tool box information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Test Fit:
Andrew K
Employee Patrick B
Installed by:
Patrick B
Employee Andy C
Installed by:
Andy C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Erin H
Updated by:
Erin H
Employee Manda E
Updated by:
Manda E
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.