Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Provider 215/75R17.5 radial tire and 17-1/2" x 6-3/4" solid-center steel wheel combo is made for serious hauling. The 16-ply tire carries a maximum load of 4,805 lbs at 123 psi, backed by a wheel rated at 6,005 lbs. With its M (81-mph) speed rating, it’s built to keep steady through long highway miles without heat build-up or tread separation. The assembly meets DOT specifications and exceeds FMVSS standards for dependable performance on the road.
Salt, spray, and humid air won’t get to this wheel easily. The heavy-duty steel wheel goes through a zinc phosphate bath, an e-coat acrylic primer, and a baked-on DuPont silver powder coat applied to both sides. That triple layer helps prevent rust and keeps the finish looking clean through seasons of use.
The radial design uses double steel belts and double polyester cords for strength and long life. A nylon tread-firming belt overlay helps prevent tread separation while reducing rolling resistance and heat buildup. The result is a stable, comfortable ride that holds up mile after mile.
This hub-piloted setup centers precisely on the hub for consistent alignment and balance. It uses an 8 on 6-1/2 bolt pattern, a –0.51" offset, and a 4.76" pilot diameter. Flange nuts (sold separately) are required for installation, ensuring a tight, secure mount that stays true under load.
When you’re logging serious mileage, the ability to extend tread life matters. This tire includes tread depth bars for quick wear checks and is regroovable where regulations allow. Every unit is bake tested to make sure the rubber compound holds up over time, so you get the durability you expect from a heavy-duty radial assembly.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at the Taskmaster Provider 215/75R17.5 Radial Tire in a Load Range H, mounted on this 17 and a half inch silver solid center wheel with an offset and an eight on six and a half inch bolt pattern. Now this tire wheel assembly's ideal for heavy duty trucks and trailers. The heavy duty steel wheel with the solid center design is sturdy and corrosion resistant. The finish on it, it's a three step finishing process they use, which will include a zinc phosphate bath, then an eco primer, and then a nice silver powder coat on both sides of the wheel. Now this wheel here, it is a hub piloted wheel, which means it'll center on the hub.
It does require a close fit of the center pilot hole to the hub. The pilot hole diameter right here is 4.76 inches. Now, hub piloted wheels do require the use of flange nuts for installation. Those flange nuts, we do sell separate on our website and they're usually listed on this product page as related product. The flange nut size they use is five eights of an inch by 18.
Now, this wheel does also have a negative offset of 0.51 inches. Now, a negative offset is when the hub mounting surface right back here is behind the center line of the wheel. That negative offset, basically, the center line of the wheel is right here. So this mounting surface over on this side here will be behind the wheel center line and that means it's a negative offset. And negative offset moves the tire away from the center line of the trailer.
Now this is used as a radial tire on it. A radial tire is constructed with double steel belts and double polyester cords for nice long life. It is great for highway use. They do use a nylon tread firming belt overlay around the tire to help prevent tread separation. And the tire itself is baked tested to ensure that the rubber holds up over time.
Now this assembly is created specifically for heavy duty trucks and trailers. It's not intended for use on other vehicles. This assembly does meet the DOT, Department of Transportation specifications, and it will exceed your federal motor vehicle safety standard. A few dimensions on this, on the wheel itself. The diameter, 17 and a half inches. The width on just the wheel, six and three quarter inches. The bolt pattern on this wheel is an eight lug on six and a half inch bolt pattern. And if you wanna measure that, here's your eight holes. It's pretty easy, cause on a wheel that has an even number of lugs, like in this one, eight, the holes are right across from each other. So when you go to measure it, just pick any hole, measure from the center of that hole to the center of the hole right across from it. So on this it'll measure six and a half inches, so it's an eight plug, six and a half inch bolt pattern. Weight capacity on just the wheel is 6,005 pounds and the tire size is always stamped on the side wall. So right here you can see 215/75R17.5. The R means that it is a radial tire. The section width. So the section width right here on the tire is 8.3 inches. Overall diameter from the very bottom to the very top when it's inflated is 30.2 inches. This tire is a Load Range H which means it's a 16 ply rated tire, so it does have a maximum load capacity of 4,805 pounds at 123 psi. And then the last thing I do wanna mention, most all these tires do have a speed rating stamped on them, and the what you can tell is they stamp it on the side wall with a letter designation. So on this one right after the size we just went over, you'll see two numbers for the load index and then they stamp a letter M. Speed rating M will mean that this has an 81 mile per hour speed rating. But that should do it for the review on this Taskmaster Provider 215/75R17.5 Radial Tire in a Load Range H on this 17 and a half inch silver solid center wheel with an offset and an eight on six and a half inch bolt pattern..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Prado
7/15/2019
Still looking great after 2 years unbelievable I recommend.
Ronnie P.
4/4/2020
GREAT - - JUST AS EXPECTED
Jeremy B.
3/8/2021
Still great after a year! Good tread left and rims are holding up well.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
12/29/2022
It looks like your experience with the product or with shopping at etrailer could have gone better. If you would like to add any comments to your review, I would be happy to assist you.