Need Replacement Front Clearance Lights for 2000 Beaver Marquis Motorhome

Updated 06/24/2015 | Published 06/22/2015

Question:

I have a 2000 Beaver Marquis motorhome and the front clearance lights need replacing. The measurements are 4 1/2inch x 1 5/8inch rectangular . It has an attached round piece on the back where the light goes in and attaches by turning it. The round piece is 1 1/4inch attached and bevels to 1 1/8.and is 7/8inch high. There are two numbers on the lens: SAE AP2-80 and TL - 18. The round part goes inside the motorhome with the light inside the round part. I can send a picture if needed but I dont know how to do it so it will have to be done later.

asked by: Gary F

Expert Reply:

The best way to determine which replacement clearance light that you need for your 2000 Beaver Marquis Motorhome, is to locate a part number on the actual housing of the light, typically printed on the backside of the light.

Typically numbers located on the lenses of trailer lights do not give the information needed to locate a replacement. The SAE part number that you found on the lens is just a number that means that lens has passed SAE guidelines and isn't the part number of the light.

Unfortunately I wasn't able to locate a replacement for you by size so if you can email me a picture and any other information that you can obtain from the light, I will be happy to help you locate a replacement light.

expert reply by: Leah S